Skip to content
worldfires
BO · Bolivia · –

San Andrés fire, 5 September 2022 San Andrés, Ascención de Guarayos

Out · last detection

The fire started on in San Andrés, Bolivia, and satellites saw it burning for 10 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 3,207 hectares from heat detections, spread across 2 municipalities.

It is number 782 by size of the 858 fires with a page that started in Beni since 2016. Number 206 in Bolivia in 2022, of 222.

Burnt area
3,207ha
GWIS perimeter (Copernicus)
Duration
10days
5 Sept 2022 – 14 Sept 2022
Municipalities hit
2
municipalities
Started on
5 Sept
2022
Heat detections
157
in a single hotspot: 0 MW
Danger at start
32
High · FWI index
Average daily power
196MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 5 Sept14 Sept
14 Sept 2022

How it evolved, day by day

5 Sept 2022 · 38 MW · 12 7 Sept 2022 · 567 MW · 8 8 Sept 2022 · 280 MW · 28 9 Sept 2022 · 66 MW · 23 10 Sept 2022 · 88 MW · 26 11 Sept 2022 · 650 MW · 36 12 Sept 2022 · 20 MW · 16 13 Sept 2022 · 8 MW · 3 14 Sept 2022 · 48 MW · 5
5 Sept 8 Sept 11 Sept 14 Sept

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

35°high
54km/h · peak gust
26%lowest humidity

It had gone 17 days without rain (1 mm or more) when it started.

This area had burned before

35% of the perimeter overlaps earlier fires recorded since 2016: 631 ha in 2016, 379 ha in 2017, 272 ha in 2018, 2 ha in 2020. Part of it burned more than once, so the yearly figures add up to more than the 1,123 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 2% of the area of London (32 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. San Andrés 15,570 inhabitants where it started
    2,654 ha
    0.3 %
  2. Ascención de Guarayos 31,577 inhabitants
    577 ha
    0.1 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area0.69 ha
Residents≈ 60

Inside the perimeter there were about 0.69 hectares of built-up land and about 60 residents (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
5 Sept 29.6 °C 26 % 38 km/h 0.0 mm High 32
6 Sept 31.4 °C 30 % 24 km/h 0.0 mm High 25
7 Sept 34.0 °C 32 % 41 km/h 0.0 mm High 31
8 Sept 35.0 °C 38 % 52 km/h 0.0 mm Very high 39
9 Sept 35.0 °C 38 % 40 km/h 0.1 mm High 31
10 Sept 25.4 °C 47 % 41 km/h 4.9 mm Very low 5
11 Sept 32.1 °C 40 % 26 km/h 0.0 mm Low 11
12 Sept 33.0 °C 47 % 29 km/h 0.2 mm Moderate 14
13 Sept 30.4 °C 53 % 31 km/h 0.0 mm Moderate 17
14 Sept 23.0 °C 41 % 54 km/h 0.8 mm High 26
15 Sept after 23.2 °C 43 % 43 km/h 0.9 mm Moderate 21
16 Sept after 31.2 °C 36 % 18 km/h 0.0 mm Moderate 17
17 Sept after 35.0 °C 34 % 32 km/h 0.0 mm High 24
18 Sept after 36.4 °C 37 % 46 km/h 0.0 mm High 33
19 Sept after 36.2 °C 41 % 50 km/h 0.0 mm High 33
20 Sept after 35.1 °C 48 % 37 km/h 0.9 mm Moderate 18
21 Sept after 35.3 °C 43 % 54 km/h 0.0 mm High 34
22 Sept after 27.0 °C 54 % 54 km/h 0.3 mm High 36
23 Sept after 27.9 °C 36 % 40 km/h 0.0 mm High 28
24 Sept after 34.4 °C 32 % 29 km/h 0.0 mm High 27

Its twins: fires that started in the same weather

It started with an FWI of 31.8, a minimum humidity of 26% and 17 days without rain. Fires in the area that started in weather like this since 2016: 42.

FWI at the start 31.8
Minimum humidity 26 %
Days without rain 17
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

San Ignacio fire, September 2024
31,943 ha 29 days FWI 31.3 Min. humidity 29 % 190 km away, in 2024

First rain (1 mm or more) after it ended: 6.9 mm on 9 Oct.

What happened to them

13 days
median duration
5,770 ha
median area
26 %
went past 10,000 ha
8.4 mm
rain at the end (median; 38 of 42 had it)

It stayed below its twins: 3,207 ha against a median of 5,770 ha. It lasted 10 days, against 13 days.

In 4 of 42, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 8.4 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
54km/h · max. gust

It was considered over on 14 Sept, and not even 1 mm fell in the following ten days: it went out without rain. Twins with rain when they ended: 38 of 42, with a median of 8.4 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 29 Aug 2022
After · 21 Sept 2022

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 6 September 2022 the air beside the fire reached 568 µg/m³ of PM2.5. That day averaged 258: 17 times the WHO daily guideline (15).

PM2.5 peak568 µg/m³
Days over the guideline15 days
PM10812 µg/m³
Optical depth3.37
3 Sept6 Sept9 Sept12 Sept15 Sept
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 0Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Bolivia

Frequently asked questions

How long did the San Andrés fire last?
GWIS (Copernicus) dates it between 5 September 2022 and 14 September 2022: 10 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 3,207 hectares (32.1 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: San Andrés (2,654 ha, 0.3 %); Ascención de Guarayos (577 ha, 0.1 %).
What was the weather like?
During the fire the temperature reached 35.0 °C, humidity dropped to 26 % and gusts hit 54 km/h. The fire danger index (FWI) reached 39, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Bolivia (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 42. Their median duration was 13 days and their median area 5,770 ha; 26 % went past 10,000 ha. In 4 of 42, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 8.4 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 119 · 110 · Emergency number and official warnings

Satellite cross-check

History of this page · 4 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 21 September 2022 → 14 September 2022.
  2. Start date: 31 August 2022 → 5 September 2022.
  3. Last day with fire: 14 September 2022 → 21 September 2022.
  4. Start date: 5 September 2022 → 31 August 2022.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 119 · 110.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. No Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM3 (Public Domain). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.