Skip to content
worldfires
BO · Bolivia · –

San Matías fire, 24 August 2020 San Matías

Out · last detection

The fire started on in San Matías, Bolivia, and satellites saw it burning for 27 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 16,495 hectares from heat detections, spread across a single municipality.

It is number 128 by size of the 785 fires with a page that started in Santa Cruz since 2016. Number 31 in Bolivia in 2020, of 210.

Burnt area
16,495ha
GWIS perimeter (Copernicus)
Duration
27days
24 Aug 2020 – 19 Sept 2020
Municipalities hit
1
municipalities
Started on
24 Aug
2020
Heat detections
1,526
in a single hotspot: 150 MW
Danger at start
31
High · FWI index
Average daily power
436MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 24 Aug19 Sept
18 Sept 2020

How it evolved, day by day

24 Aug 2020 · 13 MW · 2 25 Aug 2020 · 704 MW · 54 26 Aug 2020 · 1,839 MW · 68 27 Aug 2020 · 302 MW · 27 28 Aug 2020 · 31 MW · 6 29 Aug 2020 · 151 MW · 18 30 Aug 2020 · 175 MW · 46 31 Aug 2020 · 257 MW · 94 1 Sept 2020 · 47 MW · 15 2 Sept 2020 · 4 MW · 5 3 Sept 2020 · 41 MW · 4 4 Sept 2020 · 48 MW · 10 5 Sept 2020 · 894 MW · 78 6 Sept 2020 · 1,403 MW · 239 7 Sept 2020 · 258 MW · 48 9 Sept 2020 · 73 MW · 17 10 Sept 2020 · 316 MW · 99 11 Sept 2020 · 2,439 MW · 248 12 Sept 2020 · 813 MW · 194 13 Sept 2020 · 397 MW · 83 14 Sept 2020 · 229 MW · 55 15 Sept 2020 · 107 MW · 29 16 Sept 2020 · 273 MW · 66 17 Sept 2020 · 62 MW · 14 18 Sept 2020 · 15 MW · 7
24 Aug 29 Aug 3 Sept 11 Sept

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

40°high
49km/h · peak gust
17%lowest humidity

It had gone 3 days without rain (1 mm or more) when it started. Rain came after the fire: 1.1 mm on 21 Sept.

This area had burned before

33% of the perimeter overlaps earlier fires recorded since 2016: 297 ha in 2016, 2,803 ha in 2017, 1,250 ha in 2018, 2,869 ha in 2019. Part of it burned more than once, so the yearly figures add up to more than the 5,412 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 10% of the area of London (165 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. San Matías 13,073 inhabitants where it started
    17,627 ha
    0.6 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area0.11 ha
Residents< 20

Inside the perimeter there were about 0.11 hectares of built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
24 Aug 34.8 °C 29 % 26 km/h 0.0 mm High 31
25 Aug 37.1 °C 27 % 31 km/h 0.0 mm High 38
26 Aug 37.4 °C 30 % 33 km/h 0.0 mm High 37
27 Aug 38.6 °C 28 % 27 km/h 0.0 mm High 37
28 Aug 38.7 °C 27 % 20 km/h 0.0 mm High 30
29 Aug 39.3 °C 17 % 29 km/h 0.0 mm Extreme 52
30 Aug 37.7 °C 29 % 28 km/h 0.0 mm Very high 48
31 Aug 33.7 °C 34 % 37 km/h 0.0 mm High 35
1 Sept 32.3 °C 39 % 33 km/h 0.0 mm High 33
2 Sept 30.8 °C 34 % 30 km/h 0.0 mm High 34
3 Sept 32.1 °C 33 % 32 km/h 0.0 mm High 29
4 Sept 36.2 °C 29 % 29 km/h 0.0 mm High 36
5 Sept 38.5 °C 18 % 40 km/h 0.0 mm Extreme 65
6 Sept 38.8 °C 18 % 23 km/h 0.0 mm Very high 45
7 Sept 35.1 °C 27 % 38 km/h 0.0 mm Very high 38
8 Sept 32.6 °C 36 % 33 km/h 0.0 mm High 33
9 Sept 38.0 °C 23 % 30 km/h 0.0 mm High 37
10 Sept 39.5 °C 21 % 23 km/h 0.0 mm Very high 41
11 Sept 39.8 °C 18 % 49 km/h 0.0 mm Extreme 68
12 Sept 38.6 °C 23 % 27 km/h 0.0 mm Very high 46
13 Sept 39.3 °C 17 % 33 km/h 0.0 mm Extreme 56
14 Sept 39.0 °C 21 % 46 km/h 0.0 mm Very high 48
15 Sept 32.6 °C 36 % 41 km/h 0.0 mm High 29
16 Sept 38.2 °C 24 % 31 km/h 0.0 mm Very high 44
17 Sept 38.5 °C 19 % 31 km/h 0.0 mm Very high 42
18 Sept 36.8 °C 30 % 20 km/h 0.0 mm High 37
19 Sept 36.5 °C 31 % 22 km/h 0.0 mm High 34
20 Sept after 32.6 °C 43 % 34 km/h 0.0 mm High 35
21 Sept after 27.9 °C 41 % 45 km/h 1.1 mm High 30

Its twins: fires that started in the same weather

It started with an FWI of 30.8, a minimum humidity of 29% and 3 days without rain. Fires in the area that started in weather like this since 2016: 39.

FWI at the start 30.8
Minimum humidity 29 %
Days without rain 3
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Poconé fire, November 2023
16,425 ha 21 days FWI 30.6 Min. humidity 28 % 133 km away, in 2023

First rain (1 mm or more) after it ended: 1.0 mm on 28 Nov.

What happened to them

14 days
median duration
5,600 ha
median area
23 %
went past 10,000 ha
2.7 mm
rain at the end (median; 33 of 39 had it)

It was 2.9 times larger than the median of its twins and lasted 27 days, against 14 days.

Only 4 of its 39 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 6 of 39, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.7 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

1.1 mmfirst rain
21 Sept2 days after it ended
49km/h · max. gust

It was considered over on 19 Sept, and on 21 Sept 1.1 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 33 of 39, with a median of 2.7 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 17 Aug 2020
After · 26 Sept 2020

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 1,526Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Bolivia

Frequently asked questions

How long did the San Matías fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 24 August 2020 to 19 September 2020 (27 days). The perimeter dates it from 25 August 2020 to 19 September 2020.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 16,495 hectares (165.0 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered San Matías (17,627 ha, 0.6 %).
What was the weather like?
During the fire the temperature reached 39.8 °C, humidity dropped to 17 % and gusts hit 49 km/h. The fire danger index (FWI) reached 68, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Bolivia (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 39. Their median duration was 14 days and their median area 5,600 ha; 23 % went past 10,000 ha. Only 4 of its 39 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 6 of 39, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.7 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 119 · 110 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Area: 17,515 → 16,495 ha.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 119 · 110.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 3 polygons grouped in this page.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 25 August 2020 to 19 September 2020. 1,526 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM3 (Public Domain). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.