Skip to content
worldfires
BR · Brazil · –

Porto Velho fire, July 2018 Porto Velho

Out · last detection 4 Aug 2018, 17:53 UTC

The fire started on 21 July 2018 in Porto Velho, Brazil, and satellites saw it burning for 17 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 4,464 hectares from heat detections, spread across a single municipality.

It is the 138th largest in Rondônia since 2016 (of 288 with a page). Number 129 in Brazil in 2018, of 291.

Burnt area
4,464ha
GWIS perimeter (Copernicus)
Duration
17days
21 Jul 2018 – 6 Aug 2018
Municipalities hit
1
municipalities
Started on
21 Jul
2018
Heat detections
287
in a single hotspot: 132 MW
Danger at start
24
High · FWI index
Average daily power
430MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 21 Jul6 Aug
4 Aug 2018

How it evolved, day by day

21 Jul 2018 · 1,075 MW · 22 22 Jul 2018 · 1,073 MW · 42 23 Jul 2018 · 80 MW · 16 24 Jul 2018 · 657 MW · 33 25 Jul 2018 · 178 MW · 25 26 Jul 2018 · 199 MW · 10 27 Jul 2018 · 1,685 MW · 65 28 Jul 2018 · 348 MW · 33 29 Jul 2018 · 73 MW · 12 30 Jul 2018 · 197 MW · 23 1 Aug 2018 · 3 MW · 1 3 Aug 2018 · 9 MW · 2 4 Aug 2018 · 8 MW · 3
21 Jul 24 Jul 27 Jul 30 Jul 4 Aug

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

36°high
35km/h · peak gust
30%lowest humidity

It had gone 4 days without rain (1 mm or more) when it started. Rain came after the fire: 1.7 mm on 9 Aug.

This area had burned before

93% of the perimeter overlaps earlier fires recorded since 2016: 4,115 ha in 2016, 148 ha in 2017.

How big is it?

10 km
It burned the equivalent of 2.8% of the area of London (45 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Porto Velho 460,434 inhabitants where it started
    4,500 ha reached on 21 Jul
    0.1 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
21 Jul 31.1 °C 36 % 35 km/h 0.0 mm High 24
22 Jul 31.5 °C 39 % 30 km/h 0.0 mm High 22
23 Jul 33.8 °C 36 % 24 km/h 0.0 mm High 23
24 Jul 32.5 °C 38 % 31 km/h 0.0 mm High 28
25 Jul 32.4 °C 37 % 26 km/h 0.0 mm High 25
26 Jul 32.6 °C 36 % 30 km/h 0.0 mm High 27
27 Jul 33.9 °C 30 % 20 km/h 0.0 mm High 25
28 Jul 34.6 °C 32 % 18 km/h 0.0 mm High 24
29 Jul 34.3 °C 40 % 16 km/h 0.0 mm High 25
30 Jul 34.0 °C 46 % 20 km/h 0.0 mm High 23
31 Jul 34.6 °C 44 % 21 km/h 0.5 mm High 24
1 Aug 32.6 °C 50 % 23 km/h 0.9 mm Moderate 21
2 Aug 32.4 °C 51 % 23 km/h 0.0 mm Moderate 16
3 Aug 33.1 °C 49 % 19 km/h 0.1 mm Moderate 18
4 Aug 35.7 °C 42 % 24 km/h 0.5 mm Moderate 20
5 Aug 25.7 °C 74 % 30 km/h 6.2 mm Very low 3
6 Aug 29.4 °C 60 % 23 km/h 0.3 mm Very low 3
7 Aug after 33.4 °C 49 % 22 km/h 0.1 mm Low 9
8 Aug after 34.1 °C 47 % 21 km/h 0.1 mm Moderate 13
9 Aug after 33.9 °C 50 % 33 km/h 1.7 mm High 23

Its twins: fires that started in the same weather

It started with an FWI of 23.8, a minimum humidity of 36% and 4 days without rain. Fires in the area that started in weather like this since 2016: 34.

FWI at the start 23.8
Minimum humidity 36 %
Days without rain 4
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Porto Velho fire, September 2022
3,734 ha 4 days FWI 24.7 Min. humidity 34 % 4 km away, in 2022

First rain (1 mm or more) after it ended: 1.8 mm on 11 Sept.

What happened to them

12 days
median duration
4,298 ha
median area
3 %
went past 10,000 ha
2.4 mm
rain at the end (median; 29 of 34 had it)

It burned an area similar to its twins (4,464 ha against a median of 4,298 ha) and lasted 17 days, against 12 days.

In 5 of 34, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.4 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

1.7 mmfirst rain
9 Aug3 days after it ended
35km/h · max. gust

It was considered over on 6 Aug, and on 9 Aug 1.7 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 29 of 34, with a median of 2.4 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 14 Jul 2018
After · 13 Aug 2018

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 287Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Brazil

Frequently asked questions

How long did the Porto Velho fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 21 July 2018 to 6 August 2018 (17 days). The perimeter dates it from 21 July 2018 to 30 July 2018.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 4,464 hectares (44.6 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Porto Velho (4,500 ha, 0.1 %).
What was the weather like?
During the fire the temperature reached 35.7 °C, humidity dropped to 30 % and gusts hit 35 km/h. The fire danger index (FWI) reached 28, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Brazil (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 34. Their median duration was 12 days and their median area 4,298 ha; 3 % went past 10,000 ha. In 5 of 34, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.4 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 193 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 30 July 2018 → 6 August 2018.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 193.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 21 July 2018 to 30 July 2018. 287 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.