Skip to content
worldfires
BO · Bolivia · –

San Ramón fire, 12 July 2017 San Ramón

Out · last detection 27 Jul 2017, 17:45 UTC

The fire started on 12 July 2017 in San Ramón, Bolivia, and satellites saw it burning for 16 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 3,049 hectares from heat detections, spread across a single municipality.

It is the 840th largest in Beni since 2016 (of 858 with a page). Number 122 in Bolivia in 2017, of 123.

Burnt area
3,049ha
GWIS perimeter (Copernicus)
Duration
16days
12 Jul 2017 – 27 Jul 2017
Municipalities hit
1
municipalities
Started on
12 Jul
2017
Heat detections
137
in a single hotspot: 59 MW
Danger at start
19
Moderate · FWI index
Average daily power
100MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 12 Jul27 Jul
27 Jul 2017

How it evolved, day by day

12 Jul 2017 · 178 MW · 13 13 Jul 2017 · 159 MW · 9 14 Jul 2017 · 94 MW · 15 15 Jul 2017 · 10 MW · 6 16 Jul 2017 · 15 MW · 4 17 Jul 2017 · 309 MW · 19 18 Jul 2017 · 139 MW · 19 19 Jul 2017 · 76 MW · 16 20 Jul 2017 · 98 MW · 17 21 Jul 2017 · 107 MW · 7 22 Jul 2017 · 46 MW · 6 26 Jul 2017 · 16 MW · 1 27 Jul 2017 · 52 MW · 5
12 Jul 17 Jul 21 Jul 27 Jul

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

36°high
52km/h · peak gust
28%lowest humidity

It had gone 32 days without rain (1 mm or more) when it started.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 1.9% of the area of London (30 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. San Ramón 5,489 inhabitants where it started
    3,069 ha
    0.4 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2015
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2015, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
12 Jul 33.3 °C 36 % 19 km/h 0.0 mm Moderate 19
13 Jul 32.9 °C 33 % 18 km/h 0.0 mm Moderate 20
14 Jul 33.1 °C 36 % 28 km/h 0.0 mm High 25
15 Jul 33.3 °C 43 % 37 km/h 0.0 mm High 30
16 Jul 32.8 °C 47 % 40 km/h 0.0 mm High 34
17 Jul 23.4 °C 37 % 52 km/h 0.1 mm High 35
18 Jul 21.0 °C 31 % 44 km/h 0.0 mm High 34
19 Jul 25.1 °C 34 % 32 km/h 0.0 mm High 26
20 Jul 28.5 °C 35 % 23 km/h 0.0 mm High 22
21 Jul 31.1 °C 38 % 18 km/h 0.0 mm Moderate 20
22 Jul 32.4 °C 40 % 18 km/h 0.0 mm Moderate 19
23 Jul 34.0 °C 41 % 32 km/h 0.0 mm High 29
24 Jul 34.8 °C 41 % 26 km/h 0.0 mm High 28
25 Jul 35.5 °C 38 % 17 km/h 0.0 mm Moderate 21
26 Jul 35.0 °C 36 % 24 km/h 0.0 mm High 27
27 Jul 34.8 °C 28 % 27 km/h 0.0 mm High 31
28 Jul after 34.2 °C 27 % 25 km/h 0.0 mm High 35
29 Jul after 34.0 °C 30 % 28 km/h 0.0 mm High 36
30 Jul after 33.8 °C 34 % 23 km/h 0.0 mm High 31
31 Jul after 34.5 °C 31 % 15 km/h 0.0 mm High 26
1 Aug after 34.3 °C 35 % 31 km/h 0.0 mm High 36
2 Aug after 34.5 °C 37 % 34 km/h 0.0 mm Very high 41
3 Aug after 28.1 °C 40 % 50 km/h 0.0 mm Very high 40
4 Aug after 31.7 °C 43 % 22 km/h 0.0 mm High 27
5 Aug after 33.3 °C 41 % 18 km/h 0.0 mm High 22
6 Aug after 34.6 °C 39 % 26 km/h 0.0 mm High 28

Its twins: fires that started in the same weather

It started with an FWI of 19.2, a minimum humidity of 36% and 32 days without rain. Fires in the area that started in weather like this since 2016: 57.

FWI at the start 19.2
Minimum humidity 36 %
Days without rain 32
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Ascención de Guarayos fire, July 2025
9,206 ha 14 days FWI 18.8 Min. humidity 39 % 168 km away, in 2025

First rain (1 mm or more) after it ended: none in the following ten days.

What happened to them

11 days
median duration
6,208 ha
median area
35 %
went past 10,000 ha
4.3 mm
rain at the end (median; 51 of 57 had it)

It stayed below its twins: 3,049 ha against a median of 6,208 ha. It lasted 16 days, against 11 days.

In 6 of 57, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 4.3 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
52km/h · max. gust

It was considered over on 27 Jul, and not even 1 mm fell in the following ten days: it went out without rain. Twins with rain when they ended: 51 of 57, with a median of 4.3 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 5 Jul 2017
After · 3 Aug 2017

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 137Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Bolivia

Frequently asked questions

How long did the San Ramón fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 12 July 2017 to 27 July 2017 (16 days). The perimeter dates it from 12 July 2017 to 21 July 2017.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 3,049 hectares (30.5 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered San Ramón (3,069 ha, 0.4 %).
What was the weather like?
During the fire the temperature reached 35.5 °C, humidity dropped to 28 % and gusts hit 52 km/h. The fire danger index (FWI) reached 35, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Bolivia (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 57. Their median duration was 11 days and their median area 6,208 ha; 35 % went past 10,000 ha. In 6 of 57, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 4.3 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 119 · 110 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 21 July 2017 → 27 July 2017.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 119 · 110.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 12 July 2017 to 21 July 2017. 137 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2015, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM3 (Public Domain). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.