Skip to content
worldfires
ZA · South Africa · –

Sakhisizwe fire, 8 September 2020 Sakhisizwe, Senqu, Elundini

Out · last detection

The fire started on in Sakhisizwe, South Africa, and satellites saw it burning for 8 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 12,609 hectares from heat detections, spread across 3 municipalities.

It is number 6 by size of the 152 fires with a page that started in Eastern Cape since 2016. Number 2 in South Africa in 2020, of 95.

Compare with…
Burnt area
12,609ha
GWIS perimeter (Copernicus)
Duration
8days
8 Sept 2020 – 15 Sept 2020
Municipalities hit
3
municipalities
Started on
8 Sept
2020
Heat detections
347
in a single hotspot: 120 MW
Danger at start
8
Low · FWI index
Average daily power
500MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 8 Sept15 Sept
15 Sept 2020

How it evolved, day by day

8 Sept 2020 · 1,110 MW · 152 9 Sept 2020 · 1,329 MW · 81 10 Sept 2020 · 1,093 MW · 54 11 Sept 2020 · 47 MW · 18 12 Sept 2020 · 245 MW · 23 13 Sept 2020 · 46 MW · 10 14 Sept 2020 · 115 MW · 7 15 Sept 2020 · 11 MW · 2
9 Sept 12 Sept 14 Sept

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

26°high
78km/h · peak gust
9%lowest humidity

It had gone one day without rain (1 mm or more) when it started. Rain came after the fire: 1.6 mm on 21 Sept.

This area had burned before

32% of the perimeter overlaps earlier fires recorded since 2016: 4,002 ha in 2017, 179 ha in 2019.

How big is it?

10 km
It burned the equivalent of 8% of the area of London (126 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Sakhisizwe where it started
    8,586 ha reached on 8 Sept
    3.7 %
  2. 2,078 ha reached on 8 Sept
    0.3 %
  3. 1,980 ha reached on 8 Sept
    0.4 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area1.4 ha
Residents≈ 60

Inside the perimeter there were about 1.4 hectares of built-up land and about 60 residents (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
8 Sept 22.7 °C 22 % 24 km/h 0.0 mm Low 8
9 Sept 24.1 °C 21 % 33 km/h 0.0 mm High 24
10 Sept 18.4 °C 44 % 33 km/h 0.0 mm Moderate 18
11 Sept 20.9 °C 37 % 34 km/h 0.0 mm Moderate 14
12 Sept 25.9 °C 16 % 58 km/h 0.0 mm Extreme 52
13 Sept 22.6 °C 16 % 78 km/h 0.0 mm Extreme 65
14 Sept 20.9 °C 9 % 52 km/h 0.6 mm Very high 42
15 Sept 13.7 °C 33 % 38 km/h 0.8 mm Low 8
16 Sept after 19.3 °C 8 % 51 km/h 0.1 mm Very high 45
17 Sept after 18.8 °C 24 % 34 km/h 0.1 mm High 24
18 Sept after 24.1 °C 9 % 52 km/h 0.0 mm Extreme 54
19 Sept after 20.4 °C 24 % 38 km/h 0.0 mm High 28
20 Sept after 25.4 °C 6 % 65 km/h 0.1 mm Very extreme 71
21 Sept after 11.0 °C 33 % 40 km/h 1.6 mm Low 8

Its twins: fires that started in the same weather

It started with an FWI of 8.1, a minimum humidity of 22% and 1 day without rain. Fires in the area that started in weather like this since 2016: 16.

FWI at the start 8.1
Minimum humidity 22 %
Days without rain 1
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Senqu fire, September 2016
2,519 ha 2 days FWI 5.5 Min. humidity 22 % 20 km away, in 2016

First rain (1 mm or more) after it ended: 11.0 mm on 17 Sept.

What happened to them

4 days
median duration
3,088 ha
median area
100 %
went past 1,000 ha
2.2 mm
rain at the end (median; 14 of 16 had it)

It was 4.1 times larger than the median of its twins and lasted 8 days, against 4 days.

None of its 16 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 2 of 16, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.2 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

1.6 mmfirst rain
21 Sept6 days after it ended
78km/h · max. gust

It was considered over on 15 Sept, and on 21 Sept 1.6 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 14 of 16, with a median of 2.2 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 1 Sept 2020
After · 22 Sept 2020

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 347Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in South Africa

Frequently asked questions

How long did the Sakhisizwe fire last?
GWIS (Copernicus) dates it between 8 September 2020 and 15 September 2020: 8 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 12,609 hectares (126.1 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 3 municipalities: Sakhisizwe (8,586 ha, 3.7 %); Senqu (2,078 ha, 0.3 %); Elundini (1,980 ha, 0.4 %).
What was the weather like?
During the fire the temperature reached 25.9 °C, humidity dropped to 9 % and gusts hit 78 km/h. The fire danger index (FWI) reached 65, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of South Africa (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 16. Their median duration was 4 days and their median area 3,088 ha; 100 % went past 1,000 ha. None of its 16 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 2 of 16, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.2 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 10177 · 112 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 10177 · 112.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 347 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM3 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.