Skip to content
worldfires
CA · Canada · –

Stikine Region fire, 21 August 2018 Stikine Region

Out · last detection 24 Aug 2018, 12:08 UTC

The fire started on 21 August 2018 in Stikine Region, Canada, and satellites saw it burning for 3 days. Canada’s CWFIS (Natural Resources Canada) mapped an official burnt perimeter of 3,297 hectares from satellite imagery, spread across a single census subdivision.

It is the 192th largest in British Columbia since 2016 (of 347 with a page). Number 110 in Canada in 2018, of 211.

Burnt area
3,297ha
official perimeter (CWFIS)
Duration
3days
21 Aug 2018 – 23 Aug 2018
Census subdivisions hit
1
municipalities
Started on
21 Aug
2018
Heat detections
579
in a single hotspot: 466 MW
Danger at start
15
Moderate · FWI index
Average daily power
1.2GW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 21 Aug23 Aug
24 Aug 2018

How it evolved, day by day

21 Aug 2018 · 1,418 MW · 23 22 Aug 2018 · 2,675 MW · 350 23 Aug 2018 · 375 MW · 135 24 Aug 2018 · 167 MW · 65
21 Aug 22 Aug 23 Aug 24 Aug

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

27°high
76km/h · peak gust
21%lowest humidity

It had gone one day without rain (1 mm or more) when it started. Rain came after the fire: 15.5 mm on 28 Aug.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 2.1% of the area of London (33 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each census subdivision

  1. Stikine Region where it started
    3,435 ha
    0.0 %

Burnt area inside each census subdivision, from crossing the official perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
12 Aug 21.2 °C 37 % 37 km/h 0.0 mm Moderate 15
13 Aug 21.7 °C 37 % 68 km/h 0.0 mm High 29
14 Aug 20.4 °C 32 % 76 km/h 1.5 mm Moderate 18
15 Aug 18.0 °C 35 % 43 km/h 0.0 mm Moderate 21
16 Aug 19.1 °C 29 % 40 km/h 0.0 mm High 24
17 Aug 16.9 °C 33 % 52 km/h 0.0 mm High 29
18 Aug 19.2 °C 27 % 40 km/h 0.0 mm High 25
19 Aug 22.4 °C 21 % 28 km/h 0.0 mm High 25
20 Aug 25.3 °C 30 % 37 km/h 0.0 mm High 28
21 Aug 27.2 °C 24 % 47 km/h 0.0 mm High 34
22 Aug 18.7 °C 32 % 43 km/h 0.0 mm High 34
23 Aug 17.2 °C 50 % 40 km/h 0.6 mm High 22
24 Aug after 14.2 °C 54 % 36 km/h 0.8 mm Moderate 19
25 Aug after 15.2 °C 55 % 55 km/h 1.8 mm Low 7
26 Aug after 18.2 °C 33 % 39 km/h 0.0 mm Moderate 12
27 Aug after 16.5 °C 59 % 46 km/h 1.5 mm Low 7
28 Aug after 14.3 °C 76 % 35 km/h 15.5 mm Very low 0

Its twins: fires that started in the same weather

It started with an FWI of 15.3, a minimum humidity of 24% and 1 day without rain. Fires in the area that started in weather like this since 2016: 15.

FWI at the start 15.3
Minimum humidity 24 %
Days without rain 1
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Stikine Region fire, July 2022
10,968 ha 103 days FWI 20.2 Min. humidity 25 % 28 km away, in 2022

First rain (1 mm or more) after it ended: 1.8 mm on 14 Oct.

What happened to them

41 days
median duration
9,950 ha
median area
47 %
went past 10,000 ha
5.8 mm
rain at the end (median; 14 of 15 had it)

It stayed below its twins: 3,297 ha against a median of 9,950 ha. It lasted 3 days, against 41 days.

In 1 of 15, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 5.8 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

15.5 mmfirst rain
28 Aug5 days after it ended
76km/h · max. gust

It was considered over on 23 Aug, and on 28 Aug 15.5 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 14 of 15, with a median of 5.8 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 14 Aug 2018
After · 30 Aug 2018

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 579Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Canada

Frequently asked questions

How long did the Stikine Region fire last?
It burned between 21 August 2018 and 23 August 2018: 3 days, according to the dates recorded by Canada’s CWFIS and the heat detections seen by satellite.
How much area did it burn?
The official perimeter mapped by Canada’s CWFIS (Natural Resources Canada) is 3,297 hectares (33.0 km²). Other tallies, such as those of provincial agencies, may give slightly different figures.
Which census subdivisions burned?
The fire only entered Stikine Region (3,435 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 27.2 °C, humidity dropped to 21 % and gusts hit 76 km/h. The fire danger index (FWI) reached 34, class High.
Where does this data come from?
From the official burnt perimeter of Canada’s CWFIS (NBAC, Natural Resources Canada) or, for the current season and until NBAC publishes it, the one rebuilt by GWIS (Copernicus); from NASA FIRMS VIIRS hotspots; and from the administrative boundaries of Canada. It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 15. Their median duration was 41 days and their median area 9,950 ha; 47 % went past 10,000 ha. In 1 of 15, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 5.8 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 911 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 911.

How we know this
  • Perimeter: NBAC (Natural Resources Canada), official.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 579 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter is official: it comes from the National Burned Area Composite (NBAC) of the Canadian Wildland Fire Information System (CWFIS), Natural Resources Canada, which maps it on satellite imagery and publishes it under the Open Government Licence – Canada. Until NBAC publishes the current season, this year’s fires carry the perimeter rebuilt from heat detections by GWIS (Copernicus, CC BY 4.0), which is approximate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Census subdivision boundaries come from geoBoundaries ADM3 (Open Data Commons Open Database License 1.0). The area per census subdivision is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ slightly from official figures.