Skip to content
worldfires
AU · Australia · –

North Burnett fire, October 2023 North Burnett, South Burnett

Out · last detection 1 Nov 2023, 03:19 UTC

The fire started on 27 October 2023 in North Burnett, Australia, and satellites saw it burning for 6 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 14,669 hectares from heat detections, spread across 2 municipalities.

It is the 56th largest in Queensland since 2016 (of 227 with a page). Number 38 in Australia in 2023, of 157.

Burnt area
14,669ha
GWIS perimeter (Copernicus)
Duration
6days
27 Oct 2023 – 1 Nov 2023
Municipalities hit
2
local government areas
Started on
27 Oct
2023
Heat detections
969
in a single hotspot: 189 MW
Danger at start
59
Extreme · FWI index
Average daily power
1.7GW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 27 Oct1 Nov
1 Nov 2023

How it evolved, day by day

27 Oct 2023 · 4,471 MW · 305 28 Oct 2023 · 2,203 MW · 404 29 Oct 2023 · 959 MW · 145 30 Oct 2023 · 912 MW · 100 31 Oct 2023 · 167 MW · 15 1 Nov 2023 · 0 MW · 0
27 Oct 29 Oct 31 Oct

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

34°high
62km/h · peak gust
12%lowest humidity

It had gone 21 days without rain (1 mm or more) when it started. Rain came after the fire: 2.2 mm on 6 Nov.

This area had burned before

50% of the perimeter overlaps earlier fires recorded since 2016: 3,372 ha in 2016, 2,538 ha in 2018, 34 ha in 2019, 1,029 ha in 2020, 1,700 ha in 2021, 653 ha in 2022. Part of it burned more than once, so the yearly figures add up to more than the 7,368 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 9.3% of the area of London (147 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. North Burnett where it started
    14,465 ha
    0.7 %
  2. 344 ha
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area2.2 ha
Residents< 20

Inside the perimeter there were about 2.2 hectares of built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Extreme FWI: 43 % of the area in Australia Strong wind: 39 % of the area in Australia Very dry air: 28 % of the area in Australia

Day High Min. humidity Peak gust Rain Danger (FWI)
27 Oct 27.3 °C 12 % 62 km/h 0.0 mm Extreme 59
28 Oct 27.5 °C 21 % 40 km/h 0.0 mm Very high 44
29 Oct 28.4 °C 23 % 33 km/h 0.0 mm Very high 39
30 Oct 30.5 °C 25 % 32 km/h 0.0 mm High 37
31 Oct 34.2 °C 25 % 36 km/h 0.0 mm Very high 44
1 Nov 33.3 °C 22 % 53 km/h 0.0 mm High 36
2 Nov after 29.7 °C 31 % 39 km/h 0.0 mm High 38
3 Nov after 28.9 °C 35 % 37 km/h 0.0 mm Very high 42
4 Nov after 29.9 °C 37 % 38 km/h 0.1 mm Very high 38
5 Nov after 29.0 °C 42 % 37 km/h 0.7 mm High 27
6 Nov after 26.4 °C 50 % 38 km/h 2.2 mm Moderate 21

Its twins: fires that started in the same weather

It started with an FWI of 59.4, a minimum humidity of 12% and 21 days without rain. Fires in the area that started in weather like this since 2016: 7.

FWI at the start 59.4
Minimum humidity 12 %
Days without rain 21
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Western Downs fire, February 2023
44,981 ha 18 days FWI 61.0 Min. humidity 10 % 134 km away, in 2023

First rain (1 mm or more) after it ended: 1.0 mm on 2 Mar.

What happened to them

Fires in the area that started in similar weather: 7. With fewer than 15 we give no figures: they would be more noise than signal.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

2.2 mmfirst rain
6 Nov5 days after it ended
62km/h · max. gust

It was considered over on 1 Nov, and on 6 Nov 2.2 mm fell. We do not know whether the rain or the firefighters put it out.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 20 Oct 2023
After · 8 Nov 2023

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 30 October 2023 the air beside the fire reached 46 µg/m³ of PM2.5. That day averaged 20: 1.3 times the WHO daily guideline (15).

PM2.5 peak46 µg/m³
Days over the guideline2 days
PM1067 µg/m³
Optical depth0.79
25 Oct27 Oct29 Oct31 Oct2 Nov
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 969Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the North Burnett fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 27 October 2023 to 1 November 2023 (6 days). The perimeter dates it from 27 October 2023 to 31 October 2023.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 14,669 hectares (146.7 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: North Burnett (14,465 ha, 0.7 %); South Burnett (344 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 34.2 °C, humidity dropped to 12 % and gusts hit 62 km/h. The fire danger index (FWI) reached 59, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 31 October 2023 → 1 November 2023.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 27 October 2023 to 31 October 2023. 969 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.