Skip to content
worldfires
AU · Australia · –

Roper Gulf fire, 14 May 2025 Roper Gulf

Out · last detection 23 May 2025, 04:46 UTC

The fire started on 14 May 2025 in Roper Gulf, Australia, and satellites saw it burning for 12 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 6,046 hectares from heat detections, spread across a single municipality.

This entry is probably a savanna fire in Australia’s tropical north, not a bushfire like those in the south of the country. Millions of hectares of northern savanna and grassland burn every year: much of it in burns lit on purpose early in the dry season (traditional fire management, parks and cattle stations), the rest in grass fires that return to the same ground every few years. This is our assumption, based on the location; it is not confirmed. That is why it is left out of the wildfire rankings.

Burnt area
6,046ha
GWIS perimeter (Copernicus)
Duration
12days
14 May 2025 – 25 May 2025
Municipalities hit
1
local government areas
Started on
14 May
2025
Heat detections
210
in a single hotspot: 33 MW
Danger at start
24
High · FWI index
Average daily power
152MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 14 May25 May
23 May 2025

How it evolved, day by day

14 May 2025 · 104 MW · 21 15 May 2025 · 233 MW · 30 16 May 2025 · 432 MW · 40 17 May 2025 · 149 MW · 27 18 May 2025 · 319 MW · 50 19 May 2025 · 89 MW · 31 20 May 2025 · 27 MW · 6 21 May 2025 · 14 MW · 4 23 May 2025 · 3 MW · 1
14 May 16 May 18 May 20 May 23 May

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

34°high
50km/h · peak gust
27%lowest humidity

It had gone 16 days without rain (1 mm or more) when it started.

This area had burned before

88% of the perimeter overlaps earlier fires recorded since 2016: 844 ha in 2017, 1,808 ha in 2018, 1,445 ha in 2019, 1,811 ha in 2020, 343 ha in 2021, 176 ha in 2022, 785 ha in 2023, 109 ha in 2024. Part of it burned more than once, so the yearly figures add up to more than the 5,329 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 3.8% of the area of London (60 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Roper Gulf where it started
    6,117 ha reached on 14 May
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
14 May 32.2 °C 29 % 40 km/h 0.0 mm High 24
15 May 30.5 °C 34 % 41 km/h 0.0 mm High 25
16 May 30.0 °C 33 % 41 km/h 0.0 mm High 26
17 May 28.0 °C 27 % 46 km/h 0.0 mm High 28
18 May 26.9 °C 28 % 50 km/h 0.0 mm High 30
19 May 27.3 °C 35 % 49 km/h 0.0 mm High 30
20 May 27.6 °C 35 % 43 km/h 0.0 mm High 28
21 May 28.3 °C 27 % 40 km/h 0.0 mm High 27
22 May 28.3 °C 33 % 41 km/h 0.0 mm High 28
23 May 29.5 °C 30 % 41 km/h 0.0 mm High 28
24 May 32.1 °C 40 % 31 km/h 0.0 mm High 24
25 May 34.0 °C 43 % 36 km/h 0.0 mm High 26
26 May after 32.9 °C 50 % 37 km/h 0.0 mm High 24
27 May after 31.8 °C 53 % 42 km/h 0.0 mm High 24
28 May after 28.7 °C 39 % 35 km/h 0.0 mm High 22
29 May after 26.9 °C 45 % 38 km/h 0.0 mm High 25
30 May after 26.8 °C 38 % 43 km/h 0.0 mm High 26
31 May after 27.5 °C 33 % 40 km/h 0.0 mm High 27
1 Jun after 30.6 °C 37 % 27 km/h 0.0 mm High 23
2 Jun after 30.8 °C 29 % 29 km/h 0.0 mm High 27
3 Jun after 30.2 °C 28 % 36 km/h 0.0 mm High 30
4 Jun after 28.7 °C 28 % 40 km/h 0.0 mm High 33

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 7 May 2025
After · 1 Jun 2025

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 15 May 2025 the air beside the fire reached 51 µg/m³ of PM2.5. That day averaged 25: 1.6 times the WHO daily guideline (15).

PM2.5 peak51 µg/m³
Days over the guideline4 days
PM1051 µg/m³
Optical depth0.54
12 May15 May18 May21 May
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 210Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the Roper Gulf fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 14 May 2025 to 25 May 2025 (12 days). The perimeter dates it from 14 May 2025 to 20 May 2025.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 6,046 hectares (60.5 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Roper Gulf (6,117 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 34.0 °C, humidity dropped to 27 % and gusts hit 50 km/h. The fire danger index (FWI) reached 30, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 20 May 2025 → 25 May 2025.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 14 May 2025 to 20 May 2025. 210 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
  • Probably a vegetation burn: not counted in the totals.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.