Skip to content
worldfires
BR · Brazil · –

São José do Peixe fire, October 2025 Flores do Piauí, São José do Peixe

Out · last detection

The fire started on in São José do Peixe, Brazil, and satellites saw it burning for 14 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 7,758 hectares from heat detections, spread across 2 municipalities.

Number 29 in Brazil in 2025, of 188.

GWIS near-real-time perimeter, from the layer that changed in October 2025: this fire is not compared with fires from earlier years, because since then the GWIS layer gives more and larger perimeters.

Burnt area
7,758ha
GWIS perimeter (Copernicus)
Duration
14days
7 Oct 2025 – 20 Oct 2025
Municipalities hit
2
municipalities
Started on
7 Oct
2025
Heat detections
354
in a single hotspot: 190 MW
Danger at start
53
Extreme · FWI index
Average daily power
537MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 7 Oct20 Oct
19 Oct 2025

How it evolved, day by day

7 Oct 2025 · 15 MW · 2 8 Oct 2025 · 62 MW · 16 9 Oct 2025 · 139 MW · 20 10 Oct 2025 · 118 MW · 11 12 Oct 2025 · 24 MW · 11 13 Oct 2025 · 3,419 MW · 89 14 Oct 2025 · 376 MW · 38 15 Oct 2025 · 989 MW · 54 16 Oct 2025 · 1,056 MW · 64 17 Oct 2025 · 113 MW · 29 18 Oct 2025 · 81 MW · 13 19 Oct 2025 · 55 MW · 7
7 Oct 13 Oct 17 Oct

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

38°high
49km/h · peak gust
15%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started. Rain came after the fire: 6.0 mm on 21 Oct.

This area had burned before

92% of the perimeter overlaps earlier fires recorded since 2016: 24 ha in 2016, 5,863 ha in 2018, 185 ha in 2019, 4,013 ha in 2020, 3,106 ha in 2021, 737 ha in 2022, 1,200 ha in 2023. Part of it burned more than once, so the yearly figures add up to more than the 7,103 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 4.9% of the area of London (78 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Flores do Piauí 4,414 inhabitants
    6,721 ha reached on 7 Oct
    7.0 %
  2. São José do Peixe 3,297 inhabitants where it started
    1,085 ha reached on 13 Oct
    0.8 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area0.13 ha
Residents< 20

Inside the perimeter there were about 0.13 hectares of built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Extreme FWI: 46 % of the area in Brazil 60 days without rain: 55 % of the area in Brazil

Day High Min. humidity Peak gust Rain Danger (FWI)
7 Oct 37.3 °C 22 % 41 km/h 0.0 mm Extreme 53
8 Oct 38.5 °C 21 % 45 km/h 0.0 mm Extreme 56
9 Oct 38.0 °C 23 % 47 km/h 0.0 mm Extreme 58
10 Oct 38.0 °C 20 % 49 km/h 0.0 mm Extreme 61
11 Oct 37.8 °C 21 % 46 km/h 0.0 mm Extreme 56
12 Oct 38.4 °C 18 % 42 km/h 0.0 mm Extreme 56
13 Oct 37.9 °C 23 % 45 km/h 0.0 mm Extreme 53
14 Oct 38.2 °C 17 % 37 km/h 0.0 mm Extreme 58
15 Oct 38.1 °C 15 % 44 km/h 0.0 mm Extreme 63
16 Oct 37.8 °C 16 % 47 km/h 0.0 mm Extreme 66
17 Oct 38.2 °C 19 % 44 km/h 0.0 mm Extreme 57
18 Oct 37.4 °C 26 % 42 km/h 0.0 mm Very high 49
19 Oct 37.9 °C 27 % 29 km/h 0.0 mm Very high 45
20 Oct 32.7 °C 44 % 31 km/h 0.4 mm High 36
21 Oct after 30.8 °C 45 % 55 km/h 6.0 mm Moderate 15

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 30 Sept 2025
After · 27 Oct 2025

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 19 October 2025 the air beside the fire reached 43 µg/m³ of PM2.5. That day averaged 27: 1.8 times the WHO daily guideline (15).

PM2.5 peak43 µg/m³
Days over the guideline2 days
PM1044 µg/m³
Optical depth0.65
5 Oct9 Oct13 Oct17 Oct21 Oct
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 354Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Brazil

Frequently asked questions

How long did the São José do Peixe fire last?
GWIS (Copernicus) dates it between 7 October 2025 and 20 October 2025: 14 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 7,758 hectares (77.6 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Flores do Piauí (6,721 ha, 7.0 %); São José do Peixe (1,085 ha, 0.8 %).
What was the weather like?
During the fire the temperature reached 38.5 °C, humidity dropped to 15 % and gusts hit 49 km/h. The fire danger index (FWI) reached 66, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Brazil (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 193 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 193.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 354 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.