Skip to content
worldfires
CN · China · –

Taonan City fire, 14 March 2026 洮南市 · Taonan City, Horqin Right Front Banner

Out · last detection 1 Apr 2026, 05:41 UTC

The fire started on 14 March 2026 in Taonan City, China, and satellites saw it burning for 19 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 14,540 hectares from heat detections, spread across 2 municipalities.

Number 23 in China in 2026, of 1158.

GWIS near-real-time perimeter, from the layer that changed in October 2025: this fire is not compared with fires from earlier years, because since then the GWIS layer gives more and larger perimeters.

Burnt area
14,540ha
GWIS perimeter (Copernicus)
Duration
19days
14 Mar 2026 – 1 Apr 2026
Municipalities hit
2
counties
Started on
14 Mar
2026
Heat detections
359
in a single hotspot: 43 MW
Danger at start
3
Very low · FWI index
Average daily power
106MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 14 Mar1 Apr
1 Apr 2026

How it evolved, day by day

14 Mar 2026 · 7 MW · 2 15 Mar 2026 · 268 MW · 36 16 Mar 2026 · 25 MW · 6 17 Mar 2026 · 396 MW · 66 18 Mar 2026 · 70 MW · 10 19 Mar 2026 · 545 MW · 133 20 Mar 2026 · 114 MW · 34 21 Mar 2026 · 20 MW · 3 22 Mar 2026 · 100 MW · 28 23 Mar 2026 · 80 MW · 17 24 Mar 2026 · 33 MW · 12 25 Mar 2026 · 24 MW · 6 26 Mar 2026 · 4 MW · 2 27 Mar 2026 · 3 MW · 1 29 Mar 2026 · 2 MW · 1 1 Apr 2026 · 7 MW · 2
14 Mar 19 Mar 22 Mar 26 Mar

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

Fire front film How it spread from one satellite pass to the next (22 passes) and with what wind. Watch the film

The weather it burned in

17°high
62km/h · peak gust
9%lowest humidity

It had gone 0 days without rain (1 mm or more) when it started. Rain came after the fire: 5.6 mm on 3 Apr.

This area had burned before

14% of the perimeter overlaps earlier fires recorded since 2016: 137 ha in 2018, 722 ha in 2020, 1,002 ha in 2023, 123 ha in 2025.

How big is it?

10 km
It burned the equivalent of 9.2% of the area of London (145 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Taonan City 洮南市 where it started
    14,566 ha
    2.9 %
  2. Horqin Right Front Banner 科尔沁右翼前旗
    133 ha
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area64 ha
Residents≈ 3,600

Inside the perimeter there were about 64 hectares of built-up land and about 3,600 residents (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Very dry air: 14 % of the area in China

Day High Min. humidity Peak gust Rain Danger (FWI)
14 Mar 3.8 °C 9 % 39 km/h 0.0 mm Very low 3
15 Mar 9.1 °C 16 % 48 km/h 0.0 mm Low 8
16 Mar 4.7 °C 15 % 29 km/h 0.0 mm Low 7
17 Mar 9.5 °C 21 % 54 km/h 0.0 mm Low 7
18 Mar -1.7 °C 18 % 62 km/h 0.0 mm Moderate 18
19 Mar 1.6 °C 24 % 61 km/h 0.0 mm Moderate 14
20 Mar 7.5 °C 19 % 30 km/h 0.0 mm Low 7
21 Mar 9.6 °C 20 % 21 km/h 0.0 mm Low 6
22 Mar 12.1 °C 15 % 34 km/h 0.0 mm Low 10
23 Mar 13.7 °C 16 % 32 km/h 0.0 mm Low 11
24 Mar 16.9 °C 21 % 42 km/h 0.0 mm Moderate 15
25 Mar 15.5 °C 20 % 42 km/h 0.0 mm Moderate 14
26 Mar 13.7 °C 23 % 39 km/h 0.2 mm Moderate 12
27 Mar 14.8 °C 17 % 45 km/h 0.0 mm Moderate 11
28 Mar 15.3 °C 14 % 34 km/h 0.0 mm Moderate 14
29 Mar 12.0 °C 17 % 56 km/h 0.0 mm High 28
30 Mar 13.1 °C 16 % 29 km/h 0.0 mm Low 11
31 Mar 16.3 °C 16 % 55 km/h 0.0 mm High 30
1 Apr 10.5 °C 12 % 48 km/h 0.0 mm Moderate 17
2 Apr after 12.6 °C 15 % 37 km/h 0.0 mm Moderate 15
3 Apr after 3.1 °C 52 % 46 km/h 5.6 mm Very low 1

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 7 Mar 2026
After · 8 Apr 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 21 March 2026 the air beside the fire reached 99 µg/m³ of PM2.5. That day averaged 70: 4.7 times the WHO daily guideline (15).

PM2.5 peak99 µg/m³
Days over the guideline10 days
PM10119 µg/m³
Optical depth1.48
12 Mar16 Mar20 Mar24 Mar28 Mar
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 359Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in China

Frequently asked questions

How long did the Taonan City fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 14 March 2026 to 1 April 2026 (19 days). The perimeter dates it from 14 March 2026 to 25 March 2026.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 14,540 hectares (145.4 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Taonan City (14,566 ha, 2.9 %); Horqin Right Front Banner (133 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 16.9 °C, humidity dropped to 9 % and gusts hit 62 km/h. The fire danger index (FWI) reached 30, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of China (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 119 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 25 March 2026 → 1 April 2026.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 119.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 5 polygons grouped in this page.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 14 March 2026 to 25 March 2026. 359 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM3 (Open Data Commons Open Database License 1.0). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.