Skip to content
worldfires
LA · Laos · –

Paksxong fire, 8 March 2026 Paksxong, Sanamxay

Out · last detection 19 Apr 2026, 19:09 UTC

The fire started on 8 March 2026 in Paksxong, Laos, and satellites saw it burning for 43 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 7,655 hectares from heat detections, spread across 2 municipalities.

Number 57 in Laos in 2026, of 308.

GWIS near-real-time perimeter, from the layer that changed in October 2025: this fire is not compared with fires from earlier years, because since then the GWIS layer gives more and larger perimeters.

Burnt area
7,655ha
GWIS perimeter (Copernicus)
Duration
43days
8 Mar 2026 – 19 Apr 2026
Municipalities hit
2
districts
Started on
8 Mar
2026
Heat detections
273
in a single hotspot: 184 MW
Danger at start
4
Very low · FWI index
Average daily power
138MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 8 Mar19 Apr
19 Apr 2026

How it evolved, day by day

8 Mar 2026 · 14 MW · 1 9 Mar 2026 · 14 MW · 3 10 Mar 2026 · 11 MW · 2 13 Mar 2026 · 854 MW · 15 14 Mar 2026 · 783 MW · 27 15 Mar 2026 · 32 MW · 7 16 Mar 2026 · 80 MW · 4 17 Mar 2026 · 197 MW · 13 18 Mar 2026 · 288 MW · 4 19 Mar 2026 · 2 MW · 1 20 Mar 2026 · 0 MW · 1 23 Mar 2026 · 41 MW · 6 24 Mar 2026 · 41 MW · 11 25 Mar 2026 · 98 MW · 14 26 Mar 2026 · 60 MW · 8 27 Mar 2026 · 729 MW · 30 28 Mar 2026 · 369 MW · 17 29 Mar 2026 · 33 MW · 7 30 Mar 2026 · 448 MW · 14 31 Mar 2026 · 37 MW · 6 1 Apr 2026 · 99 MW · 4 2 Apr 2026 · 97 MW · 13 3 Apr 2026 · 64 MW · 9 4 Apr 2026 · 5 MW · 2 5 Apr 2026 · 5 MW · 3 6 Apr 2026 · 15 MW · 4 7 Apr 2026 · 18 MW · 6 8 Apr 2026 · 124 MW · 9 10 Apr 2026 · 45 MW · 10 11 Apr 2026 · 54 MW · 10 12 Apr 2026 · 34 MW · 8 13 Apr 2026 · 2 MW · 1 16 Apr 2026 · 8 MW · 2 19 Apr 2026 · 1 MW · 1
13 Mar 26 Mar 2 Apr 10 Apr

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

34°high
47km/h · peak gust
37%lowest humidity

It had gone one day without rain (1 mm or more) when it started. Rain came after the fire: 4.0 mm on 20 Apr.

This area had burned before

81% of the perimeter overlaps earlier fires recorded since 2016: 2,544 ha in 2019, 3,813 ha in 2020, 2,043 ha in 2021, 2,516 ha in 2022, 2,865 ha in 2023, 325 ha in 2024, 1,208 ha in 2025. Part of it burned more than once, so the yearly figures add up to more than the 6,214 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 4.8% of the area of London (77 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Paksxong where it started
    7,480 ha reached on 8 Mar
    2.2 %
  2. 217 ha
    0.1 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area1.0 ha
Residents≈ 50

Inside the perimeter there were about 1.0 hectares of built-up land and about 50 residents (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
8 Mar 30.0 °C 39 % 27 km/h 0.0 mm Very low 4
9 Mar 29.4 °C 45 % 36 km/h 0.0 mm Low 8
10 Mar 28.0 °C 50 % 47 km/h 0.1 mm Low 10
11 Mar 28.7 °C 46 % 23 km/h 0.0 mm Low 8
12 Mar 26.8 °C 56 % 23 km/h 0.7 mm Low 8
13 Mar 26.1 °C 54 % 34 km/h 1.0 mm Low 11
14 Mar 27.7 °C 49 % 34 km/h 3.4 mm Low 8
15 Mar 28.3 °C 46 % 22 km/h 0.0 mm Very low 2
16 Mar 28.4 °C 46 % 19 km/h 0.3 mm Low 5
17 Mar 28.8 °C 47 % 20 km/h 0.4 mm Low 8
18 Mar 29.7 °C 46 % 23 km/h 0.0 mm Low 8
19 Mar 29.3 °C 54 % 22 km/h 3.0 mm Low 7
20 Mar 28.0 °C 60 % 21 km/h 17.1 mm Very low 1
21 Mar 30.1 °C 51 % 19 km/h 0.4 mm Very low 0
22 Mar 31.0 °C 45 % 20 km/h 0.0 mm Very low 2
23 Mar 30.5 °C 45 % 24 km/h 0.0 mm Low 6
24 Mar 31.9 °C 42 % 19 km/h 0.0 mm Low 8
25 Mar 33.0 °C 39 % 19 km/h 0.0 mm Low 11
26 Mar 32.7 °C 40 % 20 km/h 0.0 mm Low 10
27 Mar 32.5 °C 41 % 22 km/h 0.0 mm Moderate 12
28 Mar 33.0 °C 40 % 21 km/h 0.0 mm Moderate 14
29 Mar 31.9 °C 40 % 30 km/h 0.0 mm Moderate 15
30 Mar 32.7 °C 38 % 29 km/h 0.3 mm Moderate 17
31 Mar 32.7 °C 37 % 28 km/h 0.0 mm Moderate 17
1 Apr 32.8 °C 40 % 23 km/h 0.0 mm Moderate 14
2 Apr 32.3 °C 43 % 28 km/h 0.0 mm Moderate 17
3 Apr 32.0 °C 45 % 29 km/h 0.0 mm Moderate 19
4 Apr 31.0 °C 48 % 32 km/h 0.0 mm Moderate 20
5 Apr 32.2 °C 45 % 35 km/h 0.2 mm High 21
6 Apr 33.2 °C 40 % 34 km/h 0.3 mm High 22
7 Apr 32.7 °C 42 % 33 km/h 0.0 mm High 22
8 Apr 33.7 °C 39 % 30 km/h 0.4 mm High 23
9 Apr 33.0 °C 42 % 31 km/h 0.0 mm High 24
10 Apr 32.3 °C 46 % 31 km/h 0.1 mm High 22
11 Apr 32.4 °C 43 % 35 km/h 0.1 mm High 23
12 Apr 33.5 °C 40 % 33 km/h 0.2 mm High 22
13 Apr 32.9 °C 43 % 30 km/h 0.2 mm High 23
14 Apr 33.3 °C 45 % 24 km/h 1.0 mm Moderate 19
15 Apr 31.8 °C 54 % 26 km/h 5.6 mm Moderate 14
16 Apr 30.6 °C 56 % 25 km/h 6.7 mm Very low 4
17 Apr 30.7 °C 59 % 24 km/h 4.4 mm Very low 2
18 Apr 30.6 °C 60 % 22 km/h 13.2 mm Very low 1
19 Apr 26.9 °C 73 % 23 km/h 15.2 mm Very low 0
20 Apr after 28.6 °C 71 % 27 km/h 4.0 mm Very low 0

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 1 Mar 2026
After · 26 Apr 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 28 March 2026 the air beside the fire reached 84 µg/m³ of PM2.5. That day averaged 56: 3.7 times the WHO daily guideline (15).

PM2.5 peak84 µg/m³
Days over the guideline41 days
PM1086 µg/m³
Optical depth1.93
10 Mar19 Mar28 Mar6 Apr15 Apr
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 273Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Laos

Frequently asked questions

How long did the Paksxong fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 8 March 2026 to 19 April 2026 (43 days). The perimeter dates it from 12 March 2026 to 13 April 2026.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 7,655 hectares (76.6 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Paksxong (7,480 ha, 2.2 %); Sanamxay (217 ha, 0.1 %).
What was the weather like?
During the fire the temperature reached 33.7 °C, humidity dropped to 37 % and gusts hit 47 km/h. The fire danger index (FWI) reached 24, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Laos (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Start date: 12 March 2026 → 8 March 2026.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 3 polygons grouped in this page.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 12 March 2026 to 13 April 2026. 273 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.