Skip to content
worldfires
CA · Canada · –

Stikine Region fire, 23 June 2023 Stikine Region

Out · last detection 15 Jul 2023, 20:34 UTC

The fire started on 23 June 2023 in Stikine Region, Canada, and satellites saw it burning for 23 days. Canada’s CWFIS (Natural Resources Canada) mapped an official burnt perimeter of 13,457 hectares from satellite imagery, spread across a single census subdivision.

It is the 69th largest in British Columbia since 2016 (of 343 with a page). Number 132 in Canada in 2023, of 489.

Compare with…
Burnt area
13,457ha
official perimeter (CWFIS)
Duration
23days
23 Jun 2023 – 15 Jul 2023
Census subdivisions hit
1
municipalities
Started on
23 Jun
2023
Heat detections
890
in a single hotspot: 833 MW
Danger at start
9
Low · FWI index
Average daily power
925MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 23 Jun15 Jul
15 Jul 2023

How it evolved, day by day

25 Jun 2023 · 3,983 MW · 158 27 Jun 2023 · 9 MW · 4 28 Jun 2023 · 5,280 MW · 164 29 Jun 2023 · 314 MW · 22 30 Jun 2023 · 218 MW · 15 3 Jul 2023 · 595 MW · 15 4 Jul 2023 · 1,435 MW · 13 5 Jul 2023 · 1,049 MW · 93 6 Jul 2023 · 329 MW · 37 7 Jul 2023 · 40 MW · 16 8 Jul 2023 · 489 MW · 28 9 Jul 2023 · 208 MW · 57 10 Jul 2023 · 77 MW · 13 11 Jul 2023 · 166 MW · 15 12 Jul 2023 · 519 MW · 29 13 Jul 2023 · 520 MW · 90 14 Jul 2023 · 1,335 MW · 111 15 Jul 2023 · 77 MW · 10
28 Jun 6 Jul 10 Jul 14 Jul

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

24°high
47km/h · peak gust
31%lowest humidity

It had gone 4 days without rain (1 mm or more) when it started. Rain came after the fire: 8.8 mm on 16 Jul.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 8.5% of the area of London (135 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each census subdivision

  1. Stikine Region where it started
    13,245 ha reached on 25 Jun
    0.1 %

Burnt area inside each census subdivision, from crossing the official perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
23 Jun 22.2 °C 43 % 24 km/h 2.4 mm Low 9
24 Jun 21.1 °C 46 % 36 km/h 1.3 mm Very low 2
25 Jun 19.9 °C 38 % 40 km/h 0.3 mm Very low 4
26 Jun 20.4 °C 52 % 35 km/h 1.7 mm Low 8
27 Jun 21.9 °C 34 % 27 km/h 0.0 mm Very low 5
28 Jun 21.0 °C 43 % 44 km/h 2.9 mm Moderate 12
29 Jun 15.6 °C 45 % 44 km/h 2.7 mm Very low 2
30 Jun 13.5 °C 53 % 46 km/h 1.8 mm Very low 3
1 Jul 13.2 °C 40 % 47 km/h 1.2 mm Very low 4
2 Jul 11.7 °C 68 % 44 km/h 0.7 mm Very low 3
3 Jul 19.8 °C 33 % 22 km/h 0.0 mm Very low 4
4 Jul 21.1 °C 38 % 28 km/h 0.1 mm Low 10
5 Jul 22.9 °C 33 % 27 km/h 0.0 mm Moderate 13
6 Jul 20.3 °C 37 % 34 km/h 0.0 mm Moderate 13
7 Jul 23.6 °C 31 % 24 km/h 0.0 mm Moderate 14
8 Jul 24.0 °C 35 % 26 km/h 0.6 mm Moderate 17
9 Jul 23.1 °C 42 % 20 km/h 9.2 mm Low 8
10 Jul 18.0 °C 59 % 36 km/h 6.7 mm Very low 0
11 Jul 17.1 °C 73 % 35 km/h 7.5 mm Very low 0
12 Jul 21.0 °C 38 % 22 km/h 0.4 mm Very low 0
13 Jul 22.2 °C 37 % 17 km/h 0.3 mm Very low 1
14 Jul 23.3 °C 43 % 34 km/h 6.8 mm Very low 2
15 Jul 18.5 °C 61 % 20 km/h 3.8 mm Very low 0
16 Jul after 17.7 °C 66 % 25 km/h 8.8 mm Very low 0

Its twins: fires that started in the same weather

It started with an FWI of 9.3, a minimum humidity of 43% and 4 days without rain. Fires in the area that started in weather like this since 2018: 15.

FWI at the start 9.3
Minimum humidity 43 %
Days without rain 4
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Bulkley-Nechako C fire, July 2018
2,251 ha 29 days FWI 7.1 Min. humidity 44 % 241 km away, in 2018

First rain (1 mm or more) after it ended: 1.4 mm on 29 Aug.

What happened to them

25 days
median duration
2,891 ha
median area
100 %
went past 1,000 ha
4.1 mm
rain at the end (median; 15 of 15 had it)

It was 4.7 times larger than the median of its twins and lasted 23 days, against 25 days.

None of its 15 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. All of them had rain in the ten days after the end: the first rainy day brought a median of 4.1 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

8.8 mmfirst rain
16 Julthe day after it ended
47km/h · max. gust

It was considered over on 15 Jul, and on 16 Jul 8.8 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 15 of 15, with a median of 4.1 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2018.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 16 Jun 2023
After · 22 Jul 2023

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 15 July 2023 the air beside the fire reached 83 µg/m³ of PM2.5. That day averaged 70: 4.7 times the WHO daily guideline (15).

PM2.5 peak83 µg/m³
Days over the guideline13 days
PM10119 µg/m³
Optical depth3.27
21 Jun27 Jun3 Jul9 Jul15 Jul
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 890Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Frequently asked questions

How long did the Stikine Region fire last?
It burned between 23 June 2023 and 15 July 2023: 23 days, according to the dates recorded by Canada’s CWFIS and the heat detections seen by satellite.
How much area did it burn?
The official perimeter mapped by Canada’s CWFIS (Natural Resources Canada) is 13,457 hectares (134.6 km²). Other tallies, such as those of provincial agencies, may give slightly different figures.
Which census subdivisions burned?
The fire only entered Stikine Region (13,245 ha, 0.1 %).
What was the weather like?
During the fire the temperature reached 24.0 °C, humidity dropped to 31 % and gusts hit 47 km/h. The fire danger index (FWI) reached 17, class Moderate.
Where does this data come from?
From the official burnt perimeter of Canada’s CWFIS (NBAC, Natural Resources Canada) or, for the current season and until NBAC publishes it, the one rebuilt by GWIS (Copernicus); from NASA FIRMS VIIRS hotspots; and from the administrative boundaries of Canada. It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2018 with a similar FWI, humidity and dry spell: 15. Their median duration was 25 days and their median area 2,891 ha; 100 % went past 1,000 ha. None of its 15 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. All of them had rain in the ten days after the end: the first rainy day brought a median of 4.1 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 911 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 911.

How we know this
  • Perimeter: NBAC (Natural Resources Canada), official.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 890 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter is official: it comes from the National Burned Area Composite (NBAC) of the Canadian Wildland Fire Information System (CWFIS), Natural Resources Canada, which maps it on satellite imagery and publishes it under the Open Government Licence – Canada. Until NBAC publishes the current season, this year’s fires carry the perimeter rebuilt from heat detections by GWIS (Copernicus, CC BY 4.0), which is approximate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Census subdivision boundaries come from geoBoundaries ADM3 (Open Data Commons Open Database License 1.0). The area per census subdivision is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ slightly from official figures.