Skip to content
worldfires
UK · United Kingdom · –

Rhondda Cynon Taf fire, 2 August 2026 Rhondda Cynon Taf

Out · last detection 13 Aug 2026, 14:01 UTC

The fire started on 2 August 2026 in Rhondda Cynon Taf, United Kingdom, and satellites saw it burning for 27 days. Copernicus mapped a burnt perimeter of 157 hectares from satellite imagery, spread across a single municipality.

It is the 16th largest in Wales since 2016 (of 25 with a page). Number 17 in United Kingdom in 2026, of 21.

The power measured by the satellite is low (6.0 MW in the strongest hotspot), more typical of grass or stubble burning, or a slow surface fire, than of a large crown fire.

Burnt area
157ha
Copernicus perimeter
Duration
≈ 27days
2 Aug 2026 – 28 Aug 2026
Municipalities hit
1
districts
Started on
2 Aug
2026
Heat detections
24
in a single hotspot: 6 MW
Danger at start
23
High · FWI index
Average daily power
5MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 2 Aug28 Aug
13 Aug 2026

How it evolved, day by day

2 Aug 2026 · 5 MW · 3 3 Aug 2026 · 5 MW · 3 4 Aug 2026 · 18 MW · 9 6 Aug 2026 · 2 MW · 1 7 Aug 2026 · 1 MW · 1 8 Aug 2026 · 1 MW · 1 11 Aug 2026 · 6 MW · 1 12 Aug 2026 · 7 MW · 4 13 Aug 2026 · 3 MW · 1
2 Aug 4 Aug 7 Aug 11 Aug 13 Aug

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

30°high
55km/h · peak gust
32%lowest humidity

It had gone 32 days without rain (1 mm or more) when it started. Rain came after the fire: 18.4 mm on 29 Aug.

This area had burned before

31% of the perimeter overlaps earlier fires recorded since 2016: 49 ha in 2018.

What happened to each town

  1. Rhondda Cynon Taf where it started
    157 ha reached on 2 Aug
    0.4 %

Burnt area inside each municipality, from crossing the official perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

What burned

  • Scrub and transitional woodland44 %
  • Other natural land40 %
  • Coniferous forest16 %

Land cover inside the perimeter according to Corine Land Cover, as reported by Copernicus.

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
2 Aug 21.5 °C 42 % 28 km/h 1.0 mm High 23
3 Aug 24.5 °C 42 % 30 km/h 0.0 mm Moderate 19
4 Aug 20.2 °C 66 % 45 km/h 3.3 mm Low 7
5 Aug 17.6 °C 54 % 55 km/h 0.5 mm Moderate 15
6 Aug 17.4 °C 46 % 41 km/h 0.0 mm Moderate 18
7 Aug 19.6 °C 46 % 25 km/h 0.0 mm Moderate 17
8 Aug 21.0 °C 42 % 26 km/h 0.0 mm Moderate 21
9 Aug 22.7 °C 40 % 38 km/h 0.0 mm High 26
10 Aug 21.5 °C 41 % 22 km/h 0.0 mm Moderate 21
11 Aug 24.7 °C 41 % 34 km/h 0.0 mm High 28
12 Aug 30.2 °C 32 % 39 km/h 0.0 mm High 33
13 Aug 27.7 °C 37 % 31 km/h 0.0 mm High 29
14 Aug 24.3 °C 62 % 31 km/h 0.6 mm High 22
15 Aug 21.5 °C 49 % 33 km/h 0.0 mm Moderate 21
16 Aug 21.3 °C 51 % 31 km/h 0.0 mm Moderate 20
17 Aug 21.5 °C 58 % 40 km/h 0.3 mm High 22
18 Aug 19.4 °C 62 % 41 km/h 0.7 mm High 26
19 Aug 18.4 °C 58 % 50 km/h 2.0 mm Low 11
20 Aug 16.8 °C 63 % 41 km/h 1.2 mm Low 9
21 Aug 16.8 °C 51 % 24 km/h 2.4 mm Low 7
22 Aug 18.2 °C 45 % 24 km/h 0.0 mm Very low 5
23 Aug 20.7 °C 36 % 18 km/h 0.0 mm Low 10
24 Aug 21.3 °C 37 % 50 km/h 0.0 mm High 32
25 Aug 20.2 °C 53 % 51 km/h 0.8 mm High 29
26 Aug 22.7 °C 52 % 32 km/h 0.1 mm High 22
27 Aug 18.9 °C 74 % 34 km/h 11.1 mm Very low 0
28 Aug 16.8 °C 86 % 45 km/h 3.6 mm Very low 0
29 Aug after 17.9 °C 86 % 42 km/h 18.4 mm Very low 0

Its twins: fires that started in the same weather

It started with an FWI of 23.0, a minimum humidity of 42% and 32 days without rain. Fires in the area that started in weather like this since 2018: 10.

FWI at the start 23.0
Minimum humidity 42 %
Days without rain 32
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Derbyshire fire, July 2026
660 ha 14 days FWI 23.9 Min. humidity 45 % 227 km away, in 2026

First rain (1 mm or more) after it ended: 3.8 mm on 26 Jul.

What happened to them

Fires in the area that started in similar weather: 10. With fewer than 15 we give no figures: they would be more noise than signal.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

18.4 mmfirst rain
29 Augthe day after it ended
55km/h · max. gust

It was considered over on 28 Aug, and on 29 Aug 18.4 mm fell. We do not know whether the rain or the firefighters put it out.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2018.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 26 Jul 2026
After · 4 Sept 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 4 August 2026 the air beside the fire reached 13 µg/m³ of PM2.5, but no daily average passed the WHO guideline (15).

PM2.5 peak13 µg/m³
Days over the guideline0 days
PM1020 µg/m³
Optical depth0.27
31 Jul2 Aug4 Aug
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 24Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in United Kingdom

Frequently asked questions

How long did the Rhondda Cynon Taf fire last?
The official perimeter only gives the start date (2 August 2026). The end comes from the heat detections inside the perimeter: it burned until 28 August 2026 (27 days from 2 August 2026), the last day with detections before more than 10 days in a row without any, so it is approximate.
How much area did it burn?
The perimeter Copernicus measured from satellite imagery is 157 hectares (1.6 km²). Official national figures may differ.
Which municipalities burned?
The fire only entered Rhondda Cynon Taf (157 ha, 0.4 %).
What was the weather like?
During the fire the temperature reached 30.2 °C, humidity dropped to 32 % and gusts hit 55 km/h. The fire danger index (FWI) reached 33, class High.
Where does this data come from?
From the EFFIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of United Kingdom (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 999 · 112 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 999 · 112.

How we know this
  • Perimeter: EFFIS (Copernicus), mapped on satellite imagery.
  • The official perimeter has no end date: the end is the last day with VIIRS detections inside the perimeter before a gap of more than 10 days (150 days at most), so it is approximate. 24 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.

How we build fire pages: methodology

Where this data comes from

The perimeter and land cover come from the Copernicus European Forest Fire Information System (EFFIS), measured on MODIS and Sentinel-2 imagery and published under CC BY 4.0. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM3 (Open Government Licence v3.0). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ slightly from each country’s official figure.