Skip to content
worldfires
BO · Bolivia · –

San Matías fire, 20 August 2019 San Matías

Out · last detection

The fire started on in San Matías, Bolivia, and satellites saw it burning for 43 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 101,614 hectares from heat detections, spread across a single municipality.

This page is probably a fire complex, not a single fire. GWIS merges into one perimeter the fires that touch over weeks, which in large burning seasons can join dozens of separate fires. The total area is reliable; the origin and dates refer to the whole complex.

Other fire pages in the same area and on the same dates:

It is number 14 by size of the 785 fires with a page that started in Santa Cruz since 2016. Number 7 in Bolivia in 2019, of 218.

Burnt area
101,614ha
GWIS perimeter (Copernicus)
Duration
43days
20 Aug 2019 – 1 Oct 2019
Municipalities hit
1
municipalities
Started on
20 Aug
2019
Heat detections
5,990
in a single hotspot: 301 MW
Danger at start
30
High · FWI index
Average daily power
1.8GW
detected power per day, on average
Perimeter of “San Matías fire, 20 August 2019” on the satellite image of 17 October 2019
Perimeter (GWIS / Copernicus (reconstructed from VIIRS)) on the satellite image of : VIIRS Suomi-NPP (NASA), served by NASA GIBS

Where it burned

HOTSPOTS BY DAY 20 Aug1 Oct
1 Oct 2019

How it evolved, day by day

20 Aug 2019 · 489 MW · 71 21 Aug 2019 · 782 MW · 67 22 Aug 2019 · 299 MW · 59 23 Aug 2019 · 750 MW · 77 24 Aug 2019 · 2,812 MW · 183 25 Aug 2019 · 1,025 MW · 89 26 Aug 2019 · 907 MW · 66 27 Aug 2019 · 7 MW · 2 28 Aug 2019 · 836 MW · 49 29 Aug 2019 · 4,619 MW · 162 30 Aug 2019 · 2,311 MW · 131 31 Aug 2019 · 1,753 MW · 102 1 Sept 2019 · 161 MW · 22 2 Sept 2019 · 161 MW · 25 3 Sept 2019 · 198 MW · 29 4 Sept 2019 · 897 MW · 129 5 Sept 2019 · 87 MW · 14 6 Sept 2019 · 2,198 MW · 160 7 Sept 2019 · 2,885 MW · 336 8 Sept 2019 · 5,539 MW · 533 9 Sept 2019 · 6,033 MW · 510 10 Sept 2019 · 3,091 MW · 273 11 Sept 2019 · 1,805 MW · 219 12 Sept 2019 · 555 MW · 43 13 Sept 2019 · 926 MW · 157 14 Sept 2019 · 1,603 MW · 193 15 Sept 2019 · 9,432 MW · 352 16 Sept 2019 · 4,692 MW · 327 17 Sept 2019 · 3,199 MW · 216 18 Sept 2019 · 993 MW · 106 19 Sept 2019 · 3,630 MW · 297 20 Sept 2019 · 3,354 MW · 237 21 Sept 2019 · 1,753 MW · 198 22 Sept 2019 · 1,132 MW · 82 23 Sept 2019 · 3,042 MW · 256 24 Sept 2019 · 831 MW · 160 27 Sept 2019 · 6 MW · 1 28 Sept 2019 · 303 MW · 13 29 Sept 2019 · 13 MW · 3 30 Sept 2019 · 659 MW · 38 1 Oct 2019 · 4 MW · 3
20 Aug 29 Aug 7 Sept 15 Sept 27 Sept

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

41°high
61km/h · peak gust
22%lowest humidity

It had gone 45 days without rain (1 mm or more) when it started. Rain came after the fire: 23.2 mm on 5 Oct.

This area had burned before

3% of the perimeter overlaps earlier fires recorded since 2016: 724 ha in 2016, 1,337 ha in 2017, 996 ha in 2018. Part of it burned more than once, so the yearly figures add up to more than the 2,813 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 64% of the area of London (1,016 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. San Matías 13,073 inhabitants where it started
    102,334 ha
    3.8 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area1.6 ha
Residents≈ 100

Inside the perimeter there were about 1.6 hectares of built-up land and about 100 residents (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
20 Aug 31.5 °C 39 % 30 km/h 0.0 mm High 30
21 Aug 34.2 °C 36 % 27 km/h 0.0 mm High 32
22 Aug 37.2 °C 36 % 20 km/h 0.0 mm High 31
23 Aug 34.3 °C 38 % 40 km/h 0.0 mm High 36
24 Aug 36.7 °C 33 % 28 km/h 0.0 mm High 36
25 Aug 37.1 °C 33 % 36 km/h 0.0 mm High 34
26 Aug 35.7 °C 40 % 32 km/h 1.0 mm High 34
27 Aug 31.8 °C 48 % 31 km/h 1.2 mm Moderate 13
28 Aug 35.7 °C 38 % 23 km/h 0.0 mm High 23
29 Aug 36.8 °C 34 % 32 km/h 0.0 mm High 37
30 Aug 38.5 °C 32 % 37 km/h 0.0 mm Very high 41
31 Aug 39.0 °C 29 % 41 km/h 0.7 mm Very high 42
1 Sept 30.2 °C 46 % 33 km/h 0.0 mm High 23
2 Sept 33.1 °C 43 % 25 km/h 0.0 mm High 25
3 Sept 36.7 °C 38 % 33 km/h 0.0 mm High 31
4 Sept 36.3 °C 34 % 30 km/h 0.0 mm High 36
5 Sept 36.5 °C 34 % 30 km/h 0.0 mm High 37
6 Sept 38.3 °C 33 % 34 km/h 0.0 mm High 34
7 Sept 39.4 °C 28 % 46 km/h 0.0 mm Very high 49
8 Sept 39.5 °C 24 % 43 km/h 0.0 mm Extreme 58
9 Sept 40.0 °C 22 % 50 km/h 0.0 mm Extreme 67
10 Sept 39.4 °C 24 % 41 km/h 0.0 mm Extreme 58
11 Sept 39.4 °C 27 % 34 km/h 0.0 mm Extreme 52
12 Sept 30.8 °C 45 % 41 km/h 0.0 mm Very high 41
13 Sept 32.3 °C 45 % 32 km/h 0.0 mm High 29
14 Sept 37.4 °C 36 % 19 km/h 0.0 mm High 28
15 Sept 39.9 °C 27 % 36 km/h 0.0 mm Very high 46
16 Sept 40.4 °C 29 % 34 km/h 0.0 mm Very high 46
17 Sept 36.8 °C 35 % 32 km/h 0.0 mm Very high 40
18 Sept 39.1 °C 32 % 34 km/h 0.0 mm Very high 45
19 Sept 38.8 °C 35 % 61 km/h 0.0 mm Extreme 59
20 Sept 40.7 °C 27 % 50 km/h 0.3 mm Extreme 54
21 Sept 35.5 °C 38 % 33 km/h 0.0 mm Very high 41
22 Sept 36.2 °C 35 % 31 km/h 0.0 mm Very high 43
23 Sept 38.3 °C 33 % 34 km/h 0.0 mm Very high 41
24 Sept 38.4 °C 40 % 24 km/h 5.7 mm High 36
25 Sept 30.8 °C 55 % 36 km/h 7.6 mm Very low 4
26 Sept 32.3 °C 46 % 24 km/h 0.9 mm Very low 5
27 Sept 34.9 °C 43 % 25 km/h 0.0 mm Moderate 18
28 Sept 37.1 °C 45 % 28 km/h 0.0 mm High 25
29 Sept 39.0 °C 37 % 27 km/h 0.2 mm High 30
30 Sept 40.2 °C 31 % 37 km/h 0.0 mm Very high 39
1 Oct 38.0 °C 36 % 54 km/h 0.3 mm Very high 45
2 Oct after 34.2 °C 41 % 43 km/h 0.0 mm High 33
3 Oct after 36.8 °C 38 % 24 km/h 0.0 mm High 25
4 Oct after 37.6 °C 31 % 26 km/h 0.0 mm High 31
5 Oct after 30.9 °C 53 % 27 km/h 23.2 mm Very low 5

Its twins: fires that started in the same weather

It started with an FWI of 30.3, a minimum humidity of 39% and 45 days without rain. Fires in the area that started in weather like this since 2016: 28.

FWI at the start 30.3
Minimum humidity 39 %
Days without rain 45
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

San José fire, July 2018
5,892 ha 11 days FWI 27.5 Min. humidity 39 % 237 km away, in 2018

First rain (1 mm or more) after it ended: 2.9 mm on 4 Aug.

What happened to them

16 days
median duration
7,688 ha
median area
36 %
went past 10,000 ha
3.0 mm
rain at the end (median; 26 of 28 had it)

It was 13.2 times larger than the median of its twins and lasted 43 days, against 16 days.

Only 3 of its 28 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 2 of 28, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.0 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

23.2 mmfirst rain
5 Oct4 days after it ended
61km/h · max. gust

It was considered over on 1 Oct, and on 5 Oct 23.2 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 26 of 28, with a median of 3.0 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 13 Aug 2019
After · 8 Oct 2019

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 5,990Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Bolivia

Frequently asked questions

How long did the San Matías fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 20 August 2019 to 1 October 2019 (43 days). The perimeter dates it from 27 August 2019 to 24 September 2019.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 101,614 hectares (1,016.1 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered San Matías (102,334 ha, 3.8 %).
What was the weather like?
During the fire the temperature reached 40.7 °C, humidity dropped to 22 % and gusts hit 61 km/h. The fire danger index (FWI) reached 67, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Bolivia (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 28. Their median duration was 16 days and their median area 7,688 ha; 36 % went past 10,000 ha. Only 3 of its 28 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 2 of 28, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.0 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 119 · 110 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 119 · 110.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 3 polygons grouped in this page.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 27 August 2019 to 24 September 2019. 5,990 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM3 (Public Domain). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.