Skip to content
worldfires
BR · Brazil · –

Santa Maria do Suaçuí fire, September 2024 Santa Maria do Suaçuí, São José da Safira

Out · last detection

The fire started on in Santa Maria do Suaçuí, Brazil, and satellites saw it burning for 11 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 3,503 hectares from heat detections, spread across 2 municipalities.

It is number 143 by size of the 210 fires with a page that started in Minas Gerais since 2016. Number 1068 in Brazil in 2024, of 1301.

Burnt area
3,503ha
GWIS perimeter (Copernicus)
Duration
11days
14 Sept 2024 – 24 Sept 2024
Municipalities hit
2
municipalities
Started on
14 Sept
2024
Heat detections
112
in a single hotspot: 163 MW
Danger at start
34
High · FWI index
Average daily power
172MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 14 Sept24 Sept
24 Sept 2024

How it evolved, day by day

14 Sept 2024 · 182 MW · 18 15 Sept 2024 · 57 MW · 21 16 Sept 2024 · 481 MW · 12 17 Sept 2024 · 263 MW · 53 21 Sept 2024 · 24 MW · 4 24 Sept 2024 · 25 MW · 4
14 Sept 16 Sept 21 Sept

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

31°high
42km/h · peak gust
21%lowest humidity

It had gone 39 days without rain (1 mm or more) when it started.

This area had burned before

56% of the perimeter overlaps earlier fires recorded since 2016: 82 ha in 2019, 1,871 ha in 2021.

How big is it?

10 km
It burned the equivalent of 2.2% of the area of London (35 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Santa Maria do Suaçuí 12,788 inhabitants where it started
    2,000 ha reached on 14 Sept
    3.2 %
  2. São José da Safira 3,806 inhabitants
    1,523 ha reached on 14 Sept
    7.1 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area4.1 ha
Residents≈ 600

Inside the perimeter there were about 4.1 hectares of built-up land and about 600 residents (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
14 Sept 30.8 °C 21 % 28 km/h 0.0 mm High 34
15 Sept 30.2 °C 29 % 31 km/h 0.0 mm Very high 38
16 Sept 31.2 °C 26 % 27 km/h 0.0 mm High 32
17 Sept 29.7 °C 37 % 42 km/h 0.0 mm High 37
18 Sept 28.5 °C 33 % 36 km/h 0.0 mm High 37
19 Sept 28.6 °C 33 % 30 km/h 0.4 mm High 34
20 Sept 29.2 °C 32 % 28 km/h 0.2 mm High 34
21 Sept 31.1 °C 31 % 28 km/h 0.0 mm High 31
22 Sept 31.0 °C 26 % 33 km/h 0.0 mm High 35
23 Sept 31.1 °C 26 % 32 km/h 0.0 mm High 37
24 Sept 30.7 °C 26 % 32 km/h 0.0 mm High 35
25 Sept after 31.0 °C 24 % 31 km/h 0.0 mm High 35
26 Sept after 31.0 °C 23 % 29 km/h 0.0 mm High 36
27 Sept after 33.4 °C 19 % 26 km/h 0.0 mm Very high 38
28 Sept after 32.4 °C 27 % 42 km/h 0.0 mm Very high 42
29 Sept after 26.4 °C 50 % 32 km/h 0.3 mm High 29
30 Sept after 28.9 °C 36 % 32 km/h 0.5 mm High 31
1 Oct after 30.3 °C 26 % 30 km/h 0.0 mm High 32
2 Oct after 32.6 °C 20 % 23 km/h 0.0 mm High 34
3 Oct after 34.0 °C 19 % 27 km/h 0.0 mm Very high 44
4 Oct after 31.8 °C 30 % 36 km/h 0.0 mm Very high 40

Its twins: fires that started in the same weather

It started with an FWI of 34.4, a minimum humidity of 21% and 39 days without rain. Fires in the area that started in weather like this since 2016: 10.

FWI at the start 34.4
Minimum humidity 21 %
Days without rain 39
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Lassance fire, September 2019
3,173 ha 8 days FWI 33.0 Min. humidity 24 % 249 km away, in 2019

First rain (1 mm or more) after it ended: 8.3 mm on 26 Sept.

What happened to them

Fires in the area that started in similar weather: 10. With fewer than 15 we give no figures: they would be more noise than signal.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
42km/h · max. gust

It was considered over on 24 Sept, and not even 1 mm fell in the following ten days: it went out without rain.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 7 Sept 2024
After · 1 Oct 2024

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 15 September 2024 the air beside the fire reached 13 µg/m³ of PM2.5, but no daily average passed the WHO guideline (15).

PM2.5 peak13 µg/m³
Days over the guideline0 days
PM1020 µg/m³
Optical depth0.67
12 Sept14 Sept16 Sept18 Sept20 Sept
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 112Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Brazil

Frequently asked questions

How long did the Santa Maria do Suaçuí fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 14 September 2024 to 24 September 2024 (11 days). The perimeter dates it from 14 September 2024 to 18 September 2024.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 3,503 hectares (35.0 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Santa Maria do Suaçuí (2,000 ha, 3.2 %); São José da Safira (1,523 ha, 7.1 %).
What was the weather like?
During the fire the temperature reached 31.2 °C, humidity dropped to 21 % and gusts hit 42 km/h. The fire danger index (FWI) reached 38, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Brazil (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 193 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 18 September 2024 → 24 September 2024.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 193.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 14 September 2024 to 18 September 2024. 112 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.