Skip to content
worldfires
BR · Brazil · –

Rio Grande do Piauí fire, September 2018 Rio Grande do Piauí, Pavussu

Out · last detection 4 Oct 2018, 04:33 UTC

The fire started on 2 September 2018 in Rio Grande do Piauí, Brazil, and satellites saw it burning for 33 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 5,698 hectares from heat detections, spread across 2 municipalities.

It is the 238th largest in Piaui since 2016 (of 665 with a page). Number 74 in Brazil in 2018, of 291.

Burnt area
5,698ha
GWIS perimeter (Copernicus)
Duration
33days
2 Sept 2018 – 4 Oct 2018
Municipalities hit
2
municipalities
Started on
2 Sept
2018
Heat detections
409
in a single hotspot: 111 MW
Danger at start
55
Extreme · FWI index
Average daily power
91MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 2 Sept4 Oct
4 Oct 2018

How it evolved, day by day

2 Sept 2018 · 39 MW · 11 3 Sept 2018 · 27 MW · 16 4 Sept 2018 · 32 MW · 7 5 Sept 2018 · 34 MW · 10 8 Sept 2018 · 2 MW · 1 9 Sept 2018 · 68 MW · 9 10 Sept 2018 · 47 MW · 7 11 Sept 2018 · 30 MW · 5 12 Sept 2018 · 9 MW · 3 13 Sept 2018 · 26 MW · 9 14 Sept 2018 · 183 MW · 24 15 Sept 2018 · 46 MW · 15 16 Sept 2018 · 48 MW · 7 17 Sept 2018 · 43 MW · 9 18 Sept 2018 · 948 MW · 27 19 Sept 2018 · 73 MW · 27 20 Sept 2018 · 118 MW · 23 21 Sept 2018 · 122 MW · 22 22 Sept 2018 · 61 MW · 9 23 Sept 2018 · 14 MW · 6 24 Sept 2018 · 17 MW · 9 25 Sept 2018 · 23 MW · 8 26 Sept 2018 · 139 MW · 14 27 Sept 2018 · 243 MW · 28 28 Sept 2018 · 67 MW · 17 29 Sept 2018 · 153 MW · 43 30 Sept 2018 · 63 MW · 15 1 Oct 2018 · 31 MW · 8 2 Oct 2018 · 95 MW · 15 3 Oct 2018 · 25 MW · 4 4 Oct 2018 · 4 MW · 1
2 Sept 11 Sept 18 Sept 25 Sept 2 Oct

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

38°high
53km/h · peak gust
21%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 3.6% of the area of London (57 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Rio Grande do Piauí 5,801 inhabitants where it started
    5,024 ha reached on 2 Sept
    7.8 %
  2. Pavussu 3,628 inhabitants
    711 ha reached on 3 Sept
    0.6 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area0.54 ha
Residents≈ 20

Inside the perimeter there were about 0.54 hectares of built-up land and about 20 residents (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Extreme FWI: 46 % of the area in Brazil 60 days without rain: 55 % of the area in Brazil

Day High Min. humidity Peak gust Rain Danger (FWI)
2 Sept 35.3 °C 30 % 47 km/h 0.0 mm Extreme 55
3 Sept 36.1 °C 32 % 41 km/h 0.0 mm Very high 46
4 Sept 37.5 °C 30 % 36 km/h 0.0 mm Very high 46
5 Sept 34.3 °C 45 % 31 km/h 1.6 mm High 33
6 Sept 32.1 °C 39 % 41 km/h 1.7 mm High 22
7 Sept 34.5 °C 31 % 53 km/h 0.0 mm Extreme 54
8 Sept 33.3 °C 37 % 51 km/h 0.0 mm Very high 50
9 Sept 34.5 °C 26 % 50 km/h 0.0 mm Extreme 54
10 Sept 35.0 °C 30 % 47 km/h 0.0 mm Extreme 52
11 Sept 35.6 °C 30 % 47 km/h 0.0 mm Extreme 51
12 Sept 36.1 °C 29 % 48 km/h 0.0 mm Extreme 57
13 Sept 34.4 °C 24 % 52 km/h 0.0 mm Extreme 67
14 Sept 34.8 °C 27 % 49 km/h 0.0 mm Extreme 60
15 Sept 35.1 °C 28 % 48 km/h 0.0 mm Extreme 57
16 Sept 36.5 °C 27 % 46 km/h 0.0 mm Extreme 55
17 Sept 38.0 °C 25 % 40 km/h 0.0 mm Extreme 52
18 Sept 38.0 °C 21 % 41 km/h 0.0 mm Extreme 58
19 Sept 37.4 °C 24 % 47 km/h 0.0 mm Extreme 58
20 Sept 36.1 °C 25 % 47 km/h 0.0 mm Extreme 64
21 Sept 36.2 °C 25 % 51 km/h 0.0 mm Extreme 63
22 Sept 36.6 °C 23 % 43 km/h 0.0 mm Extreme 55
23 Sept 37.2 °C 26 % 46 km/h 0.0 mm Extreme 60
24 Sept 35.6 °C 34 % 44 km/h 0.0 mm Extreme 55
25 Sept 35.0 °C 33 % 48 km/h 0.0 mm Extreme 56
26 Sept 36.1 °C 32 % 49 km/h 0.0 mm Extreme 58
27 Sept 36.9 °C 29 % 50 km/h 0.0 mm Extreme 58
28 Sept 37.8 °C 25 % 46 km/h 0.0 mm Extreme 54
29 Sept 38.2 °C 25 % 43 km/h 0.0 mm Extreme 52
30 Sept 37.2 °C 27 % 42 km/h 0.0 mm Extreme 52
1 Oct 36.5 °C 29 % 48 km/h 0.0 mm Extreme 57
2 Oct 37.0 °C 25 % 49 km/h 0.0 mm Extreme 55
3 Oct 37.7 °C 26 % 47 km/h 0.0 mm Extreme 53
4 Oct 37.9 °C 28 % 38 km/h 0.0 mm Extreme 51
5 Oct after 37.2 °C 30 % 23 km/h 0.0 mm Very high 42
6 Oct after 36.3 °C 28 % 44 km/h 0.0 mm Extreme 51
7 Oct after 36.4 °C 30 % 50 km/h 0.0 mm Extreme 57
8 Oct after 36.8 °C 27 % 47 km/h 0.0 mm Extreme 58
9 Oct after 37.5 °C 21 % 49 km/h 0.0 mm Extreme 60
10 Oct after 38.1 °C 20 % 49 km/h 0.0 mm Extreme 64
11 Oct after 37.7 °C 26 % 51 km/h 0.0 mm Extreme 56
12 Oct after 36.5 °C 29 % 52 km/h 0.0 mm Extreme 58
13 Oct after 36.9 °C 28 % 40 km/h 0.0 mm Extreme 54
14 Oct after 39.3 °C 26 % 25 km/h 0.0 mm Very high 40

Its twins: fires that started in the same weather

It started with an FWI of 55.3, a minimum humidity of 30% and more than two months without rain. Fires in the area that started in weather like this since 2016: 51.

FWI at the start 55.3
Minimum humidity 30 %
Days without rain 60+
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Manoel Emídio fire, August 2021
5,012 ha 18 days FWI 54.9 Min. humidity 29 % 95 km away, in 2021

First rain (1 mm or more) after it ended: none in the following ten days.

What happened to them

17 days
median duration
4,613 ha
median area
16 %
went past 10,000 ha
2.2 mm
rain at the end (median; 10 of 51 had it)

It burned an area similar to its twins (5,698 ha against a median of 4,613 ha) and lasted 33 days, against 17 days.

In 41 of 51, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.2 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
53km/h · max. gust

It was considered over on 4 Oct, and not even 1 mm fell in the following ten days: it went out without rain. Twins with rain when they ended: 10 of 51, with a median of 2.2 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 26 Aug 2018
After · 11 Oct 2018

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 409Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Brazil

Frequently asked questions

How long did the Rio Grande do Piauí fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 2 September 2018 to 4 October 2018 (33 days). The perimeter dates it from 9 September 2018 to 3 October 2018.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 5,698 hectares (57.0 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Rio Grande do Piauí (5,024 ha, 7.8 %); Pavussu (711 ha, 0.6 %).
What was the weather like?
During the fire the temperature reached 38.2 °C, humidity dropped to 21 % and gusts hit 53 km/h. The fire danger index (FWI) reached 67, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Brazil (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 51. Their median duration was 17 days and their median area 4,613 ha; 16 % went past 10,000 ha. In 41 of 51, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.2 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 193 · Emergency number and official warnings

Satellite cross-check

History of this page · 2 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 3 October 2018 → 4 October 2018.
  2. Start date: 9 September 2018 → 2 September 2018.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 193.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 9 September 2018 to 3 October 2018. 409 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.