Skip to content
worldfires
BR · Brazil · –

Palmeirais fire, 25 September 2025 Palmeirais, Parnarama

Out · last detection 5 Oct 2025, 16:10 UTC

The fire started on 25 September 2025 in Palmeirais, Brazil, and satellites saw it burning for 11 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 3,429 hectares from heat detections, spread across 2 municipalities.

It is the 534th largest in Piaui since 2016 (of 665 with a page). Number 443 in Brazil in 2025, of 526.

Burnt area
3,429ha
GWIS perimeter (Copernicus)
Duration
11days
25 Sept 2025 – 5 Oct 2025
Municipalities hit
2
municipalities
Started on
25 Sept
2025
Heat detections
64
in a single hotspot: 36 MW
Danger at start
49
Very high · FWI index
Average daily power
63MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 25 Sept5 Oct
5 Oct 2025

How it evolved, day by day

25 Sept 2025 · 4 MW · 1 26 Sept 2025 · 136 MW · 6 27 Sept 2025 · 220 MW · 19 28 Sept 2025 · 91 MW · 13 29 Sept 2025 · 34 MW · 8 30 Sept 2025 · 16 MW · 4 3 Oct 2025 · 4 MW · 2 4 Oct 2025 · 51 MW · 7 5 Oct 2025 · 13 MW · 4
25 Sept 27 Sept 29 Sept 3 Oct 5 Oct

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

37°high
44km/h · peak gust
21%lowest humidity

It had gone 42 days without rain (1 mm or more) when it started.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 2.2% of the area of London (34 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Palmeirais 13,264 inhabitants where it started
    3,450 ha reached on 25 Sept
    2.3 %
  2. Parnarama 31,250 inhabitants
    1 ha
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area5.7 ha
Residents≈ 650

Inside the perimeter there were about 5.7 hectares of built-up land and about 650 residents (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
25 Sept 36.8 °C 28 % 44 km/h 0.0 mm Very high 49
26 Sept 36.5 °C 29 % 40 km/h 0.0 mm Very high 48
27 Sept 36.1 °C 28 % 38 km/h 0.0 mm Very high 50
28 Sept 35.9 °C 28 % 41 km/h 0.0 mm Very high 49
29 Sept 36.0 °C 33 % 39 km/h 0.0 mm Very high 48
30 Sept 37.1 °C 28 % 39 km/h 0.0 mm Very high 48
1 Oct 36.5 °C 31 % 36 km/h 0.0 mm Very high 47
2 Oct 37.0 °C 30 % 38 km/h 0.0 mm Very high 48
3 Oct 36.1 °C 27 % 39 km/h 0.0 mm Extreme 51
4 Oct 36.9 °C 21 % 39 km/h 0.0 mm Extreme 51
5 Oct 36.9 °C 26 % 40 km/h 0.0 mm Extreme 52
6 Oct after 37.0 °C 30 % 40 km/h 0.0 mm Very high 49
7 Oct after 37.6 °C 29 % 31 km/h 0.0 mm Very high 43
8 Oct after 37.5 °C 29 % 37 km/h 0.0 mm Very high 48
9 Oct after 37.3 °C 31 % 35 km/h 0.1 mm Very high 49
10 Oct after 38.1 °C 28 % 36 km/h 0.0 mm Very high 48
11 Oct after 38.0 °C 23 % 26 km/h 0.0 mm Very high 42
12 Oct after 37.8 °C 26 % 30 km/h 0.0 mm Very high 44
13 Oct after 37.6 °C 28 % 30 km/h 0.0 mm Very high 45
14 Oct after 38.2 °C 22 % 33 km/h 0.0 mm Extreme 51
15 Oct after 38.4 °C 23 % 34 km/h 0.0 mm Extreme 52

Its twins: fires that started in the same weather

It started with an FWI of 49.4, a minimum humidity of 28% and 42 days without rain. Fires in the area that started in weather like this since 2016: 31.

FWI at the start 49.4
Minimum humidity 28 %
Days without rain 42
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

São João dos Patos fire, September 2024
7,146 ha 17 days FWI 49.1 Min. humidity 27 % 113 km away, in 2024

First rain (1 mm or more) after it ended: none in the following ten days.

What happened to them

16 days
median duration
4,478 ha
median area
13 %
went past 10,000 ha
3.0 mm
rain at the end (median; 6 of 31 had it)

It burned an area similar to its twins (3,429 ha against a median of 4,478 ha) and lasted 11 days, against 16 days.

In 25 of 31, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.0 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
44km/h · max. gust

It was considered over on 5 Oct, and not even 1 mm fell in the following ten days: it went out without rain. Twins with rain when they ended: 6 of 31, with a median of 3.0 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 18 Sept 2025
After · 12 Oct 2025

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 6 October 2025 the air beside the fire reached 94 µg/m³ of PM2.5. That day averaged 50: 3.3 times the WHO daily guideline (15).

PM2.5 peak94 µg/m³
Days over the guideline4 days
PM1096 µg/m³
Optical depth0.88
23 Sept27 Sept1 Oct5 Oct
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 64Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Brazil

Frequently asked questions

How long did the Palmeirais fire last?
GWIS (Copernicus) dates it between 25 September 2025 and 5 October 2025: 11 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 3,429 hectares (34.3 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Palmeirais (3,450 ha, 2.3 %); Parnarama (1 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 37.1 °C, humidity dropped to 21 % and gusts hit 44 km/h. The fire danger index (FWI) reached 52, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Brazil (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 31. Their median duration was 16 days and their median area 4,478 ha; 13 % went past 10,000 ha. In 25 of 31, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.0 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 193 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 193.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 64 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.