Skip to content
worldfires
BO · Bolivia · –

San Miguel fire, November 2020 San Miguel

Out · last detection 26 Nov 2020, 17:07 UTC

The fire started on 14 November 2020 in San Miguel, Bolivia, and satellites saw it burning for 13 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 3,404 hectares from heat detections, spread across a single municipality.

It is the 667th largest in Santa Cruz since 2016 (of 785 with a page). Number 174 in Bolivia in 2020, of 210.

Burnt area
3,404ha
GWIS perimeter (Copernicus)
Duration
13days
14 Nov 2020 – 26 Nov 2020
Municipalities hit
1
municipalities
Started on
14 Nov
2020
Heat detections
212
in a single hotspot: 45 MW
Danger at start
8
Low · FWI index
Average daily power
172MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 14 Nov26 Nov
26 Nov 2020

How it evolved, day by day

14 Nov 2020 · 151 MW · 24 15 Nov 2020 · 94 MW · 21 16 Nov 2020 · 44 MW · 5 17 Nov 2020 · 30 MW · 8 20 Nov 2020 · 232 MW · 8 21 Nov 2020 · 719 MW · 63 22 Nov 2020 · 104 MW · 16 23 Nov 2020 · 6 MW · 4 24 Nov 2020 · 235 MW · 25 25 Nov 2020 · 156 MW · 17 26 Nov 2020 · 117 MW · 21
14 Nov 21 Nov 25 Nov

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

38°high
50km/h · peak gust
28%lowest humidity

It had gone 0 days without rain (1 mm or more) when it started. Rain came after the fire: 8.4 mm on 27 Nov.

This area had burned before

100% of the perimeter overlaps earlier fires recorded since 2016: 1,993 ha in 2016, 3,664 ha in 2017, 2,955 ha in 2018, 4,832 ha in 2019. Part of it burned more than once, so the yearly figures add up to more than the 3,423 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 2.1% of the area of London (34 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. San Miguel 15,329 inhabitants where it started
    3,415 ha
    0.4 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Strong wind: 9.5 % of the area in Bolivia

Day High Min. humidity Peak gust Rain Danger (FWI)
14 Nov 33.5 °C 47 % 50 km/h 0.6 mm Low 8
15 Nov 35.0 °C 44 % 49 km/h 0.2 mm Moderate 15
16 Nov 33.8 °C 48 % 38 km/h 1.8 mm Moderate 14
17 Nov 30.6 °C 62 % 36 km/h 1.0 mm Very low 2
18 Nov 27.7 °C 62 % 47 km/h 10.5 mm Low 7
19 Nov 25.9 °C 53 % 35 km/h 0.4 mm Very low 1
20 Nov 32.7 °C 28 % 27 km/h 0.0 mm Low 10
21 Nov 35.7 °C 31 % 20 km/h 0.0 mm Moderate 16
22 Nov 36.9 °C 32 % 22 km/h 0.0 mm Moderate 18
23 Nov 37.5 °C 31 % 33 km/h 0.0 mm High 25
24 Nov 36.3 °C 38 % 39 km/h 0.0 mm High 25
25 Nov 34.6 °C 47 % 43 km/h 0.2 mm High 25
26 Nov 33.4 °C 49 % 42 km/h 1.0 mm Moderate 18
27 Nov after 27.2 °C 64 % 26 km/h 8.4 mm Low 6

Its twins: fires that started in the same weather

It started with an FWI of 8.0, a minimum humidity of 47% and rain the day before. Fires in the area that started in weather like this since 2016: 16.

FWI at the start 8.0
Minimum humidity 47 %
Days without rain 0
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

San Ignacio fire, September 2017
3,341 ha 12 days FWI 8.0 Min. humidity 45 % 77 km away, in 2017

First rain (1 mm or more) after it ended: 14.1 mm on 27 Sept.

What happened to them

14 days
median duration
3,956 ha
median area
19 %
went past 10,000 ha
6.4 mm
rain at the end (median; 16 of 16 had it)

It burned an area similar to its twins (3,404 ha against a median of 3,956 ha) and lasted 13 days, against 14 days.

All of them had rain in the ten days after the end: the first rainy day brought a median of 6.4 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

8.4 mmfirst rain
27 Novthe day after it ended
50km/h · max. gust

It was considered over on 26 Nov, and on 27 Nov 8.4 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 16 of 16, with a median of 6.4 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 7 Nov 2020
After · 3 Dec 2020

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 212Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Bolivia

Frequently asked questions

How long did the San Miguel fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 14 November 2020 to 26 November 2020 (13 days). The perimeter dates it from 20 November 2020 to 26 November 2020.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 3,404 hectares (34.0 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered San Miguel (3,415 ha, 0.4 %).
What was the weather like?
During the fire the temperature reached 37.5 °C, humidity dropped to 28 % and gusts hit 50 km/h. The fire danger index (FWI) reached 25, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Bolivia (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 16. Their median duration was 14 days and their median area 3,956 ha; 19 % went past 10,000 ha. All of them had rain in the ten days after the end: the first rainy day brought a median of 6.4 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 119 · 110 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Start date: 20 November 2020 → 14 November 2020.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 119 · 110.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 20 November 2020 to 26 November 2020. 212 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM3 (Public Domain). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.