Skip to content
worldfires
CA · Canada · –

Region 2, Unorganized fire, 7 July 2016 Region 2, Unorganized

Out · last detection 16 Jul 2016, 22:23 UTC

The fire started on 7 July 2016 in Region 2, Unorganized, Canada, and satellites saw it burning for 10 days. Canada’s CWFIS (Natural Resources Canada) mapped an official burnt perimeter of 1,321 hectares from satellite imagery, spread across a single census subdivision.

It is the 331th largest in Northwest Territories since 2016 (of 358 with a page). Number 80 in Canada in 2016, of 88.

Burnt area
1,321ha
official perimeter (CWFIS)
Duration
10days
7 Jul 2016 – 16 Jul 2016
Census subdivisions hit
1
municipalities
Started on
7 Jul
2016
Heat detections
95
in a single hotspot: 79 MW
Danger at start
4
Very low · FWI index
Average daily power
258MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 7 Jul16 Jul
16 Jul 2016

How it evolved, day by day

10 Jul 2016 · 2 MW · 2 11 Jul 2016 · 10 MW · 2 13 Jul 2016 · 75 MW · 5 15 Jul 2016 · 947 MW · 47 16 Jul 2016 · 256 MW · 39
10 Jul 11 Jul 13 Jul 15 Jul 16 Jul

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

31°high
49km/h · peak gust
33%lowest humidity

It had gone 0 days without rain (1 mm or more) when it started. Rain came after the fire: 1.7 mm on 17 Jul.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 0.8% of the area of London (13 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each census subdivision

  1. Region 2, Unorganized where it started
    1,391 ha reached on 10 Jul
    0.0 %

Burnt area inside each census subdivision, from crossing the official perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2015
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2015, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
7 Jul 26.6 °C 37 % 49 km/h 0.0 mm Very low 4
8 Jul 26.1 °C 35 % 38 km/h 0.0 mm Low 11
9 Jul 25.8 °C 33 % 38 km/h 0.0 mm Moderate 16
10 Jul 24.5 °C 44 % 39 km/h 0.0 mm Moderate 17
11 Jul 25.7 °C 43 % 29 km/h 0.0 mm Moderate 13
12 Jul 25.1 °C 45 % 18 km/h 0.0 mm Low 10
13 Jul 26.9 °C 37 % 13 km/h 0.0 mm Low 10
14 Jul 29.4 °C 35 % 26 km/h 0.0 mm Moderate 16
15 Jul 30.9 °C 35 % 36 km/h 0.2 mm Moderate 18
16 Jul 22.0 °C 53 % 30 km/h 0.0 mm Moderate 13
17 Jul after 23.5 °C 48 % 57 km/h 1.7 mm Moderate 18

Its twins: fires that started in the same weather

It started with an FWI of 3.5, a minimum humidity of 37% and rain the day before. Fires in the area that started in weather like this since 2017: 15.

FWI at the start 3.5
Minimum humidity 37 %
Days without rain 0
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Region 2, Unorganized fire, June 2017
22,715 ha 56 days FWI 3.6 Min. humidity 37 % 162 km away, in 2017

First rain (1 mm or more) after it ended: 7.1 mm on 14 Aug.

What happened to them

28 days
median duration
4,494 ha
median area
33 %
went past 10,000 ha
4.5 mm
rain at the end (median; 15 of 15 had it)

It stayed below its twins: 1,321 ha against a median of 4,494 ha. It lasted 10 days, against 28 days.

All of them had rain in the ten days after the end: the first rainy day brought a median of 4.5 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

1.7 mmfirst rain
17 Julthe day after it ended
49km/h · max. gust

It was considered over on 16 Jul, and on 17 Jul 1.7 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 15 of 15, with a median of 4.5 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2017.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 30 Jun 2016
After · 23 Jul 2016

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 95Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Canada

Frequently asked questions

How long did the Region 2, Unorganized fire last?
It burned between 7 July 2016 and 16 July 2016: 10 days, according to the dates recorded by Canada’s CWFIS and the heat detections seen by satellite.
How much area did it burn?
The official perimeter mapped by Canada’s CWFIS (Natural Resources Canada) is 1,321 hectares (13.2 km²). Other tallies, such as those of provincial agencies, may give slightly different figures.
Which census subdivisions burned?
The fire only entered Region 2, Unorganized (1,391 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 30.9 °C, humidity dropped to 33 % and gusts hit 49 km/h. The fire danger index (FWI) reached 18, class Moderate.
Where does this data come from?
From the official burnt perimeter of Canada’s CWFIS (NBAC, Natural Resources Canada) or, for the current season and until NBAC publishes it, the one rebuilt by GWIS (Copernicus); from NASA FIRMS VIIRS hotspots; and from the administrative boundaries of Canada. It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2017 with a similar FWI, humidity and dry spell: 15. Their median duration was 28 days and their median area 4,494 ha; 33 % went past 10,000 ha. All of them had rain in the ten days after the end: the first rainy day brought a median of 4.5 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 911 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 911.

How we know this
  • Perimeter: NBAC (Natural Resources Canada), official.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 95 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2015, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter is official: it comes from the National Burned Area Composite (NBAC) of the Canadian Wildland Fire Information System (CWFIS), Natural Resources Canada, which maps it on satellite imagery and publishes it under the Open Government Licence – Canada. Until NBAC publishes the current season, this year’s fires carry the perimeter rebuilt from heat detections by GWIS (Copernicus, CC BY 4.0), which is approximate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Census subdivision boundaries come from geoBoundaries ADM3 (Open Data Commons Open Database License 1.0). The area per census subdivision is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ slightly from official figures.