Skip to content
worldfires
IT · Italy · –

Santa Elisabetta fire, July 2026 Sant'Angelo Muxaro, Santa Elisabetta, Cattolica Eraclea

Out · last detection 23 Jul 2026, 00:50 UTC

The fire started on 12 July 2026 in Santa Elisabetta, Italy, and satellites saw it burning for 12 days. Copernicus mapped a burnt perimeter of 1,330 hectares from satellite imagery, spread across 5 municipalities.

It is the 5th largest in Agrigento since 2016 (of 289 with a page). Number 16 in Italy in 2026, of 232.

Burnt area
1,330ha
Copernicus perimeter
Duration
≈ 12days
12 Jul 2026 – 23 Jul 2026
Municipalities hit
5
municipalities
Started on
12 Jul
2026
Heat detections
48
in a single hotspot: 38 MW
Danger at start
27
High · FWI index
Average daily power
47MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 12 Jul23 Jul
23 Jul 2026

How it evolved, day by day

12 Jul 2026 · 2 MW · 1 17 Jul 2026 · 47 MW · 2 19 Jul 2026 · 80 MW · 16 20 Jul 2026 · 148 MW · 26 21 Jul 2026 · 2 MW · 1 23 Jul 2026 · 3 MW · 2
12 Jul 20 Jul

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

40°high
38km/h · peak gust
21%lowest humidity

It had gone 8 days without rain (1 mm or more) when it started.

This area had burned before

82% of the perimeter overlaps earlier fires recorded since 2016: 251 ha in 2016, 21 ha in 2017, 212 ha in 2018, 220 ha in 2019, 357 ha in 2020, 417 ha in 2021, 530 ha in 2022, 411 ha in 2023, 333 ha in 2024, 795 ha in 2025. Part of it burned more than once, so the yearly figures add up to more than the 1,088 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 0.8% of the area of London (13 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Sant'Angelo Muxaro 1,152 inhabitants · 3.0 km from the centre
    612 ha reached on 19 Jul
    9.5 %
  2. Santa Elisabetta 2,182 inhabitants · 0.9 km from the centre where it started
    474 ha reached on 17 Jul
    29 %
  3. Cattolica Eraclea 3,300 inhabitants · 6.2 km from the centre
    199 ha reached on 19 Jul
    3.2 %
  4. Raffadali 12,008 inhabitants · 1.9 km from the centre
    25 ha reached on 20 Jul
    1.1 %
  5. Agrigento 55,512 inhabitants · 12.0 km from the centre
    23 ha reached on 12 Jul
    0.1 %

Burnt area inside each municipality, from crossing the official perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

What burned

  • Agricultural areas61 %
  • Other natural land29 %
  • Sclerophyllous scrub8.8 %
  • Broadleaved forest1.6 %

Land cover inside the perimeter according to Corine Land Cover, as reported by Copernicus.

People and buildings inside the perimeter

GHSL 2025
Built-up area2.7 ha
Residents< 20

Inside the perimeter there were about 2.7 hectares of built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
12 Jul 31.2 °C 45 % 34 km/h 0.0 mm High 27
13 Jul 33.2 °C 43 % 32 km/h 0.0 mm High 22
14 Jul 33.0 °C 45 % 32 km/h 0.0 mm High 27
15 Jul 33.5 °C 54 % 26 km/h 0.0 mm High 26
16 Jul 36.0 °C 38 % 30 km/h 0.0 mm High 28
17 Jul 37.8 °C 34 % 34 km/h 0.0 mm High 36
18 Jul 39.5 °C 28 % 32 km/h 0.0 mm Very high 44
19 Jul 39.2 °C 21 % 35 km/h 0.0 mm Very high 49
20 Jul 39.2 °C 24 % 35 km/h 0.0 mm Extreme 56
21 Jul 40.0 °C 22 % 34 km/h 0.0 mm Extreme 54
22 Jul 37.3 °C 29 % 38 km/h 0.0 mm Very high 40
23 Jul 33.0 °C 38 % 34 km/h 0.0 mm High 38
24 Jul after 33.1 °C 32 % 47 km/h 0.0 mm Extreme 53
25 Jul after 29.5 °C 56 % 32 km/h 0.0 mm High 27
26 Jul after 30.6 °C 49 % 46 km/h 0.0 mm High 36
27 Jul after 31.4 °C 55 % 34 km/h 0.0 mm High 28
28 Jul after 32.9 °C 52 % 32 km/h 0.4 mm High 26
29 Jul after 32.6 °C 40 % 31 km/h 0.0 mm High 31
30 Jul after 33.5 °C 39 % 31 km/h 0.0 mm High 35
31 Jul after 35.0 °C 36 % 28 km/h 0.0 mm High 35
1 Aug after 35.2 °C 36 % 22 km/h 0.0 mm High 35
2 Aug after 34.4 °C 43 % 33 km/h 0.8 mm Very high 39

Its twins: fires that started in the same weather

It started with an FWI of 27.0, a minimum humidity of 45% and 8 days without rain. Fires in the area that started in weather like this since 2016: 22.

FWI at the start 27.0
Minimum humidity 45 %
Days without rain 8
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Casteltermini fire, August 2024
181 ha 1 day FWI 28.3 Min. humidity 46 % 17 km away, in 2024

First rain (1 mm or more) after it ended: 5.7 mm on 27 Aug.

What happened to them

2 days
median duration
170 ha
median area
0 %
went past 1,000 ha
4.7 mm
rain at the end (median; 12 of 22 had it)

It was 7.8 times larger than the median of its twins and lasted 12 days, against 2 days.

None of its 22 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 10 of 22, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 4.7 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
38km/h · max. gust

It was considered over on 23 Jul, and not even 1 mm fell in the following ten days: it went out without rain. Twins with rain when they ended: 12 of 22, with a median of 4.7 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 5 Jul 2026
After · 30 Jul 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 22 July 2026 the air beside the fire reached 43 µg/m³ of PM2.5. That day averaged 27: 1.8 times the WHO daily guideline (15).

PM2.5 peak43 µg/m³
Days over the guideline3 days
PM1084 µg/m³
Optical depth0.78
15 Jul17 Jul19 Jul21 Jul
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 48Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Italy

Frequently asked questions

How long did the Santa Elisabetta fire last?
The official perimeter only gives the start date (17 July 2026). The end comes from the heat detections inside the perimeter: it burned until 23 July 2026 (12 days from 12 July 2026), the last day with detections before more than 10 days in a row without any, so it is approximate.
How much area did it burn?
The perimeter Copernicus measured from satellite imagery is 1,330 hectares (13.3 km²). Official national figures may differ.
Which municipalities burned?
The fire entered 5 municipalities: Sant'Angelo Muxaro (612 ha, 9.5 %); Santa Elisabetta (474 ha, 29 %); Cattolica Eraclea (199 ha, 3.2 %); Raffadali (25 ha, 1.1 %); Agrigento (23 ha, 0.1 %).
Did the fire reach a town?
The fire started in Santa Elisabetta and came within 0.9 km of its centre. That is the distance from the perimeter, or the nearest hotspot, to the point marking the centre; it does not mean it entered the houses.
What was the weather like?
During the fire the temperature reached 40.0 °C, humidity dropped to 21 % and gusts hit 38 km/h. The fire danger index (FWI) reached 56, class Extreme.
Where does this data come from?
From the EFFIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Italy (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 22. Their median duration was 2 days and their median area 170 ha; 0 % went past 1,000 ha. None of its 22 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 10 of 22, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 4.7 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · 1515 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Start date: 17 July 2026 → 12 July 2026.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112 · 1515.

How we know this
  • Perimeter: EFFIS (Copernicus), mapped on satellite imagery; 3 polygons grouped in this page.
  • The official perimeter has no end date: the end is the last day with VIIRS detections inside the perimeter before a gap of more than 10 days (150 days at most), so it is approximate. 48 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter and land cover come from the Copernicus European Forest Fire Information System (EFFIS), measured on MODIS and Sentinel-2 imagery and published under CC BY 4.0. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM4 (Creative Commons Attribution 3.0 License). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ slightly from each country’s official figure.