Skip to content
worldfires
CA · Canada · –

Squamish-Lillooet A fire, July 2026 Squamish-Lillooet A, Cariboo K, Thompson-Nicola E (Bonaparte *

Out · last detection 27 Aug 2026, 11:38 UTC

The fire started on 21 July 2026 in Squamish-Lillooet A, Canada, and satellites saw it burning for 38 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 37,745 hectares from heat detections, spread across 3 municipalities.

Number 11 in Canada in 2026, of 549.

GWIS near-real-time perimeter (Canada, 2025-2026, until NBAC publishes its own): this fire is not compared with fires from earlier years.

Burnt area
37,745ha
GWIS perimeter (Copernicus)
Duration
38days
21 Jul 2026 – 27 Aug 2026
Municipalities hit
3
municipalities
Started on
21 Jul
2026
Heat detections
5,209
in a single hotspot: 824 MW
Danger at start
14
Moderate · FWI index
Average daily power
2.6GW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 21 Jul27 Aug
27 Aug 2026

How it evolved, day by day

21 Jul 2026 · 723 MW · 11 22 Jul 2026 · 752 MW · 46 23 Jul 2026 · 9,227 MW · 294 24 Jul 2026 · 22,543 MW · 615 25 Jul 2026 · 6,066 MW · 666 26 Jul 2026 · 836 MW · 17 27 Jul 2026 · 87 MW · 31 28 Jul 2026 · 53 MW · 26 29 Jul 2026 · 188 MW · 13 30 Jul 2026 · 10 MW · 1 31 Jul 2026 · 1,293 MW · 22 1 Aug 2026 · 1,131 MW · 203 2 Aug 2026 · 86 MW · 31 3 Aug 2026 · 201 MW · 22 4 Aug 2026 · 2,648 MW · 131 5 Aug 2026 · 13,075 MW · 442 6 Aug 2026 · 6,481 MW · 515 7 Aug 2026 · 3,873 MW · 518 8 Aug 2026 · 3,909 MW · 513 9 Aug 2026 · 631 MW · 224 10 Aug 2026 · 194 MW · 58 11 Aug 2026 · 59 MW · 16 12 Aug 2026 · 3 MW · 2 13 Aug 2026 · 306 MW · 29 14 Aug 2026 · 35 MW · 22 17 Aug 2026 · 8 MW · 3 18 Aug 2026 · 5 MW · 1 19 Aug 2026 · 197 MW · 28 20 Aug 2026 · 216 MW · 36 21 Aug 2026 · 11,728 MW · 264 22 Aug 2026 · 3,252 MW · 388 25 Aug 2026 · 9 MW · 3 26 Aug 2026 · 64 MW · 8 27 Aug 2026 · 14 MW · 10
24 Jul 4 Aug 11 Aug 20 Aug

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

Fire front film How it spread from one satellite pass to the next (98 passes) and with what wind. Watch the film

The weather it burned in

26°high
71km/h · peak gust
18%lowest humidity

It had gone 8 days without rain (1 mm or more) when it started. Rain came after the fire: 1.9 mm on 28 Aug.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 24% of the area of London (377 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Squamish-Lillooet A where it started
    23,423 ha
    6.2 %
  2. 14,311 ha
    1.0 %
  3. 1,756 ha
    0.3 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
21 Jul 23.7 °C 30 % 20 km/h 0.6 mm Moderate 14
22 Jul 26.3 °C 18 % 21 km/h 0.0 mm Moderate 18
23 Jul 24.1 °C 24 % 33 km/h 0.0 mm High 21
24 Jul 22.5 °C 29 % 46 km/h 1.2 mm High 28
25 Jul 16.5 °C 50 % 52 km/h 3.3 mm Low 9
26 Jul 14.2 °C 55 % 49 km/h 1.3 mm Very low 3
27 Jul 14.1 °C 49 % 52 km/h 1.0 mm Low 6
28 Jul 15.4 °C 38 % 71 km/h 1.8 mm Low 6
29 Jul 18.4 °C 27 % 29 km/h 0.0 mm Low 8
30 Jul 18.3 °C 27 % 29 km/h 0.4 mm Moderate 17
31 Jul 21.1 °C 34 % 47 km/h 0.0 mm Moderate 20
1 Aug 13.3 °C 41 % 65 km/h 3.0 mm Low 9
2 Aug 13.5 °C 28 % 44 km/h 0.0 mm Low 8
3 Aug 18.0 °C 27 % 28 km/h 0.0 mm Moderate 12
4 Aug 21.7 °C 24 % 32 km/h 0.0 mm Moderate 15
5 Aug 23.8 °C 21 % 24 km/h 0.0 mm Moderate 20
6 Aug 25.6 °C 21 % 24 km/h 0.0 mm Moderate 20
7 Aug 23.0 °C 28 % 31 km/h 2.2 mm Moderate 21
8 Aug 20.8 °C 29 % 25 km/h 0.9 mm Very low 4
9 Aug 19.7 °C 30 % 23 km/h 1.2 mm Low 7
10 Aug 15.1 °C 66 % 32 km/h 13.5 mm Very low 3
11 Aug 14.8 °C 61 % 29 km/h 7.4 mm Very low 0
12 Aug 15.9 °C 49 % 34 km/h 1.2 mm Very low 0
13 Aug 17.0 °C 43 % 29 km/h 0.8 mm Very low 1
14 Aug 16.8 °C 48 % 23 km/h 6.4 mm Very low 2
15 Aug 15.6 °C 44 % 23 km/h 2.9 mm Very low 0
16 Aug 18.7 °C 41 % 20 km/h 2.0 mm Very low 0
17 Aug 20.2 °C 30 % 28 km/h 0.0 mm Very low 1
18 Aug 22.5 °C 39 % 30 km/h 0.1 mm Low 6
19 Aug 21.4 °C 37 % 23 km/h 0.0 mm Low 7
20 Aug 22.6 °C 33 % 21 km/h 0.1 mm Low 10
21 Aug 24.8 °C 22 % 31 km/h 0.3 mm Moderate 16
22 Aug 21.9 °C 32 % 36 km/h 4.0 mm Moderate 17
23 Aug 15.2 °C 69 % 35 km/h 23.5 mm Very low 0
24 Aug 20.0 °C 41 % 28 km/h 0.3 mm Very low 0
25 Aug 22.0 °C 30 % 39 km/h 0.4 mm Very low 3
26 Aug 20.0 °C 32 % 49 km/h 0.5 mm Low 10
27 Aug 11.3 °C 66 % 37 km/h 3.4 mm Very low 1
28 Aug after 11.6 °C 54 % 31 km/h 1.9 mm Very low 1

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 14 Jul 2026
After · 3 Sept 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 7 August 2026 the air beside the fire reached 358 µg/m³ of PM2.5. That day averaged 221: 15 times the WHO daily guideline (15).

PM2.5 peak358 µg/m³
Days over the guideline35 days
PM10360 µg/m³
Optical depth2.39
19 Jul28 Jul6 Aug15 Aug24 Aug
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 5,209Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Canada

Frequently asked questions

How long did the Squamish-Lillooet A fire last?
GWIS (Copernicus) dates it between 21 July 2026 and 27 August 2026: 38 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 37,745 hectares (377.4 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 3 municipalities: Squamish-Lillooet A (23,423 ha, 6.2 %); Cariboo K (14,311 ha, 1.0 %); Thompson-Nicola E (Bonaparte * (1,756 ha, 0.3 %).
What was the weather like?
During the fire the temperature reached 26.3 °C, humidity dropped to 18 % and gusts hit 71 km/h. The fire danger index (FWI) reached 28, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Canada (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 911 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Area: 39,621 → 37,745 ha.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 911.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 3 polygons grouped in this page.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 5,209 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM3 (Open Data Commons Open Database License 1.0). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.