Skip to content
worldfires
BR · Brazil · –

Oriximiná fire, 28 September 2023 Oriximiná

Out · last detection 3 Oct 2023, 16:54 UTC

The fire started on 28 September 2023 in Oriximiná, Brazil, and satellites saw it burning for 6 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 3,006 hectares from heat detections, spread across a single municipality.

It is the 955th largest in Pará since 2016 (of 957 with a page). Number 430 in Brazil in 2023, of 430.

The power measured by the satellite is low (28.0 MW in the strongest hotspot), more typical of grass or stubble burning, or a slow surface fire, than of a large crown fire.

Burnt area
3,006ha
GWIS perimeter (Copernicus)
Duration
6days
28 Sept 2023 – 3 Oct 2023
Municipalities hit
1
municipalities
Started on
28 Sept
2023
Heat detections
97
in a single hotspot: 28 MW
Danger at start
25
High · FWI index
Average daily power
106MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 28 Sept3 Oct
3 Oct 2023

How it evolved, day by day

28 Sept 2023 · 11 MW · 3 29 Sept 2023 · 115 MW · 19 30 Sept 2023 · 59 MW · 12 1 Oct 2023 · 334 MW · 34 2 Oct 2023 · 109 MW · 25 3 Oct 2023 · 10 MW · 4
28 Sept 1 Oct

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

36°high
39km/h · peak gust
26%lowest humidity

It had gone 4 days without rain (1 mm or more) when it started.

This area had burned before

38% of the perimeter overlaps earlier fires recorded since 2016: 737 ha in 2017, 795 ha in 2022. Part of it burned more than once, so the yearly figures add up to more than the 1,128 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 1.9% of the area of London (30 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Oriximiná 20,136 inhabitants where it started
    3,027 ha reached on 28 Sept
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
28 Sept 35.4 °C 37 % 33 km/h 0.0 mm High 25
29 Sept 36.0 °C 27 % 36 km/h 0.0 mm High 33
30 Sept 36.1 °C 26 % 34 km/h 0.0 mm High 34
1 Oct 35.8 °C 28 % 29 km/h 0.0 mm High 30
2 Oct 35.2 °C 40 % 30 km/h 0.1 mm High 29
3 Oct 35.0 °C 39 % 39 km/h 0.1 mm High 37
4 Oct after 36.3 °C 30 % 35 km/h 0.0 mm High 35
5 Oct after 36.1 °C 31 % 35 km/h 0.0 mm High 32
6 Oct after 36.4 °C 29 % 30 km/h 0.0 mm High 31
7 Oct after 36.2 °C 25 % 31 km/h 0.0 mm High 31
8 Oct after 36.6 °C 30 % 35 km/h 0.0 mm High 36
9 Oct after 36.5 °C 26 % 33 km/h 0.0 mm High 35
10 Oct after 36.6 °C 28 % 32 km/h 0.0 mm High 34
11 Oct after 37.0 °C 26 % 36 km/h 0.0 mm High 36
12 Oct after 36.1 °C 31 % 36 km/h 0.0 mm High 36
13 Oct after 36.1 °C 35 % 32 km/h 0.0 mm High 35

Its twins: fires that started in the same weather

It started with an FWI of 25.2, a minimum humidity of 37% and 4 days without rain. Fires in the area that started in weather like this since 2016: 15.

FWI at the start 25.2
Minimum humidity 37 %
Days without rain 4
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Oriximiná fire, September 2022
4,338 ha 3 days FWI 24.9 Min. humidity 36 % 49 km away, in 2022

First rain (1 mm or more) after it ended: 2.5 mm on 3 Oct.

What happened to them

10 days
median duration
4,338 ha
median area
13 %
went past 10,000 ha
2.5 mm
rain at the end (median; 14 of 15 had it)

It burned an area similar to its twins (3,006 ha against a median of 4,338 ha) and lasted 6 days, against 10 days.

In 1 of 15, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.5 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
39km/h · max. gust

It was considered over on 3 Oct, and not even 1 mm fell in the following ten days: it went out without rain. Twins with rain when they ended: 14 of 15, with a median of 2.5 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 21 Sept 2023
After · 10 Oct 2023

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 1 October 2023 the air beside the fire reached 38 µg/m³ of PM2.5. That day averaged 22: 1.4 times the WHO daily guideline (15).

PM2.5 peak38 µg/m³
Days over the guideline6 days
PM1056 µg/m³
Optical depth0.45
26 Sept29 Sept2 Oct5 Oct
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 97Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Brazil

Frequently asked questions

How long did the Oriximiná fire last?
GWIS (Copernicus) dates it between 28 September 2023 and 3 October 2023: 6 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 3,006 hectares (30.1 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Oriximiná (3,027 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 36.1 °C, humidity dropped to 26 % and gusts hit 39 km/h. The fire danger index (FWI) reached 37, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Brazil (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 15. Their median duration was 10 days and their median area 4,338 ha; 13 % went past 10,000 ha. In 1 of 15, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.5 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 193 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 193.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 97 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.