Skip to content
worldfires
BO · Bolivia · –

San Matías fire, 4 August 2019 San Matías

Out · last detection

The fire started on in San Matías, Bolivia, and satellites saw it burning for 52 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 117,205 hectares from heat detections, spread across a single municipality.

This page is probably a fire complex, not a single fire. GWIS merges into one perimeter the fires that touch over weeks, which in large burning seasons can join dozens of separate fires. The total area is reliable; the origin and dates refer to the whole complex.

Other fire pages in the same area and on the same dates:

It is number 12 by size of the 785 fires with a page that started in Santa Cruz since 2016. Number 5 in Bolivia in 2019, of 218.

Burnt area
117,205ha
GWIS perimeter (Copernicus)
Duration
52days
4 Aug 2019 – 24 Sept 2019
Municipalities hit
1
municipalities
Started on
4 Aug
2019
Heat detections
6,043
in a single hotspot: 332 MW
Danger at start
32
High · FWI index
Average daily power
1.0GW
detected power per day, on average
Perimeter of “San Matías fire, 4 August 2019” on the satellite image of 27 September 2019
Perimeter (GWIS / Copernicus (reconstructed from VIIRS)) on the satellite image of : HLS Sentinel-2 (NASA, Copernicus Sentinel), served by NASA GIBS

Where it burned

HOTSPOTS BY DAY 4 Aug24 Sept
24 Sept 2019

How it evolved, day by day

4 Aug 2019 · 19 MW · 5 5 Aug 2019 · 17 MW · 2 6 Aug 2019 · 14 MW · 3 7 Aug 2019 · 7 MW · 1 8 Aug 2019 · 30 MW · 8 9 Aug 2019 · 65 MW · 7 10 Aug 2019 · 17 MW · 5 11 Aug 2019 · 36 MW · 4 12 Aug 2019 · 262 MW · 26 13 Aug 2019 · 347 MW · 34 14 Aug 2019 · 397 MW · 75 15 Aug 2019 · 722 MW · 31 16 Aug 2019 · 1,630 MW · 94 17 Aug 2019 · 1,500 MW · 86 18 Aug 2019 · 502 MW · 70 19 Aug 2019 · 604 MW · 101 20 Aug 2019 · 646 MW · 120 21 Aug 2019 · 1,566 MW · 171 22 Aug 2019 · 902 MW · 140 23 Aug 2019 · 1,878 MW · 137 24 Aug 2019 · 2,434 MW · 386 25 Aug 2019 · 646 MW · 67 26 Aug 2019 · 683 MW · 91 28 Aug 2019 · 40 MW · 3 29 Aug 2019 · 1,164 MW · 18 30 Aug 2019 · 397 MW · 29 31 Aug 2019 · 953 MW · 66 1 Sept 2019 · 128 MW · 10 2 Sept 2019 · 371 MW · 25 3 Sept 2019 · 420 MW · 37 4 Sept 2019 · 597 MW · 92 5 Sept 2019 · 310 MW · 16 6 Sept 2019 · 2,350 MW · 146 7 Sept 2019 · 1,105 MW · 195 8 Sept 2019 · 1,795 MW · 237 9 Sept 2019 · 8,332 MW · 757 10 Sept 2019 · 3,831 MW · 482 11 Sept 2019 · 393 MW · 69 12 Sept 2019 · 275 MW · 45 13 Sept 2019 · 497 MW · 114 14 Sept 2019 · 1,605 MW · 267 15 Sept 2019 · 2,902 MW · 350 16 Sept 2019 · 2,912 MW · 312 17 Sept 2019 · 1,345 MW · 135 18 Sept 2019 · 235 MW · 89 19 Sept 2019 · 656 MW · 72 20 Sept 2019 · 478 MW · 85 21 Sept 2019 · 477 MW · 94 22 Sept 2019 · 380 MW · 58 23 Sept 2019 · 1,182 MW · 232 24 Sept 2019 · 1,275 MW · 344
4 Aug 15 Aug 26 Aug 9 Sept 18 Sept

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

40°high
59km/h · peak gust
24%lowest humidity

It had gone 29 days without rain (1 mm or more) when it started. Rain came after the fire: 20.0 mm on 25 Sept.

This area had burned before

8% of the perimeter overlaps earlier fires recorded since 2016: 6,323 ha in 2016, 2,267 ha in 2017, 318 ha in 2018.

How big is it?

10 km
It burned the equivalent of 74% of the area of London (1,172 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. San Matías 13,073 inhabitants where it started
    119,075 ha
    4.4 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
4 Aug 25.3 °C 24 % 31 km/h 0.0 mm High 32
5 Aug 28.4 °C 36 % 28 km/h 0.0 mm High 29
6 Aug 32.3 °C 36 % 27 km/h 0.0 mm High 30
7 Aug 35.3 °C 36 % 36 km/h 0.0 mm High 33
8 Aug 35.1 °C 36 % 36 km/h 0.0 mm High 33
9 Aug 34.8 °C 31 % 34 km/h 0.0 mm High 36
10 Aug 29.4 °C 40 % 39 km/h 0.0 mm High 28
11 Aug 34.2 °C 34 % 33 km/h 0.0 mm High 32
12 Aug 36.6 °C 27 % 36 km/h 0.0 mm Very high 46
13 Aug 28.9 °C 37 % 53 km/h 0.0 mm Very high 46
14 Aug 26.5 °C 33 % 34 km/h 0.0 mm High 32
15 Aug 31.9 °C 38 % 27 km/h 0.0 mm High 32
16 Aug 35.2 °C 30 % 32 km/h 0.0 mm High 31
17 Aug 36.4 °C 30 % 55 km/h 0.0 mm Extreme 52
18 Aug 35.9 °C 37 % 52 km/h 0.0 mm Extreme 52
19 Aug 31.7 °C 44 % 30 km/h 0.0 mm High 28
20 Aug 31.8 °C 39 % 26 km/h 0.0 mm High 27
21 Aug 34.2 °C 36 % 22 km/h 0.0 mm High 30
22 Aug 36.5 °C 37 % 22 km/h 0.0 mm High 33
23 Aug 33.5 °C 40 % 41 km/h 0.0 mm High 33
24 Aug 36.0 °C 33 % 31 km/h 0.0 mm Very high 38
25 Aug 36.5 °C 34 % 37 km/h 0.0 mm High 32
26 Aug 34.5 °C 44 % 35 km/h 0.4 mm High 32
27 Aug 32.0 °C 49 % 28 km/h 0.1 mm High 28
28 Aug 35.7 °C 41 % 23 km/h 0.0 mm High 26
29 Aug 37.2 °C 33 % 35 km/h 0.0 mm Very high 40
30 Aug 38.2 °C 33 % 42 km/h 0.0 mm Very high 46
31 Aug 37.9 °C 30 % 45 km/h 0.0 mm Very high 46
1 Sept 30.0 °C 45 % 37 km/h 0.0 mm High 30
2 Sept 33.3 °C 41 % 26 km/h 0.0 mm High 29
3 Sept 35.9 °C 39 % 29 km/h 0.0 mm High 30
4 Sept 36.3 °C 35 % 31 km/h 0.0 mm High 34
5 Sept 36.4 °C 34 % 31 km/h 0.0 mm High 34
6 Sept 37.9 °C 33 % 35 km/h 0.0 mm High 36
7 Sept 39.4 °C 28 % 49 km/h 0.0 mm Extreme 54
8 Sept 39.5 °C 26 % 46 km/h 0.0 mm Extreme 56
9 Sept 39.5 °C 24 % 52 km/h 0.0 mm Extreme 64
10 Sept 38.5 °C 26 % 44 km/h 0.0 mm Extreme 58
11 Sept 38.3 °C 32 % 37 km/h 0.0 mm Extreme 51
12 Sept 28.8 °C 45 % 44 km/h 0.0 mm Very high 41
13 Sept 33.0 °C 44 % 30 km/h 0.0 mm High 26
14 Sept 37.3 °C 35 % 28 km/h 0.0 mm High 29
15 Sept 39.6 °C 26 % 42 km/h 0.0 mm Extreme 52
16 Sept 40.1 °C 29 % 44 km/h 0.0 mm Extreme 54
17 Sept 35.8 °C 34 % 38 km/h 0.0 mm Very high 40
18 Sept 38.1 °C 35 % 40 km/h 0.0 mm Very high 43
19 Sept 39.0 °C 32 % 59 km/h 0.0 mm Extreme 62
20 Sept 39.1 °C 33 % 56 km/h 0.2 mm Extreme 56
21 Sept 33.9 °C 40 % 31 km/h 0.0 mm High 38
22 Sept 36.3 °C 34 % 30 km/h 0.0 mm High 38
23 Sept 38.1 °C 33 % 30 km/h 0.0 mm Very high 40
24 Sept 38.5 °C 38 % 28 km/h 4.1 mm High 34
25 Sept after 30.3 °C 50 % 40 km/h 20.0 mm Very low 4

Its twins: fires that started in the same weather

It started with an FWI of 31.6, a minimum humidity of 24% and 29 days without rain. Fires in the area that started in weather like this since 2016: 33.

FWI at the start 31.6
Minimum humidity 24 %
Days without rain 29
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

San José fire, August 2024
8,873 ha 20 days FWI 30.8 Min. humidity 25 % 75 km away, in 2024

First rain (1 mm or more) after it ended: 1.8 mm on 15 Sept.

What happened to them

14 days
median duration
5,714 ha
median area
30 %
went past 10,000 ha
3.4 mm
rain at the end (median; 22 of 33 had it)

It was 20.5 times larger than the median of its twins and lasted 52 days, against 14 days.

Only 1 of its 33 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 11 of 33, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.4 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

20.0 mmfirst rain
25 Septthe day after it ended
59km/h · max. gust

It was considered over on 24 Sept, and on 25 Sept 20.0 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 22 of 33, with a median of 3.4 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 28 Jul 2019
After · 1 Oct 2019

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 6,043Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Bolivia

Frequently asked questions

How long did the San Matías fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 4 August 2019 to 24 September 2019 (52 days). The perimeter dates it from 6 August 2019 to 24 September 2019.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 117,205 hectares (1,172.0 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered San Matías (119,075 ha, 4.4 %).
What was the weather like?
During the fire the temperature reached 40.1 °C, humidity dropped to 24 % and gusts hit 59 km/h. The fire danger index (FWI) reached 64, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Bolivia (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 33. Their median duration was 14 days and their median area 5,714 ha; 30 % went past 10,000 ha. Only 1 of its 33 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 11 of 33, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.4 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 119 · 110 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 119 · 110.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 4 polygons grouped in this page.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 6 August 2019 to 24 September 2019. 6,043 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM3 (Public Domain). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.