Skip to content
worldfires
KH · Cambodia · –

Siem Pang fire, 2 February 2026 Siem Pang, Stueng Traeng, Sesan

Out · last detection 21 Mar 2026, 18:12 UTC

The fire started on 2 February 2026 in Siem Pang, Cambodia, and satellites saw it burning for 47 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 22,717 hectares from heat detections, spread across 3 municipalities.

This page is probably a fire complex, not a single fire. GWIS merges into one perimeter the fires that touch over weeks, which in large burning seasons can join dozens of separate fires. The total area is reliable; the origin and dates refer to the whole complex.

Other fire pages in the same area and on the same dates:

Number 3 in Cambodia in 2026, of 120.

GWIS near-real-time perimeter, from the layer that changed in October 2025: this fire is not compared with fires from earlier years, because since then the GWIS layer gives more and larger perimeters.

Burnt area
22,717ha
GWIS perimeter (Copernicus)
Duration
47days
2 Feb 2026 – 20 Mar 2026
Municipalities hit
3
districts
Started on
2 Feb
2026
Heat detections
962
in a single hotspot: 0 MW
Danger at start
37
High · FWI index
Average daily power
133MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 2 Feb20 Mar
21 Mar 2026

How it evolved, day by day

2 Feb 2026 · 87 MW · 18 3 Feb 2026 · 309 MW · 33 4 Feb 2026 · 110 MW · 24 5 Feb 2026 · 29 MW · 7 6 Feb 2026 · 101 MW · 4 7 Feb 2026 · 2 MW · 2 8 Feb 2026 · 145 MW · 32 9 Feb 2026 · 1,047 MW · 132 10 Feb 2026 · 1,052 MW · 122 11 Feb 2026 · 530 MW · 67 12 Feb 2026 · 182 MW · 26 13 Feb 2026 · 117 MW · 34 14 Feb 2026 · 287 MW · 59 15 Feb 2026 · 356 MW · 68 16 Feb 2026 · 216 MW · 47 17 Feb 2026 · 139 MW · 37 18 Feb 2026 · 114 MW · 28 19 Feb 2026 · 45 MW · 21 20 Feb 2026 · 215 MW · 51 21 Feb 2026 · 72 MW · 17 22 Feb 2026 · 41 MW · 6 23 Feb 2026 · 12 MW · 3 24 Feb 2026 · 12 MW · 2 25 Feb 2026 · 73 MW · 7 26 Feb 2026 · 19 MW · 3 28 Feb 2026 · 1 MW · 1 1 Mar 2026 · 1 MW · 1 2 Mar 2026 · 11 MW · 3 3 Mar 2026 · 4 MW · 2 4 Mar 2026 · 5 MW · 1 5 Mar 2026 · 10 MW · 6 7 Mar 2026 · 3 MW · 3 8 Mar 2026 · 45 MW · 15 9 Mar 2026 · 26 MW · 6 10 Mar 2026 · 29 MW · 5 11 Mar 2026 · 79 MW · 11 12 Mar 2026 · 16 MW · 4 14 Mar 2026 · 127 MW · 4 15 Mar 2026 · 78 MW · 12 16 Mar 2026 · 106 MW · 11 17 Mar 2026 · 85 MW · 10 18 Mar 2026 · 41 MW · 6 19 Mar 2026 · 9 MW · 5 20 Mar 2026 · 2 MW · 3 21 Mar 2026 · 2 MW · 3
2 Feb 10 Feb 20 Feb 2 Mar 12 Mar

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

37°high
42km/h · peak gust
30%lowest humidity

It had gone 42 days without rain (1 mm or more) when it started.

This area had burned before

92% of the perimeter overlaps earlier fires recorded since 2016: 6,915 ha in 2016, 10,692 ha in 2017, 1,794 ha in 2018, 129 ha in 2019, 2,978 ha in 2020, 9,944 ha in 2021, 12,982 ha in 2022, 17,507 ha in 2023, 10,718 ha in 2024, 24,331 ha in 2025. Part of it burned more than once, so the yearly figures add up to more than the 20,990 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 14% of the area of London (227 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Siem Pang where it started
    13,445 ha
    2.9 %
  2. 5,916 ha
    8.5 %
  3. 3,667 ha
    1.4 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area0.49 ha
Residents≈ 200

Inside the perimeter there were about 0.49 hectares of built-up land and about 200 residents (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
2 Feb 32.1 °C 40 % 37 km/h 0.0 mm High 37
3 Feb 32.1 °C 44 % 34 km/h 0.0 mm Very high 38
4 Feb 33.4 °C 39 % 26 km/h 0.0 mm High 29
5 Feb 34.3 °C 41 % 24 km/h 0.0 mm High 28
6 Feb 34.4 °C 41 % 23 km/h 0.0 mm High 25
7 Feb 32.3 °C 53 % 26 km/h 0.5 mm High 22
8 Feb 32.1 °C 43 % 40 km/h 0.0 mm High 22
9 Feb 34.8 °C 34 % 37 km/h 0.0 mm High 33
10 Feb 35.0 °C 35 % 32 km/h 0.0 mm High 32
11 Feb 33.9 °C 46 % 32 km/h 0.0 mm High 34
12 Feb 35.6 °C 36 % 28 km/h 0.0 mm High 30
13 Feb 35.9 °C 31 % 31 km/h 0.0 mm High 32
14 Feb 36.5 °C 30 % 29 km/h 0.0 mm High 36
15 Feb 36.7 °C 30 % 30 km/h 0.0 mm Very high 38
16 Feb 36.9 °C 31 % 33 km/h 0.0 mm Very high 38
17 Feb 36.0 °C 34 % 41 km/h 0.0 mm Very high 47
18 Feb 36.9 °C 32 % 38 km/h 0.0 mm Very high 42
19 Feb 35.9 °C 33 % 37 km/h 0.0 mm Very high 39
20 Feb 35.8 °C 31 % 34 km/h 0.0 mm High 37
21 Feb 35.4 °C 32 % 30 km/h 0.0 mm High 31
22 Feb 35.7 °C 40 % 26 km/h 0.0 mm High 30
23 Feb 35.4 °C 43 % 28 km/h 0.0 mm High 28
24 Feb 35.9 °C 40 % 23 km/h 0.0 mm High 26
25 Feb 35.4 °C 39 % 23 km/h 0.0 mm High 28
26 Feb 34.5 °C 44 % 28 km/h 0.6 mm High 28
27 Feb 27.5 °C 76 % 13 km/h 20.3 mm Very low 0
28 Feb 34.3 °C 51 % 17 km/h 0.3 mm Very low 0
1 Mar 34.7 °C 48 % 26 km/h 0.9 mm Low 7
2 Mar 34.8 °C 53 % 26 km/h 1.7 mm Low 11
3 Mar 33.9 °C 54 % 22 km/h 1.9 mm Very low 5
4 Mar 34.3 °C 53 % 22 km/h 18.4 mm Very low 1
5 Mar 29.2 °C 65 % 30 km/h 3.2 mm Very low 1
6 Mar 34.1 °C 49 % 26 km/h 1.3 mm Very low 5
7 Mar 33.4 °C 44 % 28 km/h 0.0 mm Low 9
8 Mar 34.9 °C 36 % 30 km/h 0.0 mm Moderate 15
9 Mar 34.5 °C 41 % 30 km/h 0.1 mm Moderate 17
10 Mar 34.7 °C 40 % 38 km/h 0.0 mm Moderate 20
11 Mar 33.2 °C 44 % 29 km/h 0.0 mm Moderate 17
12 Mar 33.2 °C 45 % 31 km/h 0.0 mm Moderate 19
13 Mar 32.2 °C 44 % 38 km/h 0.8 mm Moderate 21
14 Mar 34.1 °C 42 % 42 km/h 0.1 mm Moderate 20
15 Mar 34.5 °C 37 % 31 km/h 0.0 mm High 22
16 Mar 34.1 °C 40 % 34 km/h 0.0 mm Moderate 20
17 Mar 34.6 °C 39 % 32 km/h 0.0 mm Moderate 20
18 Mar 34.6 °C 40 % 25 km/h 0.0 mm Moderate 18
19 Mar 35.0 °C 43 % 21 km/h 0.1 mm Moderate 19
20 Mar 33.0 °C 55 % 24 km/h 0.9 mm Moderate 18
21 Mar after 35.9 °C 39 % 23 km/h 0.0 mm Moderate 18
22 Mar after 36.6 °C 33 % 26 km/h 0.0 mm Moderate 19
23 Mar after 35.1 °C 41 % 23 km/h 0.0 mm Moderate 19
24 Mar after 36.2 °C 37 % 22 km/h 0.0 mm Moderate 21
25 Mar after 36.5 °C 38 % 21 km/h 0.0 mm Moderate 21
26 Mar after 36.6 °C 37 % 23 km/h 0.0 mm High 22
27 Mar after 36.4 °C 40 % 24 km/h 0.0 mm High 24
28 Mar after 37.9 °C 38 % 21 km/h 0.0 mm High 22
29 Mar after 36.2 °C 40 % 23 km/h 0.0 mm High 26
30 Mar after 37.5 °C 34 % 23 km/h 0.0 mm High 26

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 26 Jan 2026
After · 27 Mar 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 10 February 2026 the air beside the fire reached 126 µg/m³ of PM2.5. That day averaged 38: 2.6 times the WHO daily guideline (15).

PM2.5 peak126 µg/m³
Days over the guideline39 days
PM10128 µg/m³
Optical depth1.53
31 Jan11 Feb22 Feb5 Mar16 Mar
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 0Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Cambodia

Frequently asked questions

How long did the Siem Pang fire last?
GWIS (Copernicus) dates it between 2 February 2026 and 20 March 2026: 47 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 22,717 hectares (227.2 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 3 municipalities: Siem Pang (13,445 ha, 2.9 %); Stueng Traeng (5,916 ha, 8.5 %); Sesan (3,667 ha, 1.4 %).
What was the weather like?
During the fire the temperature reached 36.9 °C, humidity dropped to 30 % and gusts hit 42 km/h. The fire danger index (FWI) reached 47, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Cambodia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Satellite cross-check

History of this page · 8 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 26 March 2026 → 20 March 2026.
  2. Start date: 26 January 2026 → 2 February 2026.
  3. Last day with fire: 20 March 2026 → 26 March 2026.
  4. Start date: 2 February 2026 → 26 January 2026.
  5. Last day with fire: 26 March 2026 → 20 March 2026.
  6. Start date: 26 January 2026 → 2 February 2026.
  7. Last day with fire: 20 March 2026 → 26 March 2026.
  8. Start date: 2 February 2026 → 26 January 2026.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 3 polygons grouped in this page.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. No Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.