Skip to content
worldfires
BO · Bolivia · –

San Miguel fire, 27 October 2021 San Miguel

Out · last detection 5 Nov 2021, 17:59 UTC

The fire started on 27 October 2021 in San Miguel, Bolivia, and satellites saw it burning for 10 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 10,246 hectares from heat detections, spread across a single municipality.

It is the 202th largest in Santa Cruz since 2016 (of 785 with a page). Number 38 in Bolivia in 2021, of 155.

Burnt area
10,246ha
GWIS perimeter (Copernicus)
Duration
10days
27 Oct 2021 – 5 Nov 2021
Municipalities hit
1
municipalities
Started on
27 Oct
2021
Heat detections
623
in a single hotspot: 65 MW
Danger at start
18
Moderate · FWI index
Average daily power
544MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 27 Oct5 Nov
5 Nov 2021

How it evolved, day by day

27 Oct 2021 · 89 MW · 5 28 Oct 2021 · 567 MW · 92 29 Oct 2021 · 202 MW · 12 30 Oct 2021 · 2,280 MW · 226 31 Oct 2021 · 586 MW · 64 1 Nov 2021 · 62 MW · 24 3 Nov 2021 · 129 MW · 21 4 Nov 2021 · 287 MW · 61 5 Nov 2021 · 694 MW · 118
27 Oct 30 Oct 3 Nov 5 Nov

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

34°high
54km/h · peak gust
44%lowest humidity

It had gone 2 days without rain (1 mm or more) when it started. Rain came after the fire: 19.8 mm on 6 Nov.

This area had burned before

99% of the perimeter overlaps earlier fires recorded since 2016: 7,338 ha in 2016, 9,085 ha in 2017, 7,763 ha in 2018, 13,233 ha in 2019, 5,860 ha in 2020. Part of it burned more than once, so the yearly figures add up to more than the 10,118 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 6.5% of the area of London (102 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. San Miguel 15,329 inhabitants where it started
    10,281 ha
    1.1 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area0.80 ha
Residents≈ 100

Inside the perimeter there were about 0.80 hectares of built-up land and about 100 residents (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
27 Oct 33.4 °C 44 % 25 km/h 0.0 mm Moderate 18
28 Oct 32.8 °C 50 % 27 km/h 1.9 mm Moderate 18
29 Oct 34.1 °C 46 % 32 km/h 1.4 mm Low 10
30 Oct 33.3 °C 45 % 35 km/h 0.3 mm Moderate 12
31 Oct 34.0 °C 47 % 30 km/h 0.5 mm Moderate 18
1 Nov 31.9 °C 56 % 28 km/h 7.0 mm Very low 1
2 Nov 25.4 °C 85 % 24 km/h 20.2 mm Very low 0
3 Nov 31.1 °C 56 % 27 km/h 0.4 mm Very low 0
4 Nov 32.3 °C 52 % 50 km/h 0.0 mm Low 6
5 Nov 31.6 °C 58 % 54 km/h 7.1 mm Moderate 11
6 Nov after 21.7 °C 73 % 44 km/h 19.8 mm Very low 0

Its twins: fires that started in the same weather

It started with an FWI of 17.6, a minimum humidity of 44% and 2 days without rain. Fires in the area that started in weather like this since 2016: 18.

FWI at the start 17.6
Minimum humidity 44 %
Days without rain 2
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

San José fire, October 2018
3,175 ha 19 days FWI 18.1 Min. humidity 44 % 182 km away, in 2018

First rain (1 mm or more) after it ended: 2.8 mm on 20 Oct.

What happened to them

14 days
median duration
4,086 ha
median area
6 %
went past 10,000 ha
6.5 mm
rain at the end (median; 16 of 18 had it)

It was 2.5 times larger than the median of its twins and lasted 10 days, against 14 days.

Only 1 of its 18 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 2 of 18, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 6.5 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

19.8 mmfirst rain
6 Novthe day after it ended
54km/h · max. gust

It was considered over on 5 Nov, and on 6 Nov 19.8 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 16 of 18, with a median of 6.5 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 20 Oct 2021
After · 12 Nov 2021

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 623Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Bolivia

Frequently asked questions

How long did the San Miguel fire last?
GWIS (Copernicus) dates it between 27 October 2021 and 5 November 2021: 10 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 10,246 hectares (102.5 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered San Miguel (10,281 ha, 1.1 %).
What was the weather like?
During the fire the temperature reached 34.1 °C, humidity dropped to 44 % and gusts hit 54 km/h. The fire danger index (FWI) reached 18, class Moderate.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Bolivia (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 18. Their median duration was 14 days and their median area 4,086 ha; 6 % went past 10,000 ha. Only 1 of its 18 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 2 of 18, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 6.5 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 119 · 110 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 119 · 110.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 623 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM3 (Public Domain). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.