Skip to content
worldfires
IT · Italy ·

Palma di Montechiaro fire, July 2018 Licata, Palma di Montechiaro, Camastra

Out · last detection 12 Jul 2018, 11:52 UTC

The fire started on 12 July 2018 in Palma di Montechiaro, Italy, and satellites saw it burning for 1 day. Copernicus mapped a burnt perimeter of 306 hectares from satellite imagery, spread across 3 municipalities.

It is the 71th largest in Agrigento since 2016 (of 289 with a page). Number 9 in Italy in 2018, of 29.

The power measured by the satellite is low (5.4 MW in the strongest hotspot), more typical of grass or stubble burning, or a slow surface fire, than of a large crown fire.

Burnt area
306ha
Copernicus perimeter
Duration
1day
12 Jul 2018 – 12 Jul 2018
Municipalities hit
3
municipalities
Started on
12 Jul
2018
Heat detections
2
in a single hotspot: 5 MW
Danger at start
36
High · FWI index
Average daily power
10MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 12 Jul12 Jul

How it evolved, day by day

12 Jul 2018 · 10 MW · 2

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

33°high
36km/h · peak gust
31%lowest humidity

It had gone 16 days without rain (1 mm or more) when it started.

This area had burned before

82% of the perimeter overlaps earlier fires recorded since 2016: 134 ha in 2016, 215 ha in 2017. Part of it burned more than once, so the yearly figures add up to more than the 252 ha that had burned before.

What happened to each town

  1. Licata 34,287 inhabitants · 15.2 km from the centre
    205 ha
    1.1 %
  2. Palma di Montechiaro 21,373 inhabitants · 3.8 km from the centre where it started
    99 ha reached on 12 Jul
    1.3 %
  3. Camastra 2,010 inhabitants · 3.7 km from the centre
    3 ha
    0.2 %

Burnt area inside each municipality, from crossing the official perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

What burned

  • Other natural land56 %
  • Agricultural areas44 %

Land cover inside the perimeter according to Corine Land Cover, as reported by Copernicus.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
12 Jul 33.2 °C 31 % 36 km/h 0.0 mm High 36
13 Jul after 33.8 °C 28 % 36 km/h 0.0 mm Very high 41
14 Jul after 34.0 °C 25 % 37 km/h 0.0 mm Very high 47
15 Jul after 33.3 °C 45 % 43 km/h 0.0 mm High 38
16 Jul after 33.6 °C 34 % 39 km/h 0.0 mm Very high 40
17 Jul after 31.1 °C 38 % 56 km/h 0.0 mm Extreme 57
18 Jul after 32.9 °C 33 % 37 km/h 0.0 mm High 38
19 Jul after 31.0 °C 35 % 31 km/h 0.0 mm Very high 42
20 Jul after 33.0 °C 27 % 39 km/h 0.0 mm Very high 42
21 Jul after 31.5 °C 31 % 31 km/h 0.0 mm Very high 44
22 Jul after 33.0 °C 41 % 34 km/h 0.0 mm Very high 39

Its twins: fires that started in the same weather

It started with an FWI of 36.5, a minimum humidity of 31% and 16 days without rain. Fires in the area that started in weather like this since 2016: 20.

FWI at the start 36.5
Minimum humidity 31 %
Days without rain 16
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Ravanusa fire, June 2024
129 ha 3 days FWI 36.9 Min. humidity 31 % 17 km away, in 2024

First rain (1 mm or more) after it ended: none in the following ten days.

What happened to them

2 days
median duration
192 ha
median area
0 %
went past 1,000 ha
1.9 mm
rain at the end (median; 8 of 20 had it)

It was 1.6 times larger than the median of its twins and lasted 1 day, against 2 days.

Only 3 of its 20 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 12 of 20, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 1.9 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
36km/h · max. gust

It was considered over on 12 Jul, and not even 1 mm fell in the following ten days: it went out without rain. Twins with rain when they ended: 8 of 20, with a median of 1.9 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 5 Jul 2018
After · 19 Jul 2018

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 2Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Italy

Frequently asked questions

How long did the Palma di Montechiaro fire last?
Copernicus dates it between 12 July 2018 and 12 July 2018: 1 day between the first and last image with fire.
How much area did it burn?
The perimeter Copernicus measured from satellite imagery is 306 hectares (3.1 km²). Official national figures may differ.
Which municipalities burned?
The fire entered 3 municipalities: Licata (205 ha, 1.1 %); Palma di Montechiaro (99 ha, 1.3 %); Camastra (3 ha, 0.2 %).
Did the fire reach a town?
The fire came within 3.7 km of the centre of Camastra, the closest of the areas it touched. That is the distance from the perimeter, or the nearest hotspot, to the point marking the centre; it does not mean it entered the houses.
What was the weather like?
During the fire the temperature reached 33.2 °C, humidity dropped to 31 % and gusts hit 36 km/h. The fire danger index (FWI) reached 36, class High.
Where does this data come from?
From the EFFIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Italy (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 20. Their median duration was 2 days and their median area 192 ha; 0 % went past 1,000 ha. Only 3 of its 20 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 12 of 20, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 1.9 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · 1515 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112 · 1515.

How we know this
  • Perimeter: EFFIS (Copernicus), mapped on satellite imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 2 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter and land cover come from the Copernicus European Forest Fire Information System (EFFIS), measured on MODIS and Sentinel-2 imagery and published under CC BY 4.0. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM4 (Creative Commons Attribution 3.0 License). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ slightly from each country’s official figure.