Skip to content
worldfires
BR · Brazil · –

Pilão Arcado fire, 29 September 2023 Pilão Arcado

Out · last detection

The fire started on in Pilão Arcado, Brazil, and satellites saw it burning for 10 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 5,897 hectares from heat detections, spread across a single municipality.

It is number 165 by size of the 386 fires with a page that started in Bahia since 2016. Number 130 in Brazil in 2023, of 430.

Compare with…
Burnt area
5,897ha
GWIS perimeter (Copernicus)
Duration
10days
29 Sept 2023 – 8 Oct 2023
Municipalities hit
1
municipalities
Started on
29 Sept
2023
Heat detections
229
in a single hotspot: 794 MW
Danger at start
62
Extreme · FWI index
Average daily power
792MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 29 Sept8 Oct
8 Oct 2023

How it evolved, day by day

29 Sept 2023 · 269 MW · 8 30 Sept 2023 · 1,640 MW · 4 1 Oct 2023 · 1,421 MW · 14 2 Oct 2023 · 2,470 MW · 123 3 Oct 2023 · 30 MW · 13 4 Oct 2023 · 1,049 MW · 58 5 Oct 2023 · 92 MW · 3 6 Oct 2023 · 156 MW · 5 8 Oct 2023 · 5 MW · 1
29 Sept 2 Oct 5 Oct 8 Oct

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

40°high
45km/h · peak gust
11%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started.

This area had burned before

6% of the perimeter overlaps earlier fires recorded since 2016: 370 ha in 2020.

How big is it?

10 km
It burned the equivalent of 3.7% of the area of London (59 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Pilão Arcado 35,357 inhabitants where it started
    5,940 ha reached on 29 Sept
    0.5 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Extreme FWI: 46 % of the area in Brazil Very dry air: 6.4 % of the area in Brazil 60 days without rain: 55 % of the area in Brazil

Day High Min. humidity Peak gust Rain Danger (FWI)
29 Sept 39.7 °C 13 % 41 km/h 0.0 mm Extreme 62
30 Sept 38.4 °C 11 % 45 km/h 0.0 mm Extreme 65
1 Oct 38.3 °C 13 % 42 km/h 0.0 mm Extreme 61
2 Oct 39.0 °C 17 % 36 km/h 0.0 mm Extreme 59
3 Oct 38.8 °C 19 % 39 km/h 0.0 mm Extreme 67
4 Oct 37.5 °C 24 % 43 km/h 0.0 mm Extreme 68
5 Oct 38.1 °C 24 % 34 km/h 0.0 mm Extreme 62
6 Oct 37.7 °C 24 % 38 km/h 0.0 mm Extreme 62
7 Oct 37.8 °C 20 % 38 km/h 0.0 mm Extreme 56
8 Oct 39.0 °C 19 % 38 km/h 0.0 mm Extreme 60
9 Oct after 38.8 °C 19 % 42 km/h 0.0 mm Extreme 59
10 Oct after 38.8 °C 20 % 42 km/h 0.0 mm Extreme 58
11 Oct after 38.1 °C 12 % 44 km/h 0.0 mm Extreme 59
12 Oct after 37.8 °C 18 % 40 km/h 0.0 mm Extreme 52
13 Oct after 38.9 °C 16 % 34 km/h 0.0 mm Extreme 50
14 Oct after 38.8 °C 21 % 46 km/h 0.0 mm Extreme 51
15 Oct after 37.2 °C 19 % 45 km/h 0.0 mm Extreme 62
16 Oct after 36.9 °C 15 % 46 km/h 0.0 mm Extreme 68
17 Oct after 36.7 °C 12 % 41 km/h 0.0 mm Extreme 66
18 Oct after 37.7 °C 12 % 40 km/h 0.0 mm Extreme 62

Its twins: fires that started in the same weather

It started with an FWI of 62.0, a minimum humidity of 13% and more than two months without rain. Fires in the area that started in weather like this since 2016: 40.

FWI at the start 62.0
Minimum humidity 13 %
Days without rain 60+
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Barra fire, October 2023
12,689 ha 10 days FWI 60.2 Min. humidity 13 % 113 km away, in 2023

First rain (1 mm or more) after it ended: 1.3 mm on 26 Oct.

What happened to them

14 days
median duration
6,226 ha
median area
35 %
went past 10,000 ha
2.4 mm
rain at the end (median; 21 of 40 had it)

It burned an area similar to its twins (5,897 ha against a median of 6,226 ha) and lasted 10 days, against 14 days.

In 19 of 40, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.4 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
45km/h · max. gust

It was considered over on 8 Oct, and not even 1 mm fell in the following ten days: it went out without rain. Twins with rain when they ended: 21 of 40, with a median of 2.4 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 22 Sept 2023
After · 15 Oct 2023

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 28 September 2023 the air beside the fire reached 19 µg/m³ of PM2.5, but no daily average passed the WHO guideline (15).

PM2.5 peak19 µg/m³
Days over the guideline0 days
PM1027 µg/m³
Optical depth0.44
27 Sept30 Sept3 Oct6 Oct9 Oct
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 229Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Brazil

Frequently asked questions

How long did the Pilão Arcado fire last?
GWIS (Copernicus) dates it between 29 September 2023 and 8 October 2023: 10 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 5,897 hectares (59.0 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Pilão Arcado (5,940 ha, 0.5 %).
What was the weather like?
During the fire the temperature reached 39.7 °C, humidity dropped to 11 % and gusts hit 45 km/h. The fire danger index (FWI) reached 68, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Brazil (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 40. Their median duration was 14 days and their median area 6,226 ha; 35 % went past 10,000 ha. In 19 of 40, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.4 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 193 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 193.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 229 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.