Roper Gulf fire, 31 May 2017 Roper Gulf
The fire started on 31 May 2017 in Roper Gulf, Australia, and satellites saw it burning for 9 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 5,233 hectares from heat detections, spread across a single municipality.
It is the 3305th largest in Northern Territory since 2016 (of 3515 with a page). Number 805 in Australia in 2017, of 862.
The power measured by the satellite is low (26.9 MW in the strongest hotspot), more typical of grass or stubble burning, or a slow surface fire, than of a large crown fire.
Compare with…
- Burnt area
- 5,233ha
- GWIS perimeter (Copernicus)
- Duration
- 9days
- 31 May 2017 – 8 Jun 2017
- Municipalities hit
- 1
- local government areas
- Started on
- 31 May
- 2017
- Heat detections
- 223
- in a single hotspot: 27 MW
- Danger at start
- 55
- Extreme · FWI index
- Average daily power
- 75MW
- detected power per day, on average
Where it burned
How it evolved, day by day
Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.
The weather it burned in
It had gone 9 days without rain (1 mm or more) when it started.
This area had burned before
17% of the perimeter overlaps earlier fires recorded since 2016: 905 ha in 2016.
How big is it?
London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).
Paris boundary: geoBoundaries · Institut national de l'information géographique et forestière (IGN-F) (Etalab Open License 2.0).
Madrid boundary: geoBoundaries · Open Data ESRI, IGN Central Registry of Cartography Area (CC BY 4.0).
Berlin boundary: geoBoundaries · Federal Agency for Cartography and Geodesy (dl-de/by-2-0).
This compares size, not location: both shapes are at the same scale, north up, centred on each other.
What happened to each town
-
Roper Gulf where it started5,230 ha reached on 31 May0.0 %
Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.
People and buildings inside the perimeter
GHSL 2015Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2015, satellite-based estimate).
This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.
Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu
The weather day by day
ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.
Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
| Day | High | Min. humidity | Peak gust | Rain | Danger (FWI) |
|---|---|---|---|---|---|
| 31 May | 28.6 °C | 19 % | 56 km/h | 0.0 mm | Extreme 55 |
| 1 Jun | 27.3 °C | 22 % | 53 km/h | 0.0 mm | Extreme 53 |
| 2 Jun | 29.5 °C | 29 % | 51 km/h | 0.0 mm | Very high 49 |
| 3 Jun | 30.1 °C | 28 % | 44 km/h | 0.0 mm | Very high 44 |
| 4 Jun | 30.0 °C | 36 % | 49 km/h | 0.0 mm | Very high 43 |
| 5 Jun | 29.8 °C | 34 % | 46 km/h | 0.0 mm | Very high 41 |
| 6 Jun | 28.5 °C | 26 % | 49 km/h | 0.0 mm | Very high 44 |
| 7 Jun | 27.6 °C | 19 % | 51 km/h | 0.0 mm | Very high 48 |
| 8 Jun | 26.3 °C | 17 % | 52 km/h | 0.0 mm | Extreme 51 |
| 9 Jun after | 25.2 °C | 18 % | 53 km/h | 0.0 mm | Extreme 52 |
| 10 Jun after | 24.0 °C | 20 % | 49 km/h | 0.0 mm | Very high 50 |
| 11 Jun after | 26.1 °C | 19 % | 50 km/h | 0.0 mm | Very high 49 |
| 12 Jun after | 25.8 °C | 21 % | 54 km/h | 0.0 mm | Extreme 52 |
| 13 Jun after | 26.7 °C | 16 % | 49 km/h | 0.0 mm | Very high 49 |
| 14 Jun after | 28.7 °C | 27 % | 45 km/h | 0.0 mm | Very high 45 |
| 15 Jun after | 28.5 °C | 27 % | 46 km/h | 0.0 mm | Very high 46 |
Before and after, from space
Drag the line to compare the same ground before the fire and after it.
If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.
Detections table · 223Every satellite heat detection, one by one, with time, satellite, power and coordinates.
| Date and time | Satellite | FRP (MW) | Lat | Lon |
|---|
Other fires nearby
- 18,912 haRoper Gulf17 August 2023 · 42 days · 20 km away
- 16,962 haWest Arnhem18 October 2023 · 19 days · 20 km away
- 37,363 haVictoria Daly31 August 2024 · 24 days · 32 km away
- 21,777 haVictoria Daly14 July 2016 · 28 days · 34 km away
- 17,090 haRoper Gulf14 December 2019 · 14 days · 36 km away
- 16,846 haVictoria Daly6 June 2019 · 38 days · 37 km away
Frequently asked questions
- How long did the Roper Gulf fire last?
- According to the heat detections seen by satellite inside the perimeter, it burned from 31 May 2017 to 8 June 2017 (9 days). The perimeter dates it from 31 May 2017 to 5 June 2017.
- How much area did it burn?
- The perimeter GWIS (Copernicus) rebuilt from heat detections is 5,233 hectares (52.3 km²). It is an estimate: official national figures may differ.
- Which municipalities burned?
- The fire only entered Roper Gulf (5,230 ha, 0.0 %).
- What was the weather like?
- During the fire the temperature reached 30.1 °C, humidity dropped to 19 % and gusts hit 56 km/h. The fire danger index (FWI) reached 55, class Extreme.
- Where does this data come from?
- From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.
Where to verify it
A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.
Emergency number: 000 · Emergency number and official warnings ›
Satellite cross-check
History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
- Last day with fire: 5 June 2017 → 8 June 2017.
Does something look wrong on this page?
This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.
Report an error
How we know this
- Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
- Dates adjusted with the VIIRS detections inside the perimeter, which said 31 May 2017 to 5 June 2017. 223 Suomi-NPP VIIRS detections on those dates.
- We have not matched this page with any official record.
- Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
- Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2015, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
Where this data comes from
The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.