Skip to content
worldfires
BR · Brazil · –

Portel fire, 4 September 2020 Portel

Out · last detection 24 Sept 2020, 04:13 UTC

The fire started on 4 September 2020 in Portel, Brazil, and satellites saw it burning for 21 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 4,306 hectares from heat detections, spread across a single municipality.

It is the 545th largest in Pará since 2016 (of 957 with a page). Number 597 in Brazil in 2020, of 957.

Compare with…
Burnt area
4,306ha
GWIS perimeter (Copernicus)
Duration
21days
4 Sept 2020 – 24 Sept 2020
Municipalities hit
1
municipalities
Started on
4 Sept
2020
Heat detections
437
in a single hotspot: 99 MW
Danger at start
24
High · FWI index
Average daily power
235MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 4 Sept24 Sept
24 Sept 2020

How it evolved, day by day

7 Sept 2020 · 180 MW · 18 8 Sept 2020 · 113 MW · 19 9 Sept 2020 · 36 MW · 5 10 Sept 2020 · 7 MW · 2 11 Sept 2020 · 20 MW · 5 12 Sept 2020 · 363 MW · 29 13 Sept 2020 · 478 MW · 70 14 Sept 2020 · 1,027 MW · 69 15 Sept 2020 · 571 MW · 50 16 Sept 2020 · 925 MW · 68 17 Sept 2020 · 122 MW · 44 18 Sept 2020 · 129 MW · 24 19 Sept 2020 · 2 MW · 1 20 Sept 2020 · 103 MW · 5 21 Sept 2020 · 26 MW · 8 22 Sept 2020 · 27 MW · 2 23 Sept 2020 · 88 MW · 15 24 Sept 2020 · 5 MW · 3
7 Sept 11 Sept 14 Sept 19 Sept 23 Sept

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

36°high
42km/h · peak gust
32%lowest humidity

It had gone 6 days without rain (1 mm or more) when it started.

This area had burned before

82% of the perimeter overlaps earlier fires recorded since 2016: 2,139 ha in 2016, 1,342 ha in 2017, 5,013 ha in 2018, 1,221 ha in 2019. Part of it burned more than once, so the yearly figures add up to more than the 3,527 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 2.7% of the area of London (43 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Portel 62,503 inhabitants where it started
    4,337 ha reached on 7 Sept
    0.2 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents≈ 20

Inside the perimeter there were about 0.06 hectares of built-up land and about 20 residents (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
4 Sept 34.8 °C 39 % 27 km/h 0.0 mm High 24
5 Sept 36.5 °C 35 % 30 km/h 0.0 mm High 24
6 Sept 35.4 °C 38 % 35 km/h 0.0 mm High 25
7 Sept 35.5 °C 39 % 27 km/h 0.0 mm High 26
8 Sept 35.8 °C 39 % 29 km/h 0.0 mm High 27
9 Sept 35.4 °C 46 % 38 km/h 0.0 mm High 24
10 Sept 35.3 °C 40 % 42 km/h 0.0 mm High 24
11 Sept 34.4 °C 44 % 35 km/h 0.0 mm High 25
12 Sept 34.8 °C 49 % 38 km/h 0.4 mm High 24
13 Sept 34.1 °C 44 % 29 km/h 0.2 mm High 23
14 Sept 35.0 °C 39 % 36 km/h 0.0 mm High 23
15 Sept 35.9 °C 32 % 34 km/h 0.0 mm High 29
16 Sept 35.9 °C 33 % 28 km/h 0.0 mm High 30
17 Sept 35.6 °C 41 % 36 km/h 0.1 mm High 29
18 Sept 33.9 °C 50 % 30 km/h 0.7 mm Moderate 20
19 Sept 35.5 °C 44 % 32 km/h 0.2 mm High 24
20 Sept 35.1 °C 46 % 33 km/h 0.0 mm High 25
21 Sept 34.0 °C 51 % 32 km/h 0.7 mm Moderate 20
22 Sept 33.5 °C 55 % 34 km/h 0.2 mm High 21
23 Sept 34.4 °C 48 % 36 km/h 0.2 mm Moderate 21
24 Sept 34.1 °C 52 % 30 km/h 0.0 mm High 22
25 Sept after 32.2 °C 58 % 34 km/h 0.6 mm Moderate 19
26 Sept after 33.3 °C 49 % 32 km/h 0.6 mm Moderate 19
27 Sept after 33.6 °C 52 % 26 km/h 0.2 mm Moderate 20
28 Sept after 33.9 °C 54 % 32 km/h 0.8 mm Moderate 21
29 Sept after 34.2 °C 45 % 31 km/h 0.0 mm High 24
30 Sept after 33.0 °C 54 % 37 km/h 0.2 mm High 25
1 Oct after 32.8 °C 54 % 34 km/h 0.6 mm Moderate 20
2 Oct after 34.4 °C 49 % 30 km/h 0.0 mm High 22
3 Oct after 34.7 °C 50 % 30 km/h 0.2 mm High 22
4 Oct after 34.0 °C 48 % 28 km/h 0.0 mm High 23

Its twins: fires that started in the same weather

It started with an FWI of 24.4, a minimum humidity of 39% and 6 days without rain. Fires in the area that started in weather like this since 2016: 27.

FWI at the start 24.4
Minimum humidity 39 %
Days without rain 6
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Portel fire, September 2022
6,957 ha 35 days FWI 25.0 Min. humidity 39 % 19 km away, in 2022

First rain (1 mm or more) after it ended: 6.9 mm on 25 Oct.

What happened to them

19 days
median duration
3,479 ha
median area
4 %
went past 10,000 ha
2.6 mm
rain at the end (median; 24 of 27 had it)

It burned an area similar to its twins (4,306 ha against a median of 3,479 ha) and lasted 21 days, against 19 days.

In 3 of 27, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.6 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
42km/h · max. gust

It was considered over on 24 Sept, and not even 1 mm fell in the following ten days: it went out without rain. Twins with rain when they ended: 24 of 27, with a median of 2.6 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 28 Aug 2020
After · 1 Oct 2020

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 437Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Brazil

Frequently asked questions

How long did the Portel fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 4 September 2020 to 24 September 2020 (21 days). The perimeter dates it from 11 September 2020 to 18 September 2020.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 4,306 hectares (43.1 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Portel (4,337 ha, 0.2 %).
What was the weather like?
During the fire the temperature reached 36.5 °C, humidity dropped to 32 % and gusts hit 42 km/h. The fire danger index (FWI) reached 30, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Brazil (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 27. Their median duration was 19 days and their median area 3,479 ha; 4 % went past 10,000 ha. In 3 of 27, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.6 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 193 · Emergency number and official warnings

Satellite cross-check

History of this page · 2 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 18 September 2020 → 24 September 2020.
  2. Start date: 11 September 2020 → 4 September 2020.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 193.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 11 September 2020 to 18 September 2020. 437 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.