Skip to content
worldfires
PK · Pakistan ·

Tall fire, October 2022 Hangu, Tall

Out · last detection 15 Oct 2022, 21:16 UTC

The fire started on 15 October 2022 in Tall, Pakistan, and satellites saw it burning for 1 day. Copernicus’s global GWIS system rebuilt a burnt perimeter of 1,147 hectares from heat detections, spread across 2 municipalities.

It is the 32th largest in Khyber Pakhtunkhwa since 2016 (of 41 with a page). Number 12 in Pakistan in 2022, of 12.

Burnt area
1,147ha
GWIS perimeter (Copernicus)
Duration
1day
15 Oct 2022 – 15 Oct 2022
Municipalities hit
2
subdistricts
Started on
15 Oct
2022
Heat detections
30
in a single hotspot: 60 MW
Danger at start
14
Moderate · FWI index
Average daily power
419MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 15 Oct15 Oct

How it evolved, day by day

15 Oct 2022 · 419 MW · 30

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

26°high
24km/h · peak gust
45%lowest humidity

It had gone 12 days without rain (1 mm or more) when it started.

This area had burned before

78% of the perimeter overlaps earlier fires recorded since 2016: 340 ha in 2016, 476 ha in 2019, 369 ha in 2021. Part of it burned more than once, so the yearly figures add up to more than the 891 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 0.7% of the area of London (11 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. 605 ha
    0.9 %
  2. Tall where it started
    545 ha
    0.8 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
15 Oct 26.2 °C 45 % 24 km/h 0.0 mm Moderate 14
16 Oct after 26.5 °C 44 % 26 km/h 0.0 mm Moderate 15
17 Oct after 25.8 °C 46 % 27 km/h 0.2 mm Moderate 16
18 Oct after 25.2 °C 38 % 26 km/h 0.1 mm Moderate 17
19 Oct after 24.5 °C 38 % 32 km/h 0.4 mm Moderate 19
20 Oct after 22.5 °C 42 % 26 km/h 0.0 mm Moderate 15
21 Oct after 24.4 °C 36 % 24 km/h 0.0 mm Moderate 17
22 Oct after 24.8 °C 41 % 28 km/h 0.0 mm Moderate 19
23 Oct after 24.9 °C 43 % 29 km/h 0.0 mm Moderate 20
24 Oct after 23.7 °C 40 % 27 km/h 0.0 mm Moderate 19
25 Oct after 25.2 °C 40 % 28 km/h 0.0 mm Moderate 20

Its twins: fires that started in the same weather

It started with an FWI of 14.2, a minimum humidity of 45% and 12 days without rain. Fires in the area that started in weather like this since 2016: 7.

FWI at the start 14.2
Minimum humidity 45 %
Days without rain 12
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Lower Kurram fire, January 2018
1,021 ha 6 days FWI 8.6 Min. humidity 44 % 55 km away, in 2018

First rain (1 mm or more) after it ended: none in the following ten days.

What happened to them

Fires in the area that started in similar weather: 7. With fewer than 15 we give no figures: they would be more noise than signal.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
24km/h · max. gust

It was considered over on 15 Oct, and not even 1 mm fell in the following ten days: it went out without rain.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 8 Oct 2022
After · 22 Oct 2022

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 16 October 2022 the air beside the fire reached 32 µg/m³ of PM2.5. That day averaged 22: 1.5 times the WHO daily guideline (15).

PM2.5 peak32 µg/m³
Days over the guideline5 days
PM1046 µg/m³
Optical depth0.52
13 Oct15 Oct17 Oct
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 30Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Pakistan

Frequently asked questions

How long did the Tall fire last?
GWIS (Copernicus) dates it between 15 October 2022 and 15 October 2022: 1 day between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 1,147 hectares (11.5 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Hangu (605 ha, 0.9 %); Tall (545 ha, 0.8 %).
What was the weather like?
During the fire the temperature reached 26.2 °C, humidity dropped to 45 % and gusts hit 24 km/h. The fire danger index (FWI) reached 14, class Moderate.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Pakistan (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 1122 · 16 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 1122 · 16.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 30 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM3 (Open Data Commons Open Database License 1.0). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.