Saint-Pons-de-Mauchiens fire, August 2017
Villeveyrac, Saint-Pons-de-Mauchiens, Saint-Pargoire
Out · last measured on 10 Aug 2017
The fire started on 10 August 2017 in Saint-Pons-de-Mauchiens, France, and satellites saw it burning for 1 day. Copernicus mapped a burnt perimeter of 209 hectares from satellite imagery, spread across 3 municipalities.
It is the 8th largest in Hérault since 2016 (of 14 with a page). Number 15 in France in 2017, of 27.
matches the official recordwith caveatssatellite onlymodel
When copying, the sentence is
Tick the figures you want: they make up the lede and the CSV.
Burned area
matches the official record
209ha
Perimeter published by EFFIS (Copernicus).
This page209BDIFF197
Source
EFFIS (Copernicus)
Date
perimeter revised on 26 January 2022
+− cross-check
BDIFF: 197 ha (matched records: 1). Difference between the page and the official record: +6.4%. Matched on 15 November 2026.
Duration by satellite
satellite only
1day
10 Aug 2017 to 10 Aug 2017: first and last day with fire on the page.
Source
EFFIS (Copernicus) · NASA FIRMS · VIIRS
Date
10 Aug 2017 – 10 Aug 2017
+− cross-check
Satellites pass a few times a day and cloud or smoke can hide the fire: a lack of detections is not an official extinction. Each country’s emergency service declares a fire contained or out.
Start and cause
matches the official record
9 Aug 201711:32
Alert according to BDIFF: 9 August 2017 at 11:32. Official cause: negligence.
Source
BDIFF · 2017-12489
Date
matched to the page on 15 November 2026
+− cross-check
First day with fire on the page (satellite or perimeter): 10 August 2017.
Danger at the start
model
36.5FWI · high
Fire Weather Index (Canadian system) computed by WorldFires for the day the fire started. Consecutive days without rain before: 1.
This is an index computed from weather model data, not a measurement of the fire nor an official warning. Danger warnings are issued by each country’s authority. Emergency number and official warnings ›
Weather during the fire
model
22.4°C · 47% RH
High of 22.4 °C and minimum humidity of 47% on 10 August 2017; gusts of 53 km/h on 10 August 2017.
These are model values for a cell of about 25 km, not from a weather station: they may differ from what was measured on the ground.
Living inside
model
≈ 20people
Estimated residents inside the perimeter and 0.64 ha of built-up area (100 m grid, epoch 2015).
Source
GHSL R2023A · JRC
Date
calculated on 24 October 2026
+− cross-check
This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.
ⓘThis page’s change log has been kept since 24 October 2026: every night what it publishes is compared and the difference is logged. Anything earlier is reconstructed from each source’s date and marked as reconstructed.
Show
· reconstructedofficial
Matched with the official BDIFF record
Matches: 197 ha in the official record (records: 1).
A version keeps the area, dates, name and official record; the area as it was logged (changes under 2% are not logged). The map, hotspots and weather always show today’s data.
Citation
A lede of about 60 words figures only, no adjectives
We have the Copernicus perimeter for this fire, but the VIIRS sensors did not capture it in enough detail: no day-by-day evolution, but the split by municipality is there.
Burnt area
209ha
Copernicus perimeter
Duration
1day
10 Aug 2017 – 10 Aug 2017
Municipalities hit
3
communes
Started on
10 Aug
2017
Danger at start
36
High · FWI index
Natura 2000
100%
of the perimeter is protected land
Where it burned
The weather it burned in
22°high
53km/h · peak gust
47%lowest humidity
It had gone one day without rain (1 mm or more) when it started.
This area had burned before
No earlier perimeters overlap this fire since 2016, when the satellite record begins.
What happened to each town
Villeveyrac3,972 inhabitants · 3.6 km from the centre
Saint-Pargoire2,501 inhabitants · 2.4 km from the centre
39 ha
1.6 %
Burnt area inside each municipality, from crossing the official perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.
Natura 2000 sites (European Environment Agency, 2024 release) crossed by the perimeter.
Land cover inside the perimeter according to Corine Land Cover, as reported by Copernicus.
People and buildings inside the perimeter
GHSL 2015
Built-up area0.64ha
Residents≈ 20
Inside the perimeter there were about 0.64 hectares of built-up land and about 20 residents (GHSL 2015, satellite-based estimate).
This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.
According to BDIFF, a fire of 197 ha was recorded in Saint-Pons-de-Mauchiens on 9 August 2017 (the satellite measured 209 ha). The record has no coordinates, so it was matched by municipality and date.
Saint-Pons-de-Mauchiens9 August 2017 · 11:32197 ha· cause: negligence
ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.
Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
Fires in the area that started in similar weather: 12. With fewer than 15 we give no figures: they would be more noise than signal.
This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it
How it ended
—first rain
—no rain in ten days
53km/h · max. gust
It was considered over on 10 Aug, and not even 1 mm fell in the following ten days: it went out without rain.
Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
How a twin is chosen
Same area: fires that have already ended, less than 250 km from this one, since 2016.
Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
They are sorted by similarity, and the outlines of the first five are drawn.
How long did the Saint-Pons-de-Mauchiens fire last?
Copernicus dates it between 10 August 2017 and 10 August 2017: 1 day between the first and last image with fire.
How much area did it burn?
The perimeter Copernicus measured from satellite imagery is 209 hectares (2.1 km²). Official national figures may differ.
Which municipalities burned?
The fire entered 3 municipalities: Villeveyrac (86 ha, 2.3 %); Saint-Pons-de-Mauchiens (84 ha, 6.1 %); Saint-Pargoire (39 ha, 1.6 %).
Did the fire reach a town?
The fire started in Saint-Pons-de-Mauchiens and came within 2.1 km of its centre. That is the distance from the perimeter, or the nearest hotspot, to the point marking the centre; it does not mean it entered the houses.
What was the weather like?
During the fire the temperature reached 22.4 °C, humidity dropped to 47 % and gusts hit 53 km/h. The fire danger index (FWI) reached 36, class High.
Where does this data come from?
From the EFFIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of France (geoBoundaries). It is not an official report.
Where to verify it
A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.
This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.
⚑Report an errorHow we know this›
Perimeter: EFFIS (Copernicus), mapped on satellite imagery.
Dates from the perimeter: the VIIRS detections inside it did not change them. No Suomi-NPP VIIRS detections on those dates.
Compared with BDIFF: 197 official ha against 209 ha of perimeter; they agree within 25%.
Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2015, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
The perimeter and land cover come from the Copernicus European Forest Fire Information System (EFFIS), measured on MODIS and Sentinel-2 imagery and published under CC BY 4.0. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM5 (Open Data Commons Attribution License 1.0). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ slightly from each country’s official figure.