Skip to content
worldfires
CA · Canada · –

Region 3, Unorganized fire, 4 July 2016 Region 3, Unorganized

Out · last detection 26 Aug 2016, 09:36 UTC

The fire started on 4 July 2016 in Region 3, Unorganized, Canada, and satellites saw it burning for 54 days. Canada’s CWFIS (Natural Resources Canada) mapped an official burnt perimeter of 27,324 hectares from satellite imagery, spread across a single census subdivision.

It is the 47th largest in Northwest Territories since 2016 (of 358 with a page). Number 4 in Canada in 2016, of 88.

Burnt area
27,324ha
official perimeter (CWFIS)
Duration
54days
4 Jul 2016 – 26 Aug 2016
Census subdivisions hit
1
municipalities
Started on
4 Jul
2016
Heat detections
3,186
in a single hotspot: 583 MW
Danger at start
15
Moderate · FWI index
Average daily power
958MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 4 Jul26 Aug
26 Aug 2016

How it evolved, day by day

5 Jul 2016 · 204 MW · 8 6 Jul 2016 · 1,092 MW · 87 7 Jul 2016 · 110 MW · 30 8 Jul 2016 · 54 MW · 38 12 Jul 2016 · 399 MW · 36 13 Jul 2016 · 297 MW · 32 14 Jul 2016 · 1,714 MW · 162 15 Jul 2016 · 19,429 MW · 315 16 Jul 2016 · 687 MW · 63 17 Jul 2016 · 285 MW · 202 22 Jul 2016 · 121 MW · 15 23 Jul 2016 · 1,350 MW · 214 24 Jul 2016 · 558 MW · 87 25 Jul 2016 · 77 MW · 47 27 Jul 2016 · 699 MW · 110 28 Jul 2016 · 4,939 MW · 401 29 Jul 2016 · 41 MW · 23 30 Jul 2016 · 4 MW · 3 31 Jul 2016 · 109 MW · 14 1 Aug 2016 · 100 MW · 26 2 Aug 2016 · 10 MW · 3 3 Aug 2016 · 95 MW · 27 4 Aug 2016 · 237 MW · 69 5 Aug 2016 · 229 MW · 128 6 Aug 2016 · 15 MW · 13 8 Aug 2016 · 280 MW · 50 9 Aug 2016 · 1,534 MW · 199 10 Aug 2016 · 46 MW · 24 14 Aug 2016 · 3 MW · 1 16 Aug 2016 · 6 MW · 7 17 Aug 2016 · 2 MW · 2 18 Aug 2016 · 66 MW · 10 19 Aug 2016 · 45 MW · 31 20 Aug 2016 · 9 MW · 2 21 Aug 2016 · 64 MW · 9 22 Aug 2016 · 732 MW · 80 23 Aug 2016 · 1,070 MW · 228 24 Aug 2016 · 1,458 MW · 280 25 Aug 2016 · 166 MW · 109 26 Aug 2016 · 1 MW · 1
5 Jul 15 Jul 29 Jul 6 Aug 19 Aug

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

30°high
52km/h · peak gust
19%lowest humidity

It had gone 0 days without rain (1 mm or more) when it started. Rain came after the fire: 1.9 mm on 27 Aug.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 17% of the area of London (273 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each census subdivision

  1. Region 3, Unorganized where it started
    26,714 ha reached on 5 Jul
    0.8 %

Burnt area inside each census subdivision, from crossing the official perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2015
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2015, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
4 Jul 30.5 °C 19 % 29 km/h 0.0 mm Moderate 15
5 Jul 27.2 °C 22 % 34 km/h 0.2 mm High 26
6 Jul 23.2 °C 28 % 45 km/h 0.0 mm High 33
7 Jul 21.1 °C 29 % 36 km/h 0.0 mm High 30
8 Jul 19.8 °C 37 % 31 km/h 0.0 mm High 26
9 Jul 19.2 °C 51 % 30 km/h 3.0 mm Moderate 12
10 Jul 21.5 °C 40 % 31 km/h 0.7 mm Low 6
11 Jul 24.0 °C 30 % 33 km/h 0.0 mm Moderate 13
12 Jul 25.4 °C 30 % 42 km/h 0.0 mm High 35
13 Jul 27.6 °C 20 % 24 km/h 0.0 mm High 29
14 Jul 29.4 °C 23 % 37 km/h 0.0 mm High 38
15 Jul 28.7 °C 21 % 49 km/h 0.0 mm Very high 45
16 Jul 24.2 °C 37 % 52 km/h 0.0 mm Very high 45
17 Jul 26.8 °C 33 % 37 km/h 0.9 mm High 30
18 Jul 22.1 °C 39 % 36 km/h 1.5 mm Moderate 15
19 Jul 18.3 °C 47 % 43 km/h 5.0 mm Low 5
20 Jul 14.0 °C 54 % 40 km/h 2.8 mm Very low 3
21 Jul 11.7 °C 39 % 47 km/h 0.3 mm Low 8
22 Jul 18.2 °C 36 % 40 km/h 0.0 mm Moderate 16
23 Jul 16.0 °C 36 % 30 km/h 0.0 mm Moderate 17
24 Jul 16.5 °C 29 % 32 km/h 0.0 mm High 22
25 Jul 18.0 °C 36 % 29 km/h 0.0 mm Moderate 19
26 Jul 19.5 °C 51 % 44 km/h 0.4 mm Moderate 21
27 Jul 20.7 °C 27 % 20 km/h 0.0 mm Moderate 15
28 Jul 25.0 °C 32 % 36 km/h 0.0 mm High 30
29 Jul 25.4 °C 41 % 30 km/h 5.7 mm Low 6
30 Jul 22.2 °C 56 % 28 km/h 0.3 mm Very low 3
31 Jul 24.2 °C 37 % 32 km/h 0.3 mm Moderate 12
1 Aug 24.3 °C 38 % 42 km/h 0.1 mm High 26
2 Aug 22.1 °C 35 % 27 km/h 0.0 mm Moderate 15
3 Aug 24.4 °C 31 % 19 km/h 0.0 mm Moderate 17
4 Aug 25.8 °C 33 % 23 km/h 0.3 mm High 23
5 Aug 17.6 °C 56 % 40 km/h 2.4 mm Moderate 13
6 Aug 16.3 °C 36 % 31 km/h 0.0 mm Very low 4
7 Aug 17.5 °C 37 % 23 km/h 0.8 mm Low 10
8 Aug 20.3 °C 30 % 35 km/h 0.0 mm High 24
9 Aug 21.0 °C 31 % 45 km/h 0.0 mm High 30
10 Aug 19.8 °C 49 % 44 km/h 10.3 mm High 31
11 Aug 18.4 °C 69 % 36 km/h 6.6 mm Very low 0
12 Aug 15.8 °C 69 % 22 km/h 0.2 mm Very low 1
13 Aug 19.6 °C 54 % 15 km/h 0.0 mm Very low 2
14 Aug 23.5 °C 43 % 27 km/h 0.0 mm Low 10
15 Aug 26.4 °C 35 % 31 km/h 0.3 mm Moderate 16
16 Aug 24.0 °C 39 % 32 km/h 0.0 mm Moderate 14
17 Aug 18.4 °C 60 % 50 km/h 0.3 mm Moderate 21
18 Aug 20.5 °C 42 % 28 km/h 0.0 mm Moderate 14
19 Aug 22.2 °C 45 % 32 km/h 0.2 mm Moderate 17
20 Aug 21.9 °C 46 % 30 km/h 1.2 mm Moderate 15
21 Aug 22.1 °C 34 % 24 km/h 0.0 mm Moderate 13
22 Aug 23.9 °C 28 % 25 km/h 0.0 mm Moderate 17
23 Aug 26.1 °C 27 % 38 km/h 0.0 mm High 30
24 Aug 20.7 °C 41 % 45 km/h 0.2 mm High 28
25 Aug 19.6 °C 62 % 42 km/h 3.2 mm Very low 4
26 Aug 16.6 °C 58 % 32 km/h 1.0 mm Very low 5
27 Aug after 11.2 °C 52 % 38 km/h 1.9 mm Very low 4

Its twins: fires that started in the same weather

It started with an FWI of 15.2, a minimum humidity of 19% and rain the day before. Fires in the area that started in weather like this since 2017: 10.

FWI at the start 15.2
Minimum humidity 19 %
Days without rain 0
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Region 3, Unorganized fire, June 2022
18,709 ha 66 days FWI 20.0 Min. humidity 19 % 135 km away, in 2022

First rain (1 mm or more) after it ended: 4.6 mm on 30 Aug.

What happened to them

Fires in the area that started in similar weather: 10. With fewer than 15 we give no figures: they would be more noise than signal.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

1.9 mmfirst rain
27 Augthe day after it ended
52km/h · max. gust

It was considered over on 26 Aug, and on 27 Aug 1.9 mm fell. We do not know whether the rain or the firefighters put it out.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2017.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 27 Jun 2016
After · 2 Sept 2016

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 3,186Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Canada

Frequently asked questions

How long did the Region 3, Unorganized fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 4 July 2016 to 26 August 2016 (54 days). The perimeter dates it from 4 July 2016 to 24 August 2016.
How much area did it burn?
The official perimeter mapped by Canada’s CWFIS (Natural Resources Canada) is 27,324 hectares (273.2 km²). Other tallies, such as those of provincial agencies, may give slightly different figures.
Which census subdivisions burned?
The fire only entered Region 3, Unorganized (26,714 ha, 0.8 %).
What was the weather like?
During the fire the temperature reached 30.5 °C, humidity dropped to 19 % and gusts hit 52 km/h. The fire danger index (FWI) reached 45, class Very high.
Where does this data come from?
From the official burnt perimeter of Canada’s CWFIS (NBAC, Natural Resources Canada) or, for the current season and until NBAC publishes it, the one rebuilt by GWIS (Copernicus); from NASA FIRMS VIIRS hotspots; and from the administrative boundaries of Canada. It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 911 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 911.

How we know this
  • Perimeter: NBAC (Natural Resources Canada), official.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 4 July 2016 to 24 August 2016. 3,186 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2015, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter is official: it comes from the National Burned Area Composite (NBAC) of the Canadian Wildland Fire Information System (CWFIS), Natural Resources Canada, which maps it on satellite imagery and publishes it under the Open Government Licence – Canada. Until NBAC publishes the current season, this year’s fires carry the perimeter rebuilt from heat detections by GWIS (Copernicus, CC BY 4.0), which is approximate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Census subdivision boundaries come from geoBoundaries ADM3 (Open Data Commons Open Database License 1.0). The area per census subdivision is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ slightly from official figures.