Skip to content
worldfires
AU · Australia · –

Roper Gulf fire, 20 May 2023 Roper Gulf

Out · last detection 9 Jun 2023, 04:33 UTC

The fire started on 20 May 2023 in Roper Gulf, Australia, and satellites saw it burning for 21 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 24,701 hectares from heat detections, spread across a single municipality.

This entry is probably a savanna fire in Australia’s tropical north, not a bushfire like those in the south of the country. Millions of hectares of northern savanna and grassland burn every year: much of it in burns lit on purpose early in the dry season (traditional fire management, parks and cattle stations), the rest in grass fires that return to the same ground every few years. This is our assumption, based on the location; it is not confirmed. That is why it is left out of the wildfire rankings.

Burnt area
24,701ha
GWIS perimeter (Copernicus)
Duration
21days
20 May 2023 – 9 Jun 2023
Municipalities hit
1
local government areas
Started on
20 May
2023
Heat detections
1,037
in a single hotspot: 175 MW
Danger at start
38
Very high · FWI index
Average daily power
336MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 20 May9 Jun
9 Jun 2023

How it evolved, day by day

20 May 2023 · 1,494 MW · 190 21 May 2023 · 676 MW · 146 22 May 2023 · 1,193 MW · 176 23 May 2023 · 423 MW · 89 24 May 2023 · 412 MW · 76 25 May 2023 · 37 MW · 10 26 May 2023 · 120 MW · 39 27 May 2023 · 298 MW · 51 28 May 2023 · 52 MW · 23 29 May 2023 · 159 MW · 51 30 May 2023 · 266 MW · 58 31 May 2023 · 565 MW · 29 1 Jun 2023 · 141 MW · 18 2 Jun 2023 · 218 MW · 42 3 Jun 2023 · 217 MW · 22 4 Jun 2023 · 55 MW · 8 6 Jun 2023 · 6 MW · 1 8 Jun 2023 · 4 MW · 1 9 Jun 2023 · 52 MW · 7
20 May 24 May 28 May 1 Jun 6 Jun

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

34°high
49km/h · peak gust
20%lowest humidity

It had gone 30 days without rain (1 mm or more) when it started.

This area had burned before

68% of the perimeter overlaps earlier fires recorded since 2016: 341 ha in 2017, 10,104 ha in 2018, 328 ha in 2019, 8,723 ha in 2020, 724 ha in 2021, 484 ha in 2022. Part of it burned more than once, so the yearly figures add up to more than the 16,681 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 16% of the area of London (247 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Roper Gulf where it started
    24,977 ha reached on 20 May
    0.1 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
20 May 27.0 °C 20 % 40 km/h 0.0 mm Very high 38
21 May 26.8 °C 23 % 46 km/h 0.0 mm Very high 42
22 May 28.1 °C 25 % 49 km/h 0.0 mm Very high 44
23 May 28.0 °C 25 % 45 km/h 0.0 mm Very high 41
24 May 29.4 °C 24 % 42 km/h 0.0 mm Very high 39
25 May 30.4 °C 33 % 39 km/h 0.0 mm High 37
26 May 30.9 °C 24 % 42 km/h 0.0 mm Very high 41
27 May 26.9 °C 23 % 44 km/h 0.0 mm Very high 41
28 May 25.9 °C 21 % 41 km/h 0.0 mm Very high 40
29 May 26.9 °C 23 % 44 km/h 0.0 mm Very high 42
30 May 27.7 °C 22 % 42 km/h 0.0 mm Very high 41
31 May 29.2 °C 22 % 36 km/h 0.0 mm High 37
1 Jun 30.2 °C 28 % 37 km/h 0.0 mm High 38
2 Jun 31.6 °C 32 % 35 km/h 0.0 mm Very high 39
3 Jun 31.5 °C 29 % 29 km/h 0.0 mm High 36
4 Jun 32.5 °C 33 % 30 km/h 0.0 mm High 36
5 Jun 32.1 °C 38 % 34 km/h 0.0 mm High 34
6 Jun 33.7 °C 34 % 38 km/h 0.0 mm High 37
7 Jun 33.1 °C 38 % 35 km/h 0.0 mm High 36
8 Jun 33.5 °C 34 % 34 km/h 0.0 mm High 35
9 Jun 31.7 °C 34 % 42 km/h 0.0 mm Very high 40
10 Jun after 30.3 °C 28 % 38 km/h 0.0 mm High 38
11 Jun after 30.7 °C 27 % 32 km/h 0.0 mm High 34
12 Jun after 31.8 °C 30 % 29 km/h 0.0 mm High 34
13 Jun after 32.0 °C 24 % 32 km/h 0.0 mm High 37
14 Jun after 30.3 °C 23 % 42 km/h 0.0 mm Very high 44
15 Jun after 29.5 °C 23 % 35 km/h 0.0 mm Very high 38
16 Jun after 28.3 °C 17 % 33 km/h 0.0 mm Very high 41
17 Jun after 29.5 °C 22 % 29 km/h 0.0 mm Very high 39
18 Jun after 30.5 °C 21 % 30 km/h 0.0 mm Very high 40
19 Jun after 29.5 °C 14 % 35 km/h 0.0 mm Very high 45

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 13 May 2023
After · 16 Jun 2023

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 22 May 2023 the air beside the fire reached 36 µg/m³ of PM2.5. That day averaged 20: 1.3 times the WHO daily guideline (15).

PM2.5 peak36 µg/m³
Days over the guideline3 days
PM1055 µg/m³
Optical depth0.49
18 May23 May28 May2 Jun7 Jun
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 1,037Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the Roper Gulf fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 20 May 2023 to 9 June 2023 (21 days). The perimeter dates it from 20 May 2023 to 4 June 2023.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 24,701 hectares (247.0 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Roper Gulf (24,977 ha, 0.1 %).
What was the weather like?
During the fire the temperature reached 33.7 °C, humidity dropped to 20 % and gusts hit 49 km/h. The fire danger index (FWI) reached 44, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 4 June 2023 → 9 June 2023.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 20 May 2023 to 4 June 2023. 1,037 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
  • Probably a vegetation burn: not counted in the totals.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.