Skip to content
worldfires
AU · Australia · –

North Burnett fire, 4 November 2020 North Burnett, South Burnett

Out · last detection 23 Nov 2020, 14:03 UTC

The fire started on 4 November 2020 in North Burnett, Australia, and satellites saw it burning for 20 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 8,483 hectares from heat detections, spread across 2 municipalities.

It is the 117th largest in Queensland since 2016 (of 227 with a page). Number 31 in Australia in 2020, of 67.

Burnt area
8,483ha
GWIS perimeter (Copernicus)
Duration
20days
4 Nov 2020 – 23 Nov 2020
Municipalities hit
2
local government areas
Started on
4 Nov
2020
Heat detections
758
in a single hotspot: 200 MW
Danger at start
11
Low · FWI index
Average daily power
408MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 4 Nov23 Nov
23 Nov 2020

How it evolved, day by day

4 Nov 2020 · 206 MW · 29 5 Nov 2020 · 313 MW · 41 6 Nov 2020 · 767 MW · 66 7 Nov 2020 · 80 MW · 12 8 Nov 2020 · 434 MW · 16 9 Nov 2020 · 1,579 MW · 150 10 Nov 2020 · 1,726 MW · 135 11 Nov 2020 · 922 MW · 64 12 Nov 2020 · 235 MW · 41 13 Nov 2020 · 126 MW · 22 14 Nov 2020 · 163 MW · 31 15 Nov 2020 · 387 MW · 47 16 Nov 2020 · 160 MW · 22 17 Nov 2020 · 161 MW · 13 19 Nov 2020 · 26 MW · 7 20 Nov 2020 · 74 MW · 17 21 Nov 2020 · 139 MW · 16 22 Nov 2020 · 120 MW · 13 23 Nov 2020 · 136 MW · 16
4 Nov 10 Nov 16 Nov 21 Nov

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

37°high
46km/h · peak gust
19%lowest humidity

It had gone 3 days without rain (1 mm or more) when it started. Rain came after the fire: 1.3 mm on 25 Nov.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 5.4% of the area of London (85 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. North Burnett where it started
    7,742 ha
    0.4 %
  2. 810 ha
    0.1 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area0.12 ha
Residents< 20

Inside the perimeter there were about 0.12 hectares of built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
4 Nov 29.3 °C 34 % 34 km/h 0.0 mm Low 11
5 Nov 33.2 °C 30 % 45 km/h 0.0 mm High 21
6 Nov 28.8 °C 19 % 34 km/h 0.0 mm High 23
7 Nov 30.0 °C 28 % 44 km/h 0.0 mm Moderate 19
8 Nov 25.8 °C 41 % 46 km/h 0.2 mm High 22
9 Nov 24.6 °C 35 % 44 km/h 0.0 mm High 22
10 Nov 26.6 °C 31 % 36 km/h 0.0 mm High 24
11 Nov 29.0 °C 25 % 40 km/h 0.0 mm Moderate 20
12 Nov 29.9 °C 25 % 42 km/h 0.0 mm High 22
13 Nov 29.1 °C 32 % 38 km/h 0.6 mm Moderate 20
14 Nov 33.3 °C 30 % 37 km/h 0.0 mm High 23
15 Nov 36.9 °C 22 % 37 km/h 0.0 mm High 25
16 Nov 34.9 °C 31 % 41 km/h 0.0 mm High 28
17 Nov 34.4 °C 31 % 34 km/h 2.4 mm High 27
18 Nov 29.5 °C 48 % 42 km/h 0.6 mm Low 9
19 Nov 31.5 °C 28 % 42 km/h 0.0 mm High 26
20 Nov 32.5 °C 25 % 38 km/h 0.0 mm High 28
21 Nov 32.4 °C 20 % 36 km/h 0.0 mm High 26
22 Nov 31.8 °C 28 % 36 km/h 0.0 mm High 29
23 Nov 32.9 °C 27 % 37 km/h 0.0 mm High 27
24 Nov after 34.7 °C 27 % 32 km/h 0.1 mm High 28
25 Nov after 30.0 °C 50 % 40 km/h 1.3 mm Moderate 17

Its twins: fires that started in the same weather

It started with an FWI of 11.1, a minimum humidity of 34% and 3 days without rain. Fires in the area that started in weather like this since 2016: 19.

FWI at the start 11.1
Minimum humidity 34 %
Days without rain 3
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

North Burnett fire, November 2016
10,256 ha 9 days FWI 15.9 Min. humidity 32 % 68 km away, in 2016

First rain (1 mm or more) after it ended: 3.1 mm on 13 Nov.

What happened to them

10 days
median duration
7,089 ha
median area
32 %
went past 10,000 ha
5.1 mm
rain at the end (median; 15 of 19 had it)

It burned an area similar to its twins (8,483 ha against a median of 7,089 ha) and lasted 20 days, against 10 days.

In 4 of 19, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 5.1 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

1.3 mmfirst rain
25 Nov2 days after it ended
46km/h · max. gust

It was considered over on 23 Nov, and on 25 Nov 1.3 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 15 of 19, with a median of 5.1 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 28 Oct 2020
After · 30 Nov 2020

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 758Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the North Burnett fire last?
GWIS (Copernicus) dates it between 4 November 2020 and 23 November 2020: 20 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 8,483 hectares (84.8 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: North Burnett (7,742 ha, 0.4 %); South Burnett (810 ha, 0.1 %).
What was the weather like?
During the fire the temperature reached 36.9 °C, humidity dropped to 19 % and gusts hit 46 km/h. The fire danger index (FWI) reached 29, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 19. Their median duration was 10 days and their median area 7,089 ha; 32 % went past 10,000 ha. In 4 of 19, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 5.1 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 758 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.