How long did the Rodeiro fire last?

Copernicus dates it between 30 July 2020 and 31 July 2020: 2 days between the first and last image with fire.

How much area did it burn?

The perimeter Copernicus measured from satellite imagery is 114 hectares (1.1 km²). Official national figures may differ.

Which municipalities burned?

The fire only entered Rodeiro (114 ha, 0.7 %).

Did the fire reach a town?

The closest fire to a town centre came within 1.6 km of Rodeiro. That is the distance to the perimeter or nearest hotspot; it does not mean it entered the houses.

What was the weather like?

During the fire the temperature reached 28.7 °C, humidity dropped to 40 % and gusts hit 36 km/h. The fire danger index (FWI) reached 22, class High.

Where does this data come from?

From the EFFIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Spain (geoBoundaries). It is not an official report.

ES · Spain · 2020-07-30 → 2020-07-31

Rodeiro fire, July 2020 Rodeiro

Out · last detection 31 Jul 2020, 14:13 UTC

The fire started on 30 July 2020 in Rodeiro, Spain, and satellites saw it burning for 2 days. Copernicus mapped a burnt perimeter of 114 hectares from satellite imagery, spread across a single municipality.

It is the 31th largest in Pontevedra since 2016 (of 33 with a page). Number 79 in Spain in 2020, of 89.

Burnt area: 114ha; Copernicus perimeter
Duration: 2days; 30 Jul 2020 – 31 Jul 2020
Municipalities hit: 1; municipalities
Started on: 30 Jul; 2020
Heat detections: 4; in a single hotspot: 233 MW
Danger at start: 22; High · FWI index
Energy released: 243MW; sum of detected power

Play back 31 Jul 2020

HOTSPOTS BY DAY 30 Jul31 Jul

How it evolved, day by day

3031

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

29°high

36km/h · peak gust

40%lowest humidity

It had gone 32 days without rain (1 mm or more) when it started.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

What happened to each town

Rodeiro 2,232 inhabitants · 1.6 km from the town where it started

114 ha reached on 30 Jul

0.7 %

Burnt area inside each municipality, from crossing the official perimeter with administrative boundaries. The distance is from the town centre to the nearest fire: staying a kilometre away does not mean it reached the houses.

What burned

Other natural land81 %
Agricultural areas19 %

Land cover inside the perimeter according to Corine Land Cover, as reported by Copernicus.

Official record

According to EGIF (MITECO), this fire started on 30 July 2020 and burned 71 ha (the satellite measured 114 ha). The two figures differ a lot, so these may not be exactly the same fire: take them as nearby records.

Rodeiro 30 July 2020 · 15:26 71 ha · extinguished on 1 August 2020 · cause: arson

MITECO, Estadística General de Incendios Forestales (EGIF). This is the agency’s consolidated statistic: it measures the area in its own way, which is why it can differ from the satellite.

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day	High	Min. humidity	Peak gust	Rain	Danger (FWI)
30 Jul	28.7 °C	46 %	36 km/h	0.0 mm	High 22
31 Jul	25.5 °C	40 %	31 km/h	0.0 mm	High 22
1 Aug after	22.6 °C	53 %	39 km/h	0.0 mm	High 22
2 Aug after	22.5 °C	47 %	38 km/h	0.0 mm	High 22
3 Aug after	22.0 °C	55 %	34 km/h	0.0 mm	Moderate 20
4 Aug after	25.7 °C	42 %	33 km/h	0.0 mm	Moderate 21
5 Aug after	28.1 °C	39 %	30 km/h	0.0 mm	High 23
6 Aug after	31.0 °C	36 %	33 km/h	0.0 mm	High 28
7 Aug after	27.2 °C	48 %	35 km/h	0.0 mm	High 26
8 Aug after	27.7 °C	49 %	23 km/h	0.4 mm	High 21
9 Aug after	25.2 °C	59 %	32 km/h	0.0 mm	Moderate 20
10 Aug after	22.9 °C	58 %	35 km/h	0.0 mm	Moderate 21

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

↔

Before · 23 Jul 2020

After · 7 Aug 2020

Before After

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 30 July 2020 the air beside the fire reached 14 µg/m³ of PM2.5, but no daily average passed the WHO guideline (15).

PM2.5 peak14 µg/m³

Days over the guideline0 days

PM1018 µg/m³

28293031123

Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 4Every satellite heat detection, one by one, with time, satellite, power and coordinates.

⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.

Date and time	Satellite	FRP (MW)	Lat	Lon

Other fires nearby

All fires in Spain ›

Frequently asked questions

How long did the Rodeiro fire last?: Copernicus dates it between 30 July 2020 and 31 July 2020: 2 days between the first and last image with fire.
How much area did it burn?: The perimeter Copernicus measured from satellite imagery is 114 hectares (1.1 km²). Official national figures may differ.
Which municipalities burned?: The fire only entered Rodeiro (114 ha, 0.7 %).
Did the fire reach a town?: The closest fire to a town centre came within 1.6 km of Rodeiro. That is the distance to the perimeter or nearest hotspot; it does not mean it entered the houses.
What was the weather like?: During the fire the temperature reached 28.7 °C, humidity dropped to 40 % and gusts hit 36 km/h. The fire danger index (FWI) reached 22, class High.
Where does this data come from?: From the EFFIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Spain (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112

MITECO · Incendios forestales ↗
Protección Civil ↗

Satellite cross-check

NASA FIRMS ↗
EFFIS · Copernicus ↗

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error

What do you think is wrong?

Dates or duration Place or towns Burned area Name It was not a wildfire Same fire as another page Something else

What really happened?

Your connection to the fire (optional) Email (optional)

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112.

Where this data comes from

The perimeter and land cover come from the Copernicus European Forest Fire Information System (EFFIS), measured on MODIS and Sentinel-2 imagery and published under CC BY 4.0. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM3 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ slightly from each country’s official figure.

Where it burned