Skip to content
worldfires
ME · Montenegro · –

Podgorica Municipality fire, 25 July 2020 Podgorica Municipality, Danilovgrad Municipality

Out · last detection

The fire started on in Podgorica Municipality, Montenegro, and satellites saw it burning for 7 days. Copernicus mapped a burnt perimeter of 783 hectares from satellite imagery, spread across 2 municipalities.

Number 11 in Montenegro in 2020, of 106.

The power measured by the satellite is low (9.3 MW in the strongest hotspot), more typical of grass or stubble burning, or a slow surface fire, than of a large crown fire.

Burnt area
783ha
Copernicus perimeter
Duration
7days
25 Jul 2020 – 31 Jul 2020
Municipalities hit
2
municipalities
Started on
25 Jul
2020
Heat detections
20
in a single hotspot: 9 MW
Danger at start
10
Low · FWI index
Average daily power
20MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 25 Jul31 Jul
31 Jul 2020

How it evolved, day by day

25 Jul 2020 · 19 MW · 2 27 Jul 2020 · 37 MW · 6 28 Jul 2020 · 40 MW · 10 30 Jul 2020 · 3 MW · 1 31 Jul 2020 · 1 MW · 1
25 Jul 27 Jul 28 Jul 30 Jul 31 Jul

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

37°high
37km/h · peak gust
26%lowest humidity

It had gone 0 days without rain (1 mm or more) when it started. Rain came after the fire: 18.1 mm on 4 Aug.

This area had burned before

0% of the perimeter overlaps earlier fires recorded since 2016: 2 ha in 2017.

How big is it?

10 km
It burned the equivalent of 0.5% of the area of London (7.8 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Podgorica Municipality where it started
    766 ha reached on 25 Jul
    0.5 %
  2. 18 ha
    0.0 %

Burnt area inside each municipality, from crossing the official perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

What burned

  • Other natural land45 %
  • Scrub and transitional woodland39 %
  • Broadleaved forest14 %
  • Artificial surfaces1.4 %

Land cover inside the perimeter according to Corine Land Cover, as reported by Copernicus.

People and buildings inside the perimeter

GHSL 2020
Built-up area0.93 ha
Residents≈ 70

Inside the perimeter there were about 0.93 hectares of built-up land and about 70 residents (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
25 Jul 29.1 °C 54 % 37 km/h 3.5 mm Low 10
26 Jul 30.2 °C 49 % 22 km/h 0.1 mm Very low 4
27 Jul 33.5 °C 35 % 24 km/h 0.0 mm Moderate 17
28 Jul 35.1 °C 26 % 24 km/h 0.0 mm High 26
29 Jul 35.3 °C 40 % 23 km/h 0.0 mm High 28
30 Jul 36.6 °C 36 % 23 km/h 0.0 mm High 29
31 Jul 34.8 °C 48 % 25 km/h 1.8 mm High 27
1 Aug after 35.1 °C 34 % 32 km/h 0.0 mm Moderate 18
2 Aug after 34.4 °C 27 % 28 km/h 0.0 mm High 28
3 Aug after 32.8 °C 37 % 36 km/h 0.0 mm High 34
4 Aug after 29.7 °C 56 % 43 km/h 18.1 mm Moderate 18

Its twins: fires that started in the same weather

It started with an FWI of 10.3, a minimum humidity of 54% and rain the day before. Fires in the area that started in weather like this since 2016: 21.

FWI at the start 10.3
Minimum humidity 54 %
Days without rain 0
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Općina Dubrovačko primorje fire, July 2016
288 ha 2 days FWI 10.8 Min. humidity 55 % 114 km away, in 2016

First rain (1 mm or more) after it ended: 6.6 mm on 6 Aug.

What happened to them

3 days
median duration
189 ha
median area
5 %
went past 1,000 ha
2.8 mm
rain at the end (median; 20 of 21 had it)

It was 4.1 times larger than the median of its twins and lasted 7 days, against 3 days.

Only 1 of its 21 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 1 of 21, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.8 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

18.1 mmfirst rain
4 Aug4 days after it ended
37km/h · max. gust

It was considered over on 31 Jul, and on 4 Aug 18.1 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 20 of 21, with a median of 2.8 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 18 Jul 2020
After · 7 Aug 2020

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 20Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Montenegro

Frequently asked questions

How long did the Podgorica Municipality fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 25 July 2020 to 31 July 2020 (7 days). The perimeter dates it from 27 July 2020 to 28 July 2020.
How much area did it burn?
The perimeter Copernicus measured from satellite imagery is 783 hectares (7.8 km²). Official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Podgorica Municipality (766 ha, 0.5 %); Danilovgrad Municipality (18 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 36.6 °C, humidity dropped to 26 % and gusts hit 37 km/h. The fire danger index (FWI) reached 29, class High.
Where does this data come from?
From the EFFIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Montenegro (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 21. Their median duration was 3 days and their median area 189 ha; 5 % went past 1,000 ha. Only 1 of its 21 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 1 of 21, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.8 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · 123 · Emergency number and official warnings

Satellite cross-check

History of this page · 2 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 28 July 2020 → 31 July 2020.
  2. Start date: 27 July 2020 → 25 July 2020.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112 · 123.

How we know this
  • Perimeter: EFFIS (Copernicus), mapped on satellite imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 27 July 2020 to 28 July 2020. 20 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter and land cover come from the Copernicus European Forest Fire Information System (EFFIS), measured on MODIS and Sentinel-2 imagery and published under CC BY 4.0. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM1 (Open Data Commons Open Database License 1.0). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ slightly from each country’s official figure.