Quara fire, 13 November 2017 Quara
The fire started on 13 November 2017 in Quara, Ethiopia, and satellites saw it burning for 18 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 8,325 hectares from heat detections, spread across a single municipality.
It is the 18th largest in Amhara since 2016 (of 172 with a page). Number 22 in Ethiopia in 2017, of 266.
Compare with…
Suggestions: Quara · 2016Quara · 2016Quara · 2016Quara · 2024
- Burnt area
- 8,325ha
- GWIS perimeter (Copernicus)
- Duration
- 18days
- 13 Nov 2017 – 30 Nov 2017
- Municipalities hit
- 1
- districts
- Started on
- 13 Nov
- 2017
- Heat detections
- 218
- in a single hotspot: 42 MW
- Danger at start
- 44
- Very high · FWI index
- Average daily power
- 99MW
- detected power per day, on average
Where it burned
How it evolved, day by day
Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.
The weather it burned in
It had gone 14 days without rain (1 mm or more) when it started.
This area had burned before
65% of the perimeter overlaps earlier fires recorded since 2016: 5,383 ha in 2016.
- 4,453 ha Quara fire, November 2016 16,827 ha in total; the hectares shown are those it shares with this fire
- 764 ha Quara fire, November 2016 2,154 ha in total; the hectares shown are those it shares with this fire
- 166 ha Quara fire, November 2016 4,175 ha in total; the hectares shown are those it shares with this fire
How big is it?
London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).
Paris boundary: geoBoundaries · Institut national de l'information géographique et forestière (IGN-F) (Etalab Open License 2.0).
Madrid boundary: geoBoundaries · Open Data ESRI, IGN Central Registry of Cartography Area (CC BY 4.0).
Berlin boundary: geoBoundaries · Federal Agency for Cartography and Geodesy (dl-de/by-2-0).
This compares size, not location: both shapes are at the same scale, north up, centred on each other.
What happened to each town
-
Quara where it started8,370 ha reached on 13 Nov1.0 %
Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.
People and buildings inside the perimeter
GHSL 2015Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2015, satellite-based estimate).
This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.
Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu
The weather day by day
ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.
Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
| Day | High | Min. humidity | Peak gust | Rain | Danger (FWI) |
|---|---|---|---|---|---|
| 13 Nov | 37.6 °C | 22 % | 34 km/h | 0.0 mm | Very high 44 |
| 14 Nov | 37.6 °C | 19 % | 21 km/h | 0.0 mm | High 37 |
| 15 Nov | 38.5 °C | 15 % | 22 km/h | 0.0 mm | Very high 38 |
| 16 Nov | 38.7 °C | 14 % | 28 km/h | 0.0 mm | Very high 41 |
| 17 Nov | 38.4 °C | 12 % | 23 km/h | 0.0 mm | Very high 41 |
| 18 Nov | 38.9 °C | 12 % | 24 km/h | 0.0 mm | Very high 42 |
| 19 Nov | 38.8 °C | 11 % | 23 km/h | 0.0 mm | Very high 41 |
| 20 Nov | 38.5 °C | 11 % | 24 km/h | 0.0 mm | Very high 44 |
| 21 Nov | 37.0 °C | 15 % | 32 km/h | 0.0 mm | Very high 50 |
| 22 Nov | 35.9 °C | 16 % | 35 km/h | 0.0 mm | Extreme 52 |
| 23 Nov | 36.0 °C | 17 % | 28 km/h | 0.0 mm | Very high 48 |
| 24 Nov | 36.6 °C | 19 % | 26 km/h | 0.0 mm | Very high 49 |
| 25 Nov | 36.8 °C | 19 % | 27 km/h | 0.0 mm | Very high 49 |
| 26 Nov | 36.2 °C | 20 % | 28 km/h | 0.0 mm | Very high 46 |
| 27 Nov | 36.9 °C | 19 % | 28 km/h | 0.0 mm | Very high 46 |
| 28 Nov | 37.7 °C | 17 % | 30 km/h | 0.0 mm | Very high 46 |
| 29 Nov | 37.7 °C | 18 % | 30 km/h | 0.0 mm | Very high 48 |
| 30 Nov | 37.7 °C | 18 % | 31 km/h | 0.0 mm | Extreme 54 |
| 1 Dec after | 36.6 °C | 20 % | 31 km/h | 0.0 mm | Extreme 52 |
| 2 Dec after | 36.3 °C | 21 % | 25 km/h | 0.0 mm | Very high 48 |
| 3 Dec after | 37.4 °C | 18 % | 32 km/h | 0.0 mm | Very high 47 |
| 4 Dec after | 38.3 °C | 15 % | 32 km/h | 0.0 mm | Very high 47 |
| 5 Dec after | 38.1 °C | 13 % | 24 km/h | 0.0 mm | Very high 46 |
| 6 Dec after | 37.7 °C | 13 % | 27 km/h | 0.0 mm | Very high 46 |
| 7 Dec after | 37.3 °C | 13 % | 34 km/h | 0.0 mm | Extreme 51 |
| 8 Dec after | 37.4 °C | 13 % | 34 km/h | 0.0 mm | Extreme 51 |
| 9 Dec after | 37.9 °C | 16 % | 26 km/h | 0.0 mm | Very high 49 |
| 10 Dec after | 37.4 °C | 11 % | 22 km/h | 0.0 mm | Very high 48 |
Before and after, from space
Drag the line to compare the same ground before the fire and after it.
If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.
Detections table · 218Every satellite heat detection, one by one, with time, satellite, power and coordinates.
| Date and time | Satellite | FRP (MW) | Lat | Lon |
|---|
Other fires nearby
- 16,681 haQuara8 December 2024 · 19 days · 5 km away
- 35,770 haQuara19 December 2025 · 31 days · 6 km away
- 23,857 haQuara1 December 2019 · 22 days · 6 km away
- 15,764 haQuara14 November 2021 · 22 days · 12 km away
- 16,827 haQuara22 November 2016 · 12 days · 14 km away
- 39,124 haQuara5 November 2020 · 24 days · 23 km away
Frequently asked questions
- How long did the Quara fire last?
- According to the heat detections seen by satellite inside the perimeter, it burned from 13 November 2017 to 30 November 2017 (18 days). The perimeter dates it from 14 November 2017 to 24 November 2017.
- How much area did it burn?
- The perimeter GWIS (Copernicus) rebuilt from heat detections is 8,325 hectares (83.2 km²). It is an estimate: official national figures may differ.
- Which municipalities burned?
- The fire only entered Quara (8,370 ha, 1.0 %).
- What was the weather like?
- During the fire the temperature reached 38.9 °C, humidity dropped to 11 % and gusts hit 35 km/h. The fire danger index (FWI) reached 54, class Extreme.
- Where does this data come from?
- From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Ethiopia (geoBoundaries). It is not an official report.
Where to verify it
A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.
Satellite cross-check
History of this page · 2 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
- Last day with fire: 24 November 2017 → 30 November 2017.
- Start date: 14 November 2017 → 13 November 2017.
Does something look wrong on this page?
This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.
Report an error
How we know this
- Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 3 polygons grouped in this page.
- Dates adjusted with the VIIRS detections inside the perimeter, which said 14 November 2017 to 24 November 2017. 218 Suomi-NPP VIIRS detections on those dates.
- We have not matched this page with any official record.
- Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
- Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2015, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
Where this data comes from
The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM3 (Open Data Commons Open Database License 1.0). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.