Skip to content
worldfires
IT · Italy · –

Scaletta Zanclea fire, August 2017 Scaletta Zanclea, Itala, Messina

Out · last detection 8 Aug 2017, 01:09 UTC

The fire started on 6 August 2017 in Scaletta Zanclea, Italy, and satellites saw it burning for 3 days. Copernicus mapped a burnt perimeter of 586 hectares from satellite imagery, spread across 3 municipalities.

It is the 9th largest in Messina since 2016 (of 70 with a page). Number 32 in Italy in 2017, of 361.

Burnt area
586ha
Copernicus perimeter
Duration
3days
6 Aug 2017 – 8 Aug 2017
Municipalities hit
3
municipalities
Started on
6 Aug
2017
Heat detections
43
in a single hotspot: 32 MW
Danger at start
43
Very high · FWI index
Average daily power
120MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 6 Aug8 Aug
8 Aug 2017

How it evolved, day by day

6 Aug 2017 · 144 MW · 15 7 Aug 2017 · 210 MW · 25 8 Aug 2017 · 8 MW · 3
6 Aug 7 Aug 8 Aug

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

34°high
34km/h · peak gust
24%lowest humidity

It had gone 20 days without rain (1 mm or more) when it started.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 0.4% of the area of London (5.9 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Scaletta Zanclea 1,836 inhabitants · 0.6 km from the centre where it started
    291 ha reached on 6 Aug
    62 %
  2. Itala 1,513 inhabitants · fire reached the centre
    247 ha reached on 6 Aug
    23 %
  3. Messina 218,786 inhabitants · 16.3 km from the centre
    49 ha reached on 6 Aug
    0.2 %

Burnt area inside each municipality, from crossing the official perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

What burned

  • Agricultural areas53 %
  • Other natural land47 %

Land cover inside the perimeter according to Corine Land Cover, as reported by Copernicus.

People and buildings inside the perimeter

GHSL 2015
Built-up area3.8 ha
Residents≈ 600

Inside the perimeter there were about 3.8 hectares of built-up land and about 600 residents (GHSL 2015, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
6 Aug 33.6 °C 24 % 27 km/h 0.0 mm Very high 43
7 Aug 31.2 °C 44 % 34 km/h 0.0 mm Very high 39
8 Aug 31.9 °C 44 % 25 km/h 0.0 mm High 32
9 Aug after 32.7 °C 32 % 20 km/h 0.0 mm High 28
10 Aug after 33.3 °C 30 % 22 km/h 0.0 mm High 31
11 Aug after 28.3 °C 48 % 49 km/h 0.0 mm High 31
12 Aug after 25.9 °C 47 % 53 km/h 0.0 mm High 33
13 Aug after 25.3 °C 41 % 49 km/h 0.0 mm High 36
14 Aug after 26.3 °C 48 % 39 km/h 0.0 mm High 26
15 Aug after 27.1 °C 44 % 36 km/h 0.0 mm High 26
16 Aug after 26.7 °C 51 % 39 km/h 0.0 mm High 28
17 Aug after 27.2 °C 53 % 36 km/h 0.0 mm High 26
18 Aug after 28.4 °C 49 % 24 km/h 0.0 mm High 22

Its twins: fires that started in the same weather

It started with an FWI of 42.8, a minimum humidity of 24% and 20 days without rain. Fires in the area that started in weather like this since 2016: 21.

FWI at the start 42.8
Minimum humidity 24 %
Days without rain 20
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Aidone fire, August 2020
267 ha 2 days FWI 42.4 Min. humidity 24 % 103 km away, in 2020

First rain (1 mm or more) after it ended: 1.0 mm on 11 Aug.

What happened to them

3 days
median duration
267 ha
median area
5 %
went past 1,000 ha
2.4 mm
rain at the end (median; 11 of 21 had it)

It was 2.2 times larger than the median of its twins and lasted 3 days, against 3 days.

Only 2 of its 21 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 10 of 21, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.4 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
34km/h · max. gust

It was considered over on 8 Aug, and not even 1 mm fell in the following ten days: it went out without rain. Twins with rain when they ended: 11 of 21, with a median of 2.4 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 30 Jul 2017
After · 15 Aug 2017

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 9 August 2017 the air beside the fire reached 31 µg/m³ of PM2.5. That day averaged 22: 1.5 times the WHO daily guideline (15).

PM2.5 peak31 µg/m³
Days over the guideline6 days
PM1046 µg/m³
4 Aug6 Aug8 Aug10 Aug
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 43Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Italy

Frequently asked questions

How long did the Scaletta Zanclea fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 6 August 2017 to 8 August 2017 (3 days). The perimeter dates it from 7 August 2017 to 8 August 2017.
How much area did it burn?
The perimeter Copernicus measured from satellite imagery is 586 hectares (5.9 km²). Official national figures may differ.
Which municipalities burned?
The fire entered 3 municipalities: Scaletta Zanclea (291 ha, 62 %); Itala (247 ha, 23 %); Messina (49 ha, 0.2 %).
Did the fire reach a town?
The fire reached the centre of Itala: the point marking it was inside the burnt area or less than 500 metres from it. That does not mean houses burned.
What was the weather like?
During the fire the temperature reached 33.6 °C, humidity dropped to 24 % and gusts hit 34 km/h. The fire danger index (FWI) reached 43, class Very high.
Where does this data come from?
From the EFFIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Italy (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 21. Their median duration was 3 days and their median area 267 ha; 5 % went past 1,000 ha. Only 2 of its 21 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 10 of 21, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.4 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · 1515 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112 · 1515.

How we know this
  • Perimeter: EFFIS (Copernicus), mapped on satellite imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 7 August 2017 to 8 August 2017. 43 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2015, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter and land cover come from the Copernicus European Forest Fire Information System (EFFIS), measured on MODIS and Sentinel-2 imagery and published under CC BY 4.0. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM4 (Creative Commons Attribution 3.0 License). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ slightly from each country’s official figure.