Skip to content
worldfires
BO · Bolivia · –

San Javier fire, 12 September 2017 San Javier

Out · last detection 25 Sept 2017, 17:21 UTC

The fire started on 12 September 2017 in San Javier, Bolivia, and satellites saw it burning for 14 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 4,359 hectares from heat detections, spread across a single municipality.

It is the 514th largest in Beni since 2016 (of 858 with a page). Number 72 in Bolivia in 2017, of 123.

Burnt area
4,359ha
GWIS perimeter (Copernicus)
Duration
14days
12 Sept 2017 – 25 Sept 2017
Municipalities hit
1
municipalities
Started on
12 Sept
2017
Heat detections
239
in a single hotspot: 44 MW
Danger at start
1
Very low · FWI index
Average daily power
183MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 12 Sept25 Sept
25 Sept 2017

How it evolved, day by day

13 Sept 2017 · 78 MW · 4 14 Sept 2017 · 727 MW · 60 15 Sept 2017 · 13 MW · 4 17 Sept 2017 · 521 MW · 54 18 Sept 2017 · 130 MW · 34 19 Sept 2017 · 99 MW · 10 20 Sept 2017 · 42 MW · 7 21 Sept 2017 · 53 MW · 4 22 Sept 2017 · 56 MW · 9 23 Sept 2017 · 157 MW · 18 24 Sept 2017 · 235 MW · 25 25 Sept 2017 · 85 MW · 10
14 Sept 20 Sept 23 Sept

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

35°high
47km/h · peak gust
39%lowest humidity

It had gone 0 days without rain (1 mm or more) when it started. Rain came after the fire: 4.9 mm on 26 Sept.

This area had burned before

42% of the perimeter overlaps earlier fires recorded since 2016: 1,876 ha in 2016.

How big is it?

10 km
It burned the equivalent of 2.8% of the area of London (44 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. San Javier 7,913 inhabitants where it started
    4,383 ha
    0.5 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2015
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2015, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
12 Sept 30.1 °C 60 % 26 km/h 0.2 mm Very low 1
13 Sept 33.7 °C 54 % 19 km/h 0.0 mm Very low 4
14 Sept 34.2 °C 51 % 34 km/h 0.5 mm Moderate 12
15 Sept 33.8 °C 57 % 30 km/h 9.2 mm Low 8
16 Sept 24.8 °C 50 % 47 km/h 0.0 mm Very low 4
17 Sept 27.9 °C 44 % 43 km/h 0.0 mm Moderate 12
18 Sept 32.5 °C 47 % 26 km/h 0.0 mm Moderate 12
19 Sept 34.7 °C 39 % 18 km/h 0.0 mm Moderate 12
20 Sept 35.0 °C 42 % 24 km/h 0.0 mm Moderate 16
21 Sept 34.7 °C 46 % 26 km/h 0.0 mm Moderate 17
22 Sept 30.1 °C 60 % 28 km/h 1.0 mm Moderate 14
23 Sept 31.8 °C 50 % 29 km/h 0.1 mm Moderate 15
24 Sept 33.9 °C 47 % 25 km/h 0.0 mm Moderate 13
25 Sept 34.4 °C 48 % 19 km/h 2.8 mm Moderate 13
26 Sept after 28.0 °C 58 % 24 km/h 4.9 mm Very low 1

Its twins: fires that started in the same weather

It started with an FWI of 1.3, a minimum humidity of 60% and rain the day before. Fires in the area that started in weather like this since 2016: 22.

FWI at the start 1.3
Minimum humidity 60 %
Days without rain 0
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Magdalena fire, November 2020
3,185 ha 12 days FWI 0.6 Min. humidity 59 % 113 km away, in 2020

First rain (1 mm or more) after it ended: 3.5 mm on 27 Nov.

What happened to them

12 days
median duration
5,502 ha
median area
23 %
went past 10,000 ha
7.2 mm
rain at the end (median; 22 of 22 had it)

It burned an area similar to its twins (4,359 ha against a median of 5,502 ha) and lasted 14 days, against 12 days.

All of them had rain in the ten days after the end: the first rainy day brought a median of 7.2 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

4.9 mmfirst rain
26 Septthe day after it ended
47km/h · max. gust

It was considered over on 25 Sept, and on 26 Sept 4.9 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 22 of 22, with a median of 7.2 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 5 Sept 2017
After · 2 Oct 2017

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 239Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Bolivia

Frequently asked questions

How long did the San Javier fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 12 September 2017 to 25 September 2017 (14 days). The perimeter dates it from 12 September 2017 to 20 September 2017.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 4,359 hectares (43.6 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered San Javier (4,383 ha, 0.5 %).
What was the weather like?
During the fire the temperature reached 35.0 °C, humidity dropped to 39 % and gusts hit 47 km/h. The fire danger index (FWI) reached 17, class Moderate.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Bolivia (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 22. Their median duration was 12 days and their median area 5,502 ha; 23 % went past 10,000 ha. All of them had rain in the ten days after the end: the first rainy day brought a median of 7.2 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 119 · 110 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 20 September 2017 → 25 September 2017.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 119 · 110.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 12 September 2017 to 20 September 2017. 239 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2015, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM3 (Public Domain). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.