Skip to content
worldfires
BR · Brazil · –

Santa Fé do Araguaia fire, September 2016 Araguaína, Santa Fé do Araguaia

Out · last detection

The fire started on in Santa Fé do Araguaia, Brazil, and satellites saw it burning for 8 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 4,684 hectares from heat detections, spread across 2 municipalities.

It is number 545 by size of the 1036 fires with a page that started in Tocantins since 2016. Number 312 in Brazil in 2016, of 648.

Burnt area
4,684ha
GWIS perimeter (Copernicus)
Duration
8days
2 Sept 2016 – 9 Sept 2016
Municipalities hit
2
municipalities
Started on
2 Sept
2016
Heat detections
129
in a single hotspot: 0 MW
Danger at start
23
High · FWI index
Average daily power
188MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 2 Sept9 Sept
9 Sept 2016

How it evolved, day by day

2 Sept 2016 · 91 MW · 4 3 Sept 2016 · 585 MW · 22 4 Sept 2016 · 417 MW · 23 5 Sept 2016 · 90 MW · 10 6 Sept 2016 · 105 MW · 52 7 Sept 2016 · 24 MW · 16 9 Sept 2016 · 8 MW · 2
3 Sept 6 Sept 9 Sept

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

37°high
36km/h · peak gust
31%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started. Rain came after the fire: 2.0 mm on 18 Sept.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 3% of the area of London (47 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. 3,042 ha
    0.8 %
  2. Santa Fé do Araguaia 7,216 inhabitants where it started
    1,673 ha
    1.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2015
Built-up area0.30 ha
Residents< 20

Inside the perimeter there were about 0.30 hectares of built-up land and almost nobody lived there (GHSL 2015, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with 60 days without rain: 55 % of the area in Brazil

Day High Min. humidity Peak gust Rain Danger (FWI)
2 Sept 34.7 °C 44 % 33 km/h 1.1 mm High 23
3 Sept 34.2 °C 39 % 36 km/h 0.0 mm High 33
4 Sept 35.5 °C 31 % 30 km/h 0.0 mm High 38
5 Sept 36.7 °C 32 % 34 km/h 0.0 mm Very high 47
6 Sept 36.1 °C 37 % 31 km/h 0.0 mm Very high 42
7 Sept 35.5 °C 43 % 31 km/h 0.0 mm Very high 40
8 Sept 34.6 °C 47 % 25 km/h 0.3 mm High 30
9 Sept 33.7 °C 52 % 31 km/h 8.6 mm High 31
10 Sept after 33.0 °C 52 % 40 km/h 0.1 mm Low 5
11 Sept after 36.2 °C 30 % 38 km/h 0.0 mm Very high 41
12 Sept after 34.9 °C 43 % 33 km/h 0.2 mm High 36
13 Sept after 35.7 °C 47 % 32 km/h 0.6 mm High 30
14 Sept after 35.6 °C 44 % 27 km/h 0.2 mm High 24
15 Sept after 35.6 °C 47 % 38 km/h 0.3 mm High 33
16 Sept after 34.7 °C 48 % 31 km/h 0.5 mm High 27
17 Sept after 33.7 °C 48 % 33 km/h 0.9 mm High 28
18 Sept after 32.7 °C 52 % 36 km/h 2.0 mm Low 11

Its twins: fires that started in the same weather

It started with an FWI of 22.9, a minimum humidity of 44% and more than two months without rain. Fires in the area that started in weather like this since 2016: 9.

FWI at the start 22.9
Minimum humidity 44 %
Days without rain 60+
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Tocantinópolis fire, September 2019
3,403 ha 6 days FWI 19.8 Min. humidity 44 % 179 km away, in 2019

First rain (1 mm or more) after it ended: none in the following ten days.

What happened to them

Fires in the area that started in similar weather: 9. With fewer than 15 we give no figures: they would be more noise than signal.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

2.0 mmfirst rain
18 Sept9 days after it ended
36km/h · max. gust

It was considered over on 9 Sept, and on 18 Sept 2.0 mm fell. We do not know whether the rain or the firefighters put it out.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 26 Aug 2016
After · 16 Sept 2016

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 0Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Brazil

Frequently asked questions

How long did the Santa Fé do Araguaia fire last?
GWIS (Copernicus) dates it between 2 September 2016 and 9 September 2016: 8 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 4,684 hectares (46.8 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Araguaína (3,042 ha, 0.8 %); Santa Fé do Araguaia (1,673 ha, 1.0 %).
What was the weather like?
During the fire the temperature reached 36.7 °C, humidity dropped to 31 % and gusts hit 36 km/h. The fire danger index (FWI) reached 47, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Brazil (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 193 · Emergency number and official warnings

Satellite cross-check

History of this page · 4 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 14 September 2016 → 9 September 2016.
  2. Start date: 30 August 2016 → 2 September 2016.
  3. Last day with fire: 9 September 2016 → 14 September 2016.
  4. Start date: 2 September 2016 → 30 August 2016.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 193.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. No Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2015, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.