Skip to content
worldfires
AU · Australia · –

Roper Gulf fire, 15 October 2024 Roper Gulf, Burke

Out · last detection 2 Nov 2024, 04:31 UTC

The fire started on 15 October 2024 in Roper Gulf, Australia, and satellites saw it burning for 19 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 65,211 hectares from heat detections, spread across 2 municipalities.

This entry is probably a savanna fire in Australia’s tropical north, not a bushfire like those in the south of the country. Millions of hectares of northern savanna and grassland burn every year: much of it in burns lit on purpose early in the dry season (traditional fire management, parks and cattle stations), the rest in grass fires that return to the same ground every few years. This is our assumption, based on the location; it is not confirmed. That is why it is left out of the wildfire rankings.

Burnt area
65,211ha
GWIS perimeter (Copernicus)
Duration
19days
15 Oct 2024 – 2 Nov 2024
Municipalities hit
2
local government areas
Started on
15 Oct
2024
Heat detections
2,233
in a single hotspot: 229 MW
Danger at start
50
Extreme · FWI index
Average daily power
1.8GW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 15 Oct2 Nov
2 Nov 2024

How it evolved, day by day

15 Oct 2024 · 132 MW · 8 16 Oct 2024 · 944 MW · 83 17 Oct 2024 · 782 MW · 80 18 Oct 2024 · 530 MW · 87 19 Oct 2024 · 333 MW · 42 20 Oct 2024 · 10,130 MW · 479 21 Oct 2024 · 4,255 MW · 265 22 Oct 2024 · 1,498 MW · 147 23 Oct 2024 · 587 MW · 90 24 Oct 2024 · 778 MW · 106 25 Oct 2024 · 4,513 MW · 334 26 Oct 2024 · 4,515 MW · 302 27 Oct 2024 · 872 MW · 84 28 Oct 2024 · 522 MW · 81 29 Oct 2024 · 514 MW · 35 30 Oct 2024 · 37 MW · 8 2 Nov 2024 · 12 MW · 2
15 Oct 20 Oct 23 Oct 27 Oct 2 Nov

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

40°high
49km/h · peak gust
8%lowest humidity

It had gone one day without rain (1 mm or more) when it started. Rain came after the fire: 1.1 mm on 12 Nov.

This area had burned before

82% of the perimeter overlaps earlier fires recorded since 2016: 3,507 ha in 2017, 9,208 ha in 2018, 8,945 ha in 2019, 21,409 ha in 2020, 10,166 ha in 2021, 31,517 ha in 2022, 763 ha in 2023. Part of it burned more than once, so the yearly figures add up to more than the 53,581 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 41% of the area of London (652 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Roper Gulf where it started
    66,081 ha reached on 15 Oct
    0.4 %
  2. 145 ha reached on 23 Oct
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Extreme FWI: 43 % of the area in Australia

Day High Min. humidity Peak gust Rain Danger (FWI)
15 Oct 36.3 °C 23 % 42 km/h 0.0 mm Extreme 50
16 Oct 35.6 °C 30 % 45 km/h 0.2 mm Extreme 52
17 Oct 35.0 °C 39 % 42 km/h 1.1 mm Very high 49
18 Oct 36.1 °C 32 % 38 km/h 0.4 mm Very high 41
19 Oct 35.3 °C 31 % 37 km/h 0.0 mm Very high 41
20 Oct 39.1 °C 20 % 40 km/h 0.0 mm Extreme 58
21 Oct 40.2 °C 9 % 39 km/h 0.0 mm Extreme 66
22 Oct 37.9 °C 25 % 43 km/h 0.1 mm Extreme 57
23 Oct 37.8 °C 29 % 46 km/h 0.0 mm Extreme 51
24 Oct 38.8 °C 22 % 46 km/h 0.0 mm Very high 42
25 Oct 38.2 °C 18 % 49 km/h 0.0 mm Very extreme 76
26 Oct 39.2 °C 8 % 38 km/h 0.0 mm Extreme 64
27 Oct 34.7 °C 42 % 41 km/h 0.5 mm Very high 44
28 Oct 36.7 °C 29 % 37 km/h 0.1 mm Very high 47
29 Oct 38.0 °C 32 % 31 km/h 0.0 mm Very high 44
30 Oct 34.2 °C 47 % 39 km/h 5.5 mm Moderate 15
31 Oct 33.8 °C 39 % 38 km/h 12.1 mm Low 6
1 Nov 32.6 °C 45 % 39 km/h 1.4 mm Very low 4
2 Nov 35.3 °C 33 % 33 km/h 0.0 mm High 22
3 Nov after 35.3 °C 39 % 31 km/h 0.5 mm High 27
4 Nov after 35.0 °C 36 % 35 km/h 0.0 mm High 31
5 Nov after 37.1 °C 27 % 34 km/h 0.0 mm High 34
6 Nov after 37.9 °C 25 % 38 km/h 0.0 mm Very high 43
7 Nov after 37.3 °C 27 % 35 km/h 0.0 mm Very high 45
8 Nov after 38.2 °C 27 % 35 km/h 0.1 mm Very high 38
9 Nov after 36.7 °C 35 % 37 km/h 0.0 mm Very high 48
10 Nov after 36.9 °C 32 % 33 km/h 0.0 mm Very high 42
11 Nov after 36.6 °C 36 % 39 km/h 0.7 mm Very high 40
12 Nov after 37.3 °C 36 % 32 km/h 1.1 mm High 36

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 8 Oct 2024
After · 9 Nov 2024

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 26 October 2024 the air beside the fire reached 120 µg/m³ of PM2.5. That day averaged 40: 2.7 times the WHO daily guideline (15).

PM2.5 peak120 µg/m³
Days over the guideline4 days
PM10173 µg/m³
Optical depth0.80
13 Oct17 Oct21 Oct25 Oct29 Oct
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 2,233Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the Roper Gulf fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 15 October 2024 to 2 November 2024 (19 days). The perimeter dates it from 15 October 2024 to 29 October 2024.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 65,211 hectares (652.1 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Roper Gulf (66,081 ha, 0.4 %); Burke (145 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 40.2 °C, humidity dropped to 8 % and gusts hit 49 km/h. The fire danger index (FWI) reached 76, class Very extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 29 October 2024 → 2 November 2024.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 2 polygons grouped in this page.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 15 October 2024 to 29 October 2024. 2,233 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
  • Probably a vegetation burn: not counted in the totals.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.