Skip to content
worldfires
AU · Australia · –

Roper Gulf fire, 14 May 2025 Roper Gulf

Out · last detection 19 May 2025, 15:30 UTC

The fire started on 14 May 2025 in Roper Gulf, Australia, and satellites saw it burning for 6 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 12,031 hectares from heat detections, spread across a single municipality.

This entry is probably a savanna fire in Australia’s tropical north, not a bushfire like those in the south of the country. Millions of hectares of northern savanna and grassland burn every year: much of it in burns lit on purpose early in the dry season (traditional fire management, parks and cattle stations), the rest in grass fires that return to the same ground every few years. This is our assumption, based on the location; it is not confirmed. That is why it is left out of the wildfire rankings.

Burnt area
12,031ha
GWIS perimeter (Copernicus)
Duration
6days
14 May 2025 – 19 May 2025
Municipalities hit
1
local government areas
Started on
14 May
2025
Heat detections
370
in a single hotspot: 311 MW
Danger at start
35
High · FWI index
Average daily power
477MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 14 May19 May
19 May 2025

How it evolved, day by day

14 May 2025 · 822 MW · 34 15 May 2025 · 706 MW · 78 16 May 2025 · 631 MW · 95 17 May 2025 · 388 MW · 79 18 May 2025 · 226 MW · 58 19 May 2025 · 87 MW · 26
14 May 16 May 18 May

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

32°high
52km/h · peak gust
26%lowest humidity

It had gone 25 days without rain (1 mm or more) when it started.

This area had burned before

81% of the perimeter overlaps earlier fires recorded since 2016: 698 ha in 2017, 2,253 ha in 2018, 2,385 ha in 2019, 2,552 ha in 2020, 1,882 ha in 2021, 6,780 ha in 2022, 1,037 ha in 2024. Part of it burned more than once, so the yearly figures add up to more than the 9,767 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 7.6% of the area of London (120 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Roper Gulf where it started
    12,180 ha reached on 14 May
    0.1 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
14 May 32.1 °C 27 % 41 km/h 0.0 mm High 35
15 May 30.2 °C 33 % 42 km/h 0.0 mm High 36
16 May 29.7 °C 32 % 42 km/h 0.0 mm High 37
17 May 27.7 °C 26 % 47 km/h 0.0 mm Very high 40
18 May 26.8 °C 27 % 52 km/h 0.0 mm Very high 43
19 May 27.1 °C 34 % 51 km/h 0.0 mm Very high 41
20 May after 27.3 °C 34 % 45 km/h 0.0 mm High 38
21 May after 28.0 °C 26 % 42 km/h 0.0 mm High 36
22 May after 28.1 °C 33 % 44 km/h 0.0 mm High 38
23 May after 29.5 °C 29 % 42 km/h 0.0 mm High 37
24 May after 32.3 °C 38 % 31 km/h 0.0 mm High 32
25 May after 34.2 °C 41 % 35 km/h 0.0 mm High 34
26 May after 33.1 °C 47 % 36 km/h 0.0 mm High 31
27 May after 32.2 °C 50 % 41 km/h 0.0 mm High 31
28 May after 28.3 °C 38 % 36 km/h 0.0 mm High 30
29 May after 26.0 °C 45 % 41 km/h 0.0 mm High 31
30 May after 26.3 °C 36 % 45 km/h 0.0 mm High 33
31 May after 27.3 °C 32 % 42 km/h 0.0 mm High 35

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 7 May 2025
After · 26 May 2025

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 15 May 2025 the air beside the fire reached 44 µg/m³ of PM2.5. That day averaged 22: 1.5 times the WHO daily guideline (15).

PM2.5 peak44 µg/m³
Days over the guideline2 days
PM1044 µg/m³
Optical depth0.45
12 May15 May18 May21 May
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 370Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the Roper Gulf fire last?
GWIS (Copernicus) dates it between 14 May 2025 and 19 May 2025: 6 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 12,031 hectares (120.3 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Roper Gulf (12,180 ha, 0.1 %).
What was the weather like?
During the fire the temperature reached 32.1 °C, humidity dropped to 26 % and gusts hit 52 km/h. The fire danger index (FWI) reached 43, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 370 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
  • Probably a vegetation burn: not counted in the totals.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.