Skip to content
worldfires
BR · Brazil · –

Ponte Alta do Tocantins fire, 19 September 2021 Ponte Alta do Tocantins

Out · last detection 24 Sept 2021, 16:06 UTC

The fire started on 19 September 2021 in Ponte Alta do Tocantins, Brazil, and satellites saw it burning for 6 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 4,192 hectares from heat detections, spread across a single municipality.

It is the 638th largest in Tocantins since 2016 (of 1036 with a page). Number 508 in Brazil in 2021, of 814.

Burnt area
4,192ha
GWIS perimeter (Copernicus)
Duration
6days
19 Sept 2021 – 24 Sept 2021
Municipalities hit
1
municipalities
Started on
19 Sept
2021
Heat detections
168
in a single hotspot: 32 MW
Danger at start
62
Extreme · FWI index
Average daily power
146MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 19 Sept24 Sept
24 Sept 2021

How it evolved, day by day

19 Sept 2021 · 4 MW · 1 20 Sept 2021 · 87 MW · 18 21 Sept 2021 · 397 MW · 84 22 Sept 2021 · 292 MW · 42 23 Sept 2021 · 68 MW · 20 24 Sept 2021 · 27 MW · 3
19 Sept 21 Sept 23 Sept

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

40°high
44km/h · peak gust
9%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started. Rain came after the fire: 2.2 mm on 25 Sept.

This area had burned before

80% of the perimeter overlaps earlier fires recorded since 2016: 2,835 ha in 2016, 1,669 ha in 2019, 20 ha in 2020. Part of it burned more than once, so the yearly figures add up to more than the 3,359 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 2.6% of the area of London (42 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Ponte Alta do Tocantins 7,586 inhabitants where it started
    4,221 ha reached on 19 Sept
    0.6 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Extreme FWI: 46 % of the area in Brazil Very dry air: 6.4 % of the area in Brazil 60 days without rain: 55 % of the area in Brazil

Day High Min. humidity Peak gust Rain Danger (FWI)
19 Sept 38.3 °C 14 % 33 km/h 0.0 mm Extreme 62
20 Sept 39.7 °C 9 % 31 km/h 0.0 mm Extreme 66
21 Sept 37.9 °C 18 % 44 km/h 0.0 mm Very extreme 75
22 Sept 39.3 °C 20 % 26 km/h 0.0 mm Extreme 54
23 Sept 35.2 °C 38 % 40 km/h 0.5 mm High 36
24 Sept 34.9 °C 33 % 30 km/h 0.0 mm High 37
25 Sept after 32.2 °C 43 % 26 km/h 2.2 mm High 31

Its twins: fires that started in the same weather

It started with an FWI of 62.5, a minimum humidity of 14% and more than two months without rain. Fires in the area that started in weather like this since 2016: 36.

FWI at the start 62.5
Minimum humidity 14 %
Days without rain 60+
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Monte do Carmo fire, October 2020
4,350 ha 6 days FWI 63.0 Min. humidity 14 % 38 km away, in 2020

First rain (1 mm or more) after it ended: 3.6 mm on 10 Oct.

What happened to them

8 days
median duration
4,441 ha
median area
11 %
went past 10,000 ha
3.8 mm
rain at the end (median; 17 of 36 had it)

It burned an area similar to its twins (4,192 ha against a median of 4,441 ha) and lasted 6 days, against 8 days.

In 19 of 36, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.8 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

2.2 mmfirst rain
25 Septthe day after it ended
44km/h · max. gust

It was considered over on 24 Sept, and on 25 Sept 2.2 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 17 of 36, with a median of 3.8 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 12 Sept 2021
After · 1 Oct 2021

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 168Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Brazil

Frequently asked questions

How long did the Ponte Alta do Tocantins fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 19 September 2021 to 24 September 2021 (6 days). The perimeter dates it from 20 September 2021 to 23 September 2021.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 4,192 hectares (41.9 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Ponte Alta do Tocantins (4,221 ha, 0.6 %).
What was the weather like?
During the fire the temperature reached 39.7 °C, humidity dropped to 9 % and gusts hit 44 km/h. The fire danger index (FWI) reached 75, class Very extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Brazil (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 36. Their median duration was 8 days and their median area 4,441 ha; 11 % went past 10,000 ha. In 19 of 36, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.8 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 193 · Emergency number and official warnings

Satellite cross-check

History of this page · 2 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 23 September 2021 → 24 September 2021.
  2. Start date: 20 September 2021 → 19 September 2021.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 193.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 20 September 2021 to 23 September 2021. 168 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.