Palizada fire, February 2022 Palizada
The fire started on 24 February 2022 in Palizada, Mexico, and satellites saw it burning for 6 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 5,042 hectares from heat detections, spread across a single municipality.
It is the 13th largest in Campeche since 2016 (of 138 with a page). Number 27 in Mexico in 2022, of 232.
Compare with…
- Burnt area
- 5,042ha
- GWIS perimeter (Copernicus)
- Duration
- 6days
- 24 Feb 2022 – 1 Mar 2022
- Municipalities hit
- 1
- municipalities
- Started on
- 24 Feb
- 2022
- Heat detections
- 172
- in a single hotspot: 83 MW
- Danger at start
- 8
- Low · FWI index
- Average daily power
- 196MW
- detected power per day, on average
Where it burned
How it evolved, day by day
Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.
The weather it burned in
It had gone 4 days without rain (1 mm or more) when it started.
This area had burned before
64% of the perimeter overlaps earlier fires recorded since 2016: 1,973 ha in 2016, 6 ha in 2018, 1,679 ha in 2019. Part of it burned more than once, so the yearly figures add up to more than the 3,215 ha that had burned before.
- 1,675 ha Palizada fire, April 2019 3,988 ha in total; the hectares shown are those it shares with this fire
- 1,341 ha Palizada fire, May 2016 3,539 ha in total; the hectares shown are those it shares with this fire
- 632 ha Palizada fire, May 2016 7,887 ha in total; the hectares shown are those it shares with this fire
- 4 ha Palizada fire, April 2019 3,033 ha in total; the hectares shown are those it shares with this fire
How big is it?
London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).
Paris boundary: geoBoundaries · Institut national de l'information géographique et forestière (IGN-F) (Etalab Open License 2.0).
Madrid boundary: geoBoundaries · Open Data ESRI, IGN Central Registry of Cartography Area (CC BY 4.0).
Berlin boundary: geoBoundaries · Federal Agency for Cartography and Geodesy (dl-de/by-2-0).
This compares size, not location: both shapes are at the same scale, north up, centred on each other.
What happened to each town
-
5,075 ha reached on 24 Feb2.3 %
Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.
People and buildings inside the perimeter
GHSL 2020Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).
This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.
Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu
Official record
According to CONAFOR, this fire started on 25 February 2022 and burned 8,717 ha (the satellite measured 5,042 ha). The two figures differ a lot, so these may not be exactly the same fire: take them as nearby records.
- Palizada Ribera San Francisco 25 February 2022 8,717 ha · extinguished on 4 March 2022 · cause: negligence
CONAFOR (Comisión Nacional Forestal), estadística de incendios forestales en datos.gob.mx (CC BY 4.0). This is the agency’s consolidated statistic: it measures the area in its own way, which is why it can differ from the satellite.
The weather day by day
ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.
Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
| Day | High | Min. humidity | Peak gust | Rain | Danger (FWI) |
|---|---|---|---|---|---|
| 24 Feb | 30.7 °C | 61 % | 45 km/h | 0.0 mm | Low 8 |
| 25 Feb | 29.9 °C | 56 % | 44 km/h | 0.0 mm | Low 9 |
| 26 Feb | 28.4 °C | 61 % | 31 km/h | 0.1 mm | Low 7 |
| 27 Feb | 28.6 °C | 66 % | 33 km/h | 0.4 mm | Low 7 |
| 28 Feb | 25.6 °C | 67 % | 37 km/h | 1.1 mm | Very low 4 |
| 1 Mar | 26.1 °C | 66 % | 28 km/h | 1.1 mm | Very low 3 |
| 2 Mar after | 27.4 °C | 61 % | 39 km/h | 0.5 mm | Low 6 |
| 3 Mar after | 28.3 °C | 63 % | 33 km/h | 0.5 mm | Low 7 |
| 4 Mar after | 29.5 °C | 58 % | 31 km/h | 0.0 mm | Low 8 |
| 5 Mar after | 30.7 °C | 44 % | 38 km/h | 0.0 mm | Moderate 12 |
| 6 Mar after | 32.1 °C | 52 % | 46 km/h | 0.0 mm | Moderate 14 |
| 7 Mar after | 32.8 °C | 52 % | 41 km/h | 0.0 mm | Moderate 14 |
| 8 Mar after | 32.2 °C | 52 % | 36 km/h | 0.0 mm | Moderate 13 |
| 9 Mar after | 33.0 °C | 50 % | 34 km/h | 0.0 mm | Moderate 14 |
| 10 Mar after | 31.1 °C | 61 % | 23 km/h | 0.0 mm | Low 10 |
| 11 Mar after | 34.8 °C | 50 % | 31 km/h | 0.0 mm | Moderate 12 |
Before and after, from space
Drag the line to compare the same ground before the fire and after it.
If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.
Detections table · 172Every satellite heat detection, one by one, with time, satellite, power and coordinates.
| Date and time | Satellite | FRP (MW) | Lat | Lon |
|---|
Other fires nearby
Frequently asked questions
- How long did the Palizada fire last?
- GWIS (Copernicus) dates it between 24 February 2022 and 1 March 2022: 6 days between the first and last heat detection of the perimeter.
- How much area did it burn?
- The perimeter GWIS (Copernicus) rebuilt from heat detections is 5,042 hectares (50.4 km²). It is an estimate: official national figures may differ.
- Which municipalities burned?
- The fire only entered Palizada (5,075 ha, 2.3 %).
- What was the weather like?
- During the fire the temperature reached 30.7 °C, humidity dropped to 56 % and gusts hit 45 km/h. The fire danger index (FWI) reached 9, class Low.
- Where does this data come from?
- From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Mexico (geoBoundaries). It is not an official report.
Where to verify it
A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.
Emergency number: 911 · Emergency number and official warnings ›
Satellite cross-check
History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
No changes since 24 October 2026.
Does something look wrong on this page?
This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.
Report an error
How we know this
- Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 2 polygons grouped in this page.
- Dates from the perimeter: the VIIRS detections inside it did not change them. 172 Suomi-NPP VIIRS detections on those dates.
- Compared with CONAFOR: 8,717 official ha against 5,042 ha of perimeter; similar, but with reservations.
- Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
- Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
Where this data comes from
The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.