Skip to content
worldfires
UA · Ukraine · –

Novoaidar fire, September 2023 Новоайдарський район · Novoaidar, Slovianoserbsk

Out · last detection 30 Sept 2023, 23:31 UTC

The fire started on 25 September 2023 in Novoaidar, Ukraine, and satellites saw it burning for 6 days. Copernicus mapped a burnt perimeter of 833 hectares from satellite imagery, spread across 2 municipalities.

It is the 87th largest in Luhansk Oblast since 2016 (of 909 with a page). Number 45 in Ukraine in 2023, of 491.

Burnt area
833ha
Copernicus perimeter
Duration
6days
25 Sept 2023 – 30 Sept 2023
Municipalities hit
2
districts
Started on
25 Sept
2023
Heat detections
104
in a single hotspot: 72 MW
Danger at start
42
Very high · FWI index
Average daily power
110MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 25 Sept30 Sept
30 Sept 2023

How it evolved, day by day

25 Sept 2023 · 51 MW · 7 26 Sept 2023 · 85 MW · 18 27 Sept 2023 · 217 MW · 14 28 Sept 2023 · 153 MW · 27 29 Sept 2023 · 133 MW · 33 30 Sept 2023 · 21 MW · 5
25 Sept 27 Sept 29 Sept

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

28°high
33km/h · peak gust
21%lowest humidity

It had gone 9 days without rain (1 mm or more) when it started. Rain came after the fire: 2.1 mm on 2 Oct.

This area had burned before

14% of the perimeter overlaps earlier fires recorded since 2016: 38 ha in 2020, 77 ha in 2022.

How big is it?

10 km
It burned the equivalent of 0.5% of the area of London (8.3 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Novoaidar Новоайдарський район 25,086 inhabitants · 15.2 km from the centre where it started
    827 ha reached on 25 Sept
    0.5 %
  2. Slovianoserbsk Слов'яносербський район 53,784 inhabitants · 14.8 km from the centre
    4 ha reached on 29 Sept
    0.0 %

Burnt area inside each municipality, from crossing the official perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

What burned

  • Coniferous forest81 %
  • Mixed forest14 %
  • Other natural land5.0 %

Land cover inside the perimeter as reported by Copernicus EFFIS (outside the Corine Land Cover area).

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
25 Sept 26.8 °C 26 % 30 km/h 0.0 mm Very high 42
26 Sept 28.4 °C 23 % 32 km/h 0.0 mm Very high 47
27 Sept 27.8 °C 21 % 33 km/h 0.0 mm Extreme 52
28 Sept 27.7 °C 26 % 30 km/h 0.0 mm Very high 48
29 Sept 26.6 °C 27 % 27 km/h 0.0 mm Very high 44
30 Sept 26.9 °C 27 % 22 km/h 0.0 mm Very high 42
1 Oct after 25.5 °C 31 % 22 km/h 0.0 mm Very high 39
2 Oct after 22.8 °C 42 % 35 km/h 2.1 mm High 28

Its twins: fires that started in the same weather

It started with an FWI of 42.5, a minimum humidity of 26% and 9 days without rain. Fires in the area that started in weather like this since 2016: 23.

FWI at the start 42.5
Minimum humidity 26 %
Days without rain 9
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Popasna fire, August 2026
159 ha 1 day FWI 42.3 Min. humidity 25 % 18 km away, in 2026

First rain (1 mm or more) after it ended: none in the following ten days.

What happened to them

1 day
median duration
184 ha
median area
0 %
went past 1,000 ha
4.3 mm
rain at the end (median; 17 of 23 had it)

It was 4.5 times larger than the median of its twins and lasted 6 days, against 1 day.

None of its 23 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 6 of 23, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 4.3 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

2.1 mmfirst rain
2 Oct2 days after it ended
33km/h · max. gust

It was considered over on 30 Sept, and on 2 Oct 2.1 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 17 of 23, with a median of 4.3 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 18 Sept 2023
After · 7 Oct 2023

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 4 October 2023 the air beside the fire reached 21 µg/m³ of PM2.5, but no daily average passed the WHO guideline (15).

PM2.5 peak21 µg/m³
Days over the guideline0 days
PM1062 µg/m³
Optical depth0.44
23 Sept26 Sept29 Sept2 Oct5 Oct
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 104Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Ukraine

Frequently asked questions

How long did the Novoaidar fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 25 September 2023 to 30 September 2023 (6 days). The perimeter dates it from 25 September 2023 to 28 September 2023.
How much area did it burn?
The perimeter Copernicus measured from satellite imagery is 833 hectares (8.3 km²). Official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Novoaidar (827 ha, 0.5 %); Slovianoserbsk (4 ha, 0.0 %).
Did the fire reach a town?
The fire came within 14.8 km of the centre of Slovianoserbsk, the closest of the areas it touched. That is the distance from the perimeter, or the nearest hotspot, to the point marking the centre; it does not mean it entered the houses.
What was the weather like?
During the fire the temperature reached 28.4 °C, humidity dropped to 21 % and gusts hit 33 km/h. The fire danger index (FWI) reached 52, class Extreme.
Where does this data come from?
From the EFFIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Ukraine (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 23. Their median duration was 1 day and their median area 184 ha; 0 % went past 1,000 ha. None of its 23 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 6 of 23, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 4.3 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 101 · 112 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 101 · 112.

How we know this
  • Perimeter: EFFIS (Copernicus), mapped on satellite imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 25 September 2023 to 28 September 2023. 104 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.

How we build fire pages: methodology

Where this data comes from

The perimeter and land cover come from the Copernicus European Forest Fire Information System (EFFIS), measured on MODIS and Sentinel-2 imagery and published under CC BY 4.0. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Public Domain). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ slightly from each country’s official figure.