Loreto fire, 19 August 2024 Loreto, San Andrés
The fire started on 19 August 2024 in Loreto, Bolivia, and satellites saw it burning for 8 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 3,757 hectares from heat detections, spread across 2 municipalities.
It is the 661th largest in Beni since 2016 (of 902 with a page). Number 225 in Bolivia in 2024, of 295.
Compare with…
Suggestions: Loreto · 2023Loreto · 2025Loreto · 2019Loreto · 2024
- Burnt area
- 3,757ha
- GWIS perimeter (Copernicus)
- Duration
- 8days
- 19 Aug 2024 – 26 Aug 2024
- Municipalities hit
- 2
- municipalities
- Started on
- 19 Aug
- 2024
- Heat detections
- 117
- in a single hotspot: 30 MW
- Danger at start
- 27
- High · FWI index
- Average daily power
- 111MW
- detected power per day, on average
Where it burned
How it evolved, day by day
Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.
The weather it burned in
It had gone 10 days without rain (1 mm or more) when it started.
This area had burned before
54% of the perimeter overlaps earlier fires recorded since 2016: 759 ha in 2016, 873 ha in 2017, 649 ha in 2018, 814 ha in 2019, 3 ha in 2022. Part of it burned more than once, so the yearly figures add up to more than the 2,013 ha that had burned before.
How big is it?
London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).
Paris boundary: geoBoundaries · Institut national de l'information géographique et forestière (IGN-F) (Etalab Open License 2.0).
Madrid boundary: geoBoundaries · Open Data ESRI, IGN Central Registry of Cartography Area (CC BY 4.0).
Berlin boundary: geoBoundaries · Federal Agency for Cartography and Geodesy (dl-de/by-2-0).
This compares size, not location: both shapes are at the same scale, north up, centred on each other.
What happened to each town
-
3,713 ha0.5 %
-
San Andrés 15,570 inhabitants59 ha0.0 %
Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.
The weather day by day
ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.
Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
| Day | High | Min. humidity | Peak gust | Rain | Danger (FWI) |
|---|---|---|---|---|---|
| 19 Aug | 36.2 °C | 40 % | 37 km/h | 0.0 mm | High 27 |
| 20 Aug | 36.3 °C | 41 % | 27 km/h | 0.0 mm | High 25 |
| 21 Aug | 36.2 °C | 41 % | 48 km/h | 0.0 mm | High 32 |
| 22 Aug | 36.3 °C | 36 % | 46 km/h | 0.0 mm | High 33 |
| 23 Aug | 31.8 °C | 50 % | 34 km/h | 0.1 mm | High 22 |
| 24 Aug | 25.7 °C | 49 % | 47 km/h | 1.2 mm | Moderate 17 |
| 25 Aug | 22.3 °C | 22 % | 53 km/h | 0.4 mm | High 33 |
| 26 Aug | 25.7 °C | 19 % | 35 km/h | 0.0 mm | High 32 |
| 27 Aug after | 29.7 °C | 31 % | 16 km/h | 0.0 mm | High 29 |
| 28 Aug after | 32.8 °C | 31 % | 18 km/h | 0.0 mm | High 30 |
| 29 Aug after | 37.2 °C | 29 % | 28 km/h | 0.0 mm | High 31 |
| 30 Aug after | 35.8 °C | 34 % | 27 km/h | 0.0 mm | High 31 |
| 31 Aug after | 34.6 °C | 39 % | 24 km/h | 0.0 mm | High 31 |
| 1 Sept after | 30.0 °C | 31 % | 44 km/h | 0.0 mm | High 38 |
| 2 Sept after | 33.7 °C | 32 % | 23 km/h | 0.0 mm | High 32 |
| 3 Sept after | 36.4 °C | 31 % | 39 km/h | 0.0 mm | High 35 |
| 4 Sept after | 36.2 °C | 38 % | 39 km/h | 0.0 mm | High 34 |
| 5 Sept after | 30.6 °C | 31 % | 53 km/h | 0.0 mm | Very high 45 |
Before and after, from space
Drag the line to compare the same ground before the fire and after it.
If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.
The smoke
CAMS · CopernicusOn 28 August 2024 the air beside the fire reached 181 µg/m³ of PM2.5. That day averaged 135: 9.0 times the WHO daily guideline (15).
Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.
Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)
Detections table · 117Every satellite heat detection, one by one, with time, satellite, power and coordinates.
| Date and time | Satellite | FRP (MW) | Lat | Lon |
|---|
Other fires nearby
Frequently asked questions
- How long did the Loreto fire last?
- GWIS (Copernicus) dates it between 19 August 2024 and 26 August 2024: 8 days between the first and last heat detection of the perimeter.
- How much area did it burn?
- The perimeter GWIS (Copernicus) rebuilt from heat detections is 3,757 hectares (37.6 km²). It is an estimate: official national figures may differ.
- Which municipalities burned?
- The fire entered 2 municipalities: Loreto (3,713 ha, 0.5 %); San Andrés (59 ha, 0.0 %).
- What was the weather like?
- During the fire the temperature reached 36.3 °C, humidity dropped to 19 % and gusts hit 53 km/h. The fire danger index (FWI) reached 33, class High.
- Where does this data come from?
- From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Bolivia (geoBoundaries). It is not an official report.
Where to verify it
A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.
Emergency number: 119 · 110 · Emergency number and official warnings ›
Satellite cross-check
History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
No changes since 24 October 2026.
Does something look wrong on this page?
This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.
Report an error
How we know this
- Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
- Dates from the perimeter: the VIIRS detections inside it did not change them. 117 Suomi-NPP VIIRS detections on those dates.
- We have not matched this page with any official record.
- Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
Where this data comes from
The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM3 (Public Domain). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.