Skip to content
worldfires
KH · Cambodia · →

Sesan fire, February 2024 Sesan, Siem Pang

Out · last detection 30 Mar 2024, 18:24 UTC

The fire started on 16 February 2024 in Sesan, Cambodia, and satellites saw it burning for 44 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 6,614 hectares from heat detections, spread across 2 municipalities.

It is the 13th largest in Stung Treng since 2016 (of 130 with a page). Number 4 in Cambodia in 2024, of 44.

Compare with…
Burnt area
6,614ha
GWIS perimeter (Copernicus)
Duration
44days
16 Feb 2024 – 30 Mar 2024
Municipalities hit
2
districts
Started on
16 Feb
2024
Heat detections
652
in a single hotspot: 150 MW
Danger at start
26
High · FWI index
Average daily power
129MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 16 Feb30 Mar
30 Mar 2024

How it evolved, day by day

16 Feb 2024 · 19 MW · 4 17 Feb 2024 · 17 MW · 6 18 Feb 2024 · 149 MW · 21 19 Feb 2024 · 18 MW · 3 20 Feb 2024 · 10 MW · 2 21 Feb 2024 · 1 MW · 1 22 Feb 2024 · 6 MW · 1 23 Feb 2024 · 62 MW · 11 24 Feb 2024 · 78 MW · 16 25 Feb 2024 · 315 MW · 23 26 Feb 2024 · 213 MW · 29 27 Feb 2024 · 40 MW · 13 28 Feb 2024 · 109 MW · 30 29 Feb 2024 · 224 MW · 27 1 Mar 2024 · 271 MW · 26 2 Mar 2024 · 284 MW · 30 3 Mar 2024 · 76 MW · 19 4 Mar 2024 · 36 MW · 5 5 Mar 2024 · 74 MW · 10 6 Mar 2024 · 22 MW · 4 7 Mar 2024 · 53 MW · 13 8 Mar 2024 · 475 MW · 56 9 Mar 2024 · 126 MW · 20 11 Mar 2024 · 159 MW · 24 12 Mar 2024 · 109 MW · 20 13 Mar 2024 · 43 MW · 13 14 Mar 2024 · 11 MW · 4 15 Mar 2024 · 22 MW · 10 16 Mar 2024 · 31 MW · 8 17 Mar 2024 · 422 MW · 17 18 Mar 2024 · 543 MW · 38 19 Mar 2024 · 687 MW · 40 20 Mar 2024 · 223 MW · 28 21 Mar 2024 · 280 MW · 15 22 Mar 2024 · 31 MW · 6 23 Mar 2024 · 69 MW · 6 24 Mar 2024 · 39 MW · 2 25 Mar 2024 · 3 MW · 1 26 Mar 2024 · 105 MW · 21 27 Mar 2024 · 87 MW · 22 28 Mar 2024 · 5 MW · 3 29 Mar 2024 · 1 MW · 2 30 Mar 2024 · 2 MW · 2
16 Feb 23 Feb 1 Mar 8 Mar 16 Mar 19 Mar 23 Mar 30 Mar

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

39°high
40km/h · peak gust
26%lowest humidity

It had gone 15 days without rain (1 mm or more) when it started. Rain came after the fire: 2.0 mm on 28 Mar.

This area had burned before

43% of the perimeter overlaps earlier fires recorded since 2016: 1,107 ha in 2019, 2,065 ha in 2021, 1,089 ha in 2022, 1,425 ha in 2023. Part of it burned more than once, so the yearly figures add up to more than the 2,848 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 4.2% of the area of London (66 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Sesan where it started
    6,528 ha reached on 16 Feb
    2.4 %
  2. 130 ha reached on 27 Feb
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
23 Feb 37.2 °C 39 % 17 km/h 0.0 mm High 26
24 Feb 36.8 °C 37 % 31 km/h 0.0 mm High 30
25 Feb 36.5 °C 32 % 34 km/h 0.0 mm High 34
26 Feb 35.6 °C 37 % 37 km/h 0.0 mm High 34
27 Feb 35.9 °C 40 % 36 km/h 0.0 mm High 36
28 Feb 37.5 °C 32 % 34 km/h 0.0 mm High 34
29 Feb 37.3 °C 36 % 32 km/h 0.0 mm High 34
1 Mar 35.9 °C 38 % 36 km/h 0.0 mm High 37
2 Mar 35.6 °C 38 % 40 km/h 0.0 mm Very high 39
3 Mar 36.8 °C 36 % 34 km/h 0.0 mm High 35
4 Mar 35.7 °C 43 % 23 km/h 0.0 mm High 30
5 Mar 36.2 °C 44 % 25 km/h 0.1 mm High 28
6 Mar 37.5 °C 42 % 21 km/h 0.0 mm High 29
7 Mar 37.6 °C 43 % 24 km/h 0.2 mm High 33
8 Mar 37.7 °C 32 % 35 km/h 0.0 mm High 38
9 Mar 37.2 °C 33 % 27 km/h 0.0 mm High 33
10 Mar 36.7 °C 39 % 29 km/h 0.0 mm High 36
11 Mar 38.1 °C 32 % 34 km/h 0.0 mm High 38
12 Mar 37.4 °C 34 % 33 km/h 0.0 mm High 37
13 Mar 34.2 °C 46 % 27 km/h 0.4 mm High 29
14 Mar 34.2 °C 55 % 22 km/h 0.5 mm High 24
15 Mar 35.8 °C 44 % 19 km/h 0.1 mm High 26
16 Mar 36.0 °C 42 % 17 km/h 0.0 mm High 25
17 Mar 36.3 °C 41 % 19 km/h 0.0 mm High 28
18 Mar 39.0 °C 26 % 24 km/h 0.0 mm High 37
19 Mar 37.4 °C 31 % 34 km/h 0.0 mm Very high 43
20 Mar 35.8 °C 36 % 37 km/h 0.0 mm Very high 40
21 Mar 36.1 °C 35 % 34 km/h 0.0 mm Very high 39
22 Mar 36.8 °C 34 % 28 km/h 0.0 mm High 38
23 Mar 35.0 °C 47 % 20 km/h 0.3 mm High 29
24 Mar 36.7 °C 45 % 22 km/h 0.6 mm High 24
25 Mar 37.4 °C 40 % 19 km/h 0.0 mm High 28
26 Mar 39.2 °C 29 % 26 km/h 0.2 mm Very high 40
27 Mar 38.6 °C 33 % 27 km/h 0.0 mm High 38
28 Mar 36.2 °C 47 % 25 km/h 2.0 mm Moderate 14

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 9 Feb 2024
After · 6 Apr 2024

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 7 March 2024 the air beside the fire reached 60 µg/m³ of PM2.5. That day averaged 37: 2.5 times the WHO daily guideline (15).

PM2.5 peak60 µg/m³
Days over the guideline19 days
PM1089 µg/m³
Optical depth1.56
2122232425262728291234567891011121314151617181920212223242526
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 652Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Cambodia ›

Frequently asked questions

How long did the Sesan fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 16 February 2024 to 30 March 2024 (44 days). The perimeter dates it from 23 February 2024 to 23 March 2024.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 6,614 hectares (66.1 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Sesan (6,528 ha, 2.4 %); Siem Pang (130 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 39.0 °C, humidity dropped to 26 % and gusts hit 40 km/h. The fire danger index (FWI) reached 43, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Cambodia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

No changes since 24 October 2026.

RSS Changes to this page

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 2 polygons grouped in this page.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 23 February 2024 to 23 March 2024. 652 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology ›

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.