Skip to content
worldfires
BR · Brazil · –

Sebastião Leal fire, May 2024 Sebastião Leal, Uruçuí

Out · last detection

The fire started on in Sebastião Leal, Brazil, and satellites saw it burning for 4 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 3,736 hectares from heat detections, spread across 2 municipalities.

It is number 466 by size of the 665 fires with a page that started in Piaui since 2016. Number 985 in Brazil in 2024, of 1301.

Burnt area
3,736ha
GWIS perimeter (Copernicus)
Duration
4days
16 May 2024 – 19 May 2024
Municipalities hit
2
municipalities
Started on
16 May
2024
Heat detections
84
in a single hotspot: 231 MW
Danger at start
29
High · FWI index
Average daily power
1.5GW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 16 May19 May
19 May 2024

How it evolved, day by day

16 May 2024 · 274 MW · 30 18 May 2024 · 4,078 MW · 42 19 May 2024 · 48 MW · 12
16 May 18 May 19 May

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

33°high
40km/h · peak gust
38%lowest humidity

It had gone 22 days without rain (1 mm or more) when it started.

This area had burned before

59% of the perimeter overlaps earlier fires recorded since 2016: 92 ha in 2017, 1,742 ha in 2018, 394 ha in 2019, 1,650 ha in 2021, 108 ha in 2023. Part of it burned more than once, so the yearly figures add up to more than the 2,191 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 2.4% of the area of London (37 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Sebastião Leal 4,446 inhabitants where it started
    3,530 ha reached on 16 May
    1.1 %
  2. Uruçuí 25,203 inhabitants
    231 ha
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
16 May 32.2 °C 38 % 36 km/h 0.0 mm High 29
17 May 32.0 °C 45 % 40 km/h 0.0 mm High 31
18 May 32.6 °C 44 % 36 km/h 0.0 mm High 26
19 May 31.6 °C 51 % 33 km/h 0.3 mm High 29
20 May after 31.3 °C 47 % 35 km/h 0.0 mm High 29
21 May after 32.0 °C 42 % 40 km/h 0.0 mm High 32
22 May after 30.6 °C 52 % 50 km/h 0.2 mm High 34
23 May after 31.3 °C 44 % 41 km/h 0.0 mm High 31
24 May after 32.1 °C 37 % 36 km/h 0.0 mm High 31
25 May after 32.8 °C 37 % 33 km/h 0.0 mm High 31
26 May after 32.6 °C 42 % 38 km/h 0.0 mm High 34
27 May after 32.4 °C 38 % 36 km/h 0.0 mm High 31
28 May after 31.9 °C 40 % 39 km/h 0.0 mm High 36
29 May after 32.6 °C 38 % 35 km/h 0.0 mm High 33

Its twins: fires that started in the same weather

It started with an FWI of 28.9, a minimum humidity of 38% and 22 days without rain. Fires in the area that started in weather like this since 2016: 14.

FWI at the start 28.9
Minimum humidity 38 %
Days without rain 22
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

São Félix de Balsas fire, July 2019
4,416 ha 16 days FWI 39.1 Min. humidity 37 % 92 km away, in 2019

First rain (1 mm or more) after it ended: none in the following ten days.

What happened to them

Fires in the area that started in similar weather: 14. With fewer than 15 we give no figures: they would be more noise than signal.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
40km/h · max. gust

It was considered over on 19 May, and not even 1 mm fell in the following ten days: it went out without rain.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 9 May 2024
After · 26 May 2024

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 20 May 2024 the air beside the fire reached 32 µg/m³ of PM2.5, but no daily average passed the WHO guideline (15).

PM2.5 peak32 µg/m³
Days over the guideline0 days
PM1047 µg/m³
Optical depth0.51
14 May16 May18 May20 May22 May
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 84Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Brazil

Frequently asked questions

How long did the Sebastião Leal fire last?
GWIS (Copernicus) dates it between 16 May 2024 and 19 May 2024: 4 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 3,736 hectares (37.4 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Sebastião Leal (3,530 ha, 1.1 %); Uruçuí (231 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 32.6 °C, humidity dropped to 38 % and gusts hit 40 km/h. The fire danger index (FWI) reached 31, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Brazil (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 193 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 193.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 84 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.