Skip to content
worldfires
IT · Italy ·

San Vito Lo Capo fire, July 2023 San Vito Lo Capo

Out · last detection

The fire started on in San Vito Lo Capo, Italy, and satellites saw it burning for 1 day. Copernicus mapped a burnt perimeter of 1,100 hectares from satellite imagery, spread across a single municipality.

It is number 7 by size of the 68 fires with a page that started in Trapani since 2016. Number 14 in Italy in 2023, of 207.

Burnt area
1,100ha
Copernicus perimeter
Duration
1day
25 Jul 2023 – 25 Jul 2023
Municipalities hit
1
municipalities
Started on
25 Jul
2023
Heat detections
61
in a single hotspot: 36 MW
Danger at start
83
Very extreme · FWI index
Average daily power
617MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 25 Jul25 Jul

How it evolved, day by day

25 Jul 2023 · 617 MW · 61

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

39°high
57km/h · peak gust
29%lowest humidity

It had gone 39 days without rain (1 mm or more) when it started. Rain came after the fire: 8.6 mm on 4 Aug.

This area had burned before

58% of the perimeter overlaps earlier fires recorded since 2016: 376 ha in 2017, 336 ha in 2019, 287 ha in 2020. Part of it burned more than once, so the yearly figures add up to more than the 636 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 0.7% of the area of London (11 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. San Vito Lo Capo 4,814 inhabitants · fire reached the centre where it started
    1,101 ha reached on 25 Jul
    18 %

Burnt area inside each municipality, from crossing the official perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

What burned

  • Sclerophyllous scrub48 %
  • Other natural land27 %
  • Agricultural areas25 %

Natura 2000 protected area affected: 85 %

Natura 2000 sites (European Environment Agency, 2024 release) crossed by the perimeter.

Land cover inside the perimeter according to Corine Land Cover, as reported by Copernicus.

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Extreme FWI: 22 % of the area in Italy Strong wind: 15 % of the area in Italy

Day High Min. humidity Peak gust Rain Danger (FWI)
25 Jul 38.9 °C 29 % 57 km/h 0.0 mm Very extreme 83
26 Jul after 31.0 °C 41 % 51 km/h 0.0 mm Extreme 55
27 Jul after 31.3 °C 37 % 41 km/h 0.0 mm Very high 42
28 Jul after 33.2 °C 34 % 40 km/h 0.0 mm Very high 48
29 Jul after 34.4 °C 45 % 33 km/h 0.0 mm High 30
30 Jul after 36.6 °C 20 % 40 km/h 0.0 mm Extreme 54
31 Jul after 33.9 °C 34 % 44 km/h 0.0 mm Very high 48
1 Aug after 32.4 °C 46 % 40 km/h 0.0 mm High 38
2 Aug after 33.1 °C 40 % 37 km/h 0.0 mm Very high 40
3 Aug after 34.3 °C 31 % 32 km/h 0.0 mm High 37
4 Aug after 34.6 °C 33 % 46 km/h 8.6 mm Very high 46

Its twins: fires that started in the same weather

It started with an FWI of 82.8, a minimum humidity of 29% and 39 days without rain. Fires in the area that started in weather like this since 2016: 3.

FWI at the start 82.8
Minimum humidity 29 %
Days without rain 39
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

San Vito Lo Capo fire, August 2019
173 ha 1 day FWI 74.5 Min. humidity 29 % 1 km away, in 2019

First rain (1 mm or more) after it ended: none in the following ten days.

What happened to them

Fires in the area that started in similar weather: 3. With fewer than 15 we give no figures: they would be more noise than signal.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

8.6 mmfirst rain
4 Aug10 days after it ended
57km/h · max. gust

It was considered over on 25 Jul, and on 4 Aug 8.6 mm fell. We do not know whether the rain or the firefighters put it out.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 18 Jul 2023
After · 1 Aug 2023

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 28 July 2023 the air beside the fire reached 41 µg/m³ of PM2.5. That day averaged 22: 1.5 times the WHO daily guideline (15).

PM2.5 peak41 µg/m³
Days over the guideline3 days
PM1080 µg/m³
Optical depth0.93
23 Jul25 Jul27 Jul
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 61Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Italy

Frequently asked questions

How long did the San Vito Lo Capo fire last?
Copernicus dates it between 25 July 2023 and 25 July 2023: 1 day between the first and last image with fire.
How much area did it burn?
The perimeter Copernicus measured from satellite imagery is 1,100 hectares (11.0 km²). Official national figures may differ.
Which municipalities burned?
The fire only entered San Vito Lo Capo (1,101 ha, 18 %).
Did the fire reach a town?
The fire started in San Vito Lo Capo and reached its centre: the point marking it was inside the burnt area or less than 500 metres from it. That does not mean houses burned.
What was the weather like?
During the fire the temperature reached 38.9 °C, humidity dropped to 29 % and gusts hit 57 km/h. The fire danger index (FWI) reached 83, class Very extreme.
Where does this data come from?
From the EFFIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Italy (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · 1515 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112 · 1515.

How we know this
  • Perimeter: EFFIS (Copernicus), mapped on satellite imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 61 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.

How we build fire pages: methodology

Where this data comes from

The perimeter and land cover come from the Copernicus European Forest Fire Information System (EFFIS), measured on MODIS and Sentinel-2 imagery and published under CC BY 4.0. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM4 (Creative Commons Attribution 3.0 License). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ slightly from each country’s official figure.