Skip to content
worldfires
BO · Bolivia · –

San Ramón fire, 25 July 2017 San Ramón, San Joaquín

Out · last detection

The fire started on in San Ramón, Bolivia, and satellites saw it burning for 13 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 3,865 hectares from heat detections, spread across 2 municipalities.

It is number 600 by size of the 858 fires with a page that started in Beni since 2016. Number 89 in Bolivia in 2017, of 123.

Burnt area
3,865ha
GWIS perimeter (Copernicus)
Duration
13days
25 Jul 2017 – 6 Aug 2017
Municipalities hit
2
municipalities
Started on
25 Jul
2017
Heat detections
145
in a single hotspot: 83 MW
Danger at start
21
Moderate · FWI index
Average daily power
107MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 25 Jul6 Aug
6 Aug 2017

How it evolved, day by day

26 Jul 2017 · 15 MW · 2 27 Jul 2017 · 9 MW · 2 28 Jul 2017 · 3 MW · 1 29 Jul 2017 · 24 MW · 2 30 Jul 2017 · 57 MW · 12 31 Jul 2017 · 19 MW · 7 1 Aug 2017 · 97 MW · 9 2 Aug 2017 · 319 MW · 10 3 Aug 2017 · 254 MW · 53 4 Aug 2017 · 84 MW · 14 5 Aug 2017 · 402 MW · 32 6 Aug 2017 · 1 MW · 1
26 Jul 29 Jul 1 Aug 5 Aug

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

36°high
50km/h · peak gust
27%lowest humidity

It had gone 45 days without rain (1 mm or more) when it started. Rain came after the fire: 2.4 mm on 13 Aug.

This area had burned before

17% of the perimeter overlaps earlier fires recorded since 2016: 667 ha in 2016.

How big is it?

10 km
It burned the equivalent of 2.4% of the area of London (39 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. San Ramón 5,489 inhabitants where it started
    2,883 ha
    0.4 %
  2. San Joaquín 6,808 inhabitants
    1,006 ha
    0.1 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2015
Built-up area0.51 ha
Residents≈ 30

Inside the perimeter there were about 0.51 hectares of built-up land and about 30 residents (GHSL 2015, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
25 Jul 35.6 °C 38 % 18 km/h 0.0 mm Moderate 21
26 Jul 35.2 °C 36 % 25 km/h 0.0 mm High 27
27 Jul 34.8 °C 28 % 27 km/h 0.0 mm High 30
28 Jul 34.3 °C 27 % 26 km/h 0.0 mm High 35
29 Jul 34.2 °C 30 % 27 km/h 0.0 mm High 36
30 Jul 33.9 °C 36 % 23 km/h 0.0 mm High 30
31 Jul 34.5 °C 32 % 15 km/h 0.0 mm High 25
1 Aug 34.3 °C 35 % 30 km/h 0.0 mm High 35
2 Aug 34.6 °C 37 % 33 km/h 0.0 mm Very high 40
3 Aug 28.1 °C 40 % 50 km/h 0.0 mm Very high 39
4 Aug 31.6 °C 43 % 23 km/h 0.0 mm High 27
5 Aug 33.3 °C 42 % 18 km/h 0.0 mm High 23
6 Aug 34.4 °C 41 % 25 km/h 0.0 mm High 28
7 Aug after 35.6 °C 38 % 35 km/h 0.0 mm Very high 39
8 Aug after 36.1 °C 38 % 41 km/h 0.0 mm Very high 43
9 Aug after 36.3 °C 40 % 29 km/h 0.0 mm High 33
10 Aug after 35.3 °C 45 % 42 km/h 0.4 mm Very high 39
11 Aug after 35.3 °C 46 % 51 km/h 0.3 mm Very high 40
12 Aug after 34.5 °C 48 % 56 km/h 0.3 mm Very high 42
13 Aug after 35.2 °C 45 % 43 km/h 2.4 mm High 36

Its twins: fires that started in the same weather

It started with an FWI of 21.1, a minimum humidity of 38% and 45 days without rain. Fires in the area that started in weather like this since 2016: 25.

FWI at the start 21.1
Minimum humidity 38 %
Days without rain 45
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Exaltación fire, August 2016
5,684 ha 12 days FWI 23.5 Min. humidity 37 % 75 km away, in 2016

First rain (1 mm or more) after it ended: 7.9 mm on 18 Aug.

What happened to them

11 days
median duration
5,684 ha
median area
28 %
went past 10,000 ha
4.8 mm
rain at the end (median; 21 of 25 had it)

It burned an area similar to its twins (3,865 ha against a median of 5,684 ha) and lasted 13 days, against 11 days.

In 4 of 25, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 4.8 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

2.4 mmfirst rain
13 Aug7 days after it ended
50km/h · max. gust

It was considered over on 6 Aug, and on 13 Aug 2.4 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 21 of 25, with a median of 4.8 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 18 Jul 2017
After · 13 Aug 2017

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 145Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Bolivia

Frequently asked questions

How long did the San Ramón fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 25 July 2017 to 6 August 2017 (13 days). The perimeter dates it from 31 July 2017 to 6 August 2017.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 3,865 hectares (38.6 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: San Ramón (2,883 ha, 0.4 %); San Joaquín (1,006 ha, 0.1 %).
What was the weather like?
During the fire the temperature reached 35.6 °C, humidity dropped to 27 % and gusts hit 50 km/h. The fire danger index (FWI) reached 40, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Bolivia (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 25. Their median duration was 11 days and their median area 5,684 ha; 28 % went past 10,000 ha. In 4 of 25, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 4.8 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 119 · 110 · Emergency number and official warnings

Satellite cross-check

History of this page · 2 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Name: San Joaquín → San Ramón.
  2. Start date: 31 July 2017 → 25 July 2017.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 119 · 110.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 31 July 2017 to 6 August 2017. 145 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2015, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM3 (Public Domain). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.